Letoto la Semi-Stainless Steel Split Pump e Tebileng

Tshebediso ya metsi qoelisoa submersible motor, rotor wear-resistant alloy sleeve le alloy thrust disc design.E tšoarella ho feta (oli e qoelisoang ka maqhubu, mochini o nang le rotor), o nang le botsoalle haholoanyane. metsi a seliba, tšebeliso e sireletsehileng.Sehlopha sa impeller se sebelisa matla a phahameng a khahlanong le lehlabathe le sa sebetsaneng le lisebelisoa tsa polymer tsa polymer, moralo o mocha oa likarolo tse tharo tsa hydraulic, impeller e phaphametseng, li-ceramic tse khahlanong le lehlabathe li apere ho hanyetsa, ho phahamisa ka ho feletseng, ho phalla ho hoholo.Metsi a tletseng metsi. enjene e ka qoela botebo ba limithara tse 300.

This product is a three-phase AC 380V (tolerance ± 5%), 50HZ (tolerance ± 1%) power supply system, designed for strict water quality requirements. The product is suitable for water temperature not higher than 20 °C, solid impurities content (mass ratio) is not greater than 0.01%, PH value (pH) between 6.5-8.5, hydrogen sulfide content is not greater than 1.5mg/L, chloride ion content is not greater than 400mg/L environment. This product is equipped with a closed or water-filled wet structure motor, before use must be submersible motor inner cavity filled with clean water to prevent false full, and then tighten the water and air bolts, otherwise not to use. The submersible pump must be completely immersed in water to work, penetration depth shall not exceed 70 meters, the distance from the bottom of the pump to the bottom of the well shall not be less than 3 meters. In addition, the well water flow should meet the continuous operation requirements of the submersible pump, the water output of the submersible pump should be controlled at 0.7-1.2 times the rated flow. When used, the well must be vertical, and the submersible pump can not be used horizontally or dumped, only vertical installation. To ensure safety, the submersible pump must match the cable according to the requirements and be equipped with external overload protection device, and it is strictly prohibited to conduct no-load test on the pump without water. This product is an ideal choice for providing high quality water source, and can be widely used in various industrial and civil water processing fields.

 This kind of well submersible pump is a clean water pump. It is strictly prohibited to dig new wells and extract sediments and turbid water. The voltage grade of the well pump is 380/50HZ. The submersible motor with other voltage grades needs to be customized. Underground cables must be waterproof cables and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have common comprehensive motor protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection, etc., to prevent timely tripping when abnormal conditions occur. The pump must be reliably grounded during installation and use, and it is strictly prohibited to push and pull the switch when the hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. The place where the pump is used must be set up with obvious "anti-electric shock" marks. Before going down the well or installation, the motor must be filled with distilled water or non-corrosive clean cold water in the internal chamber, and the drain bolt must be fastened. When testing the pump on the ground, water must be injected into the pump chamber to lubricate the rubber bearings. The instantaneous start time shall not exceed one second to check whether the direction is correct, and the direction is the same as the direction indicator. When the pump is erected, pay attention to safety to prevent injury from tilting. Strictly in accordance with the provisions of the pump lift and flow range of use, to avoid the pump in the low flow when the large flow or in the high lift appears in the large pull, resulting in extreme wear of thrust bearings and other components, the motor overload and burn. After the pump into the well, the insulation resistance between the motor and the ground should be measured, not less than 100MΩ. After the start, regular observation of voltage and current, and check whether the motor winding insulation meets the requirements of the provisions. If the location temperature of the pump storage is below the freezing point, the water in the motor cavity should be drained, so as not to damage the motor in winter low temperature freezing.

1. 1.Submersible pompong ea ho kenya e phethiloe, hlahloba hape ho hanyetsa ho kenya letsoho le ho tsamaisa likarolo tse tharo ho tloha ho switjha, hlahloba sesebelisoa le ho qala phoso ea ho kopanya lisebelisoa, haeba ho se na bothata, e ka qala teko, ka mor'a ho qala ha sesebelisoa. ho bonts'a hore na ho na le matla a fetang a nameplate a boletsoeng a lekantsoeng le a hona joale, ho shebella lerata la pompo le ts'ebetso ea vibrate, ntho e 'ngoe le e' ngoe e tloaelehile e ka kenngoa ts'ebetsong.
2. 2.Ts'ebetso ea pele ea pompo bakeng sa lihora tse 'nè, e lokela ho koaloa ka potlako ho leka ho hanyetsa mocheso oa motlakase oa motlakase, boleng ha boa lokela ho ba ka tlase ho 0.5 megaohm.
3. 3.Ka mor'a ho koala ha pompo, ho lokela ho qaloa ka mor'a nako ea metsotso e mehlano, ho thibela molamu oa metsi ka phala ha o na reflux ka ho feletseng e bakoang ke ho feteletseng ha motlakase le ho khathala.
4. 4.Ka mor'a hore pompo e kene ts'ebetsong e tloaelehileng, e le ho lelefatsa bophelo ba eona ba ts'ebeletso, ho hlahloba motlakase oa phepelo, ho sebetsa hona joale le ho hanyetsa ho kenya letsoho ho tloaelehile, haeba ho fumanoa boemo bo latelang, ho lokela ho koala hang-hang ho rarolla mathata.
5.  

 1 maemong a lekantsoeng, ea hajoale e feta 20%.

 2 boemo ba metsi bo matla ho ea karolong e kenang ea metsi, e bakang metsi a nakoana.

 3 pompo e ka tlas'a metsi ho sisinyeha ho matla kapa lerata.

 4 phepelo ea motlakase e ka tlase ho 340 volts.

 5 fuse e chesitse karolo e itseng.

 6 tšenyo ea lipeipi tsa metsi.

 Enjene e 7 ea ho hanyetsa mocheso oa mocheso e ka tlase ho 0.5 megaohm.

5. 5. Ho arola likarolo:

 1 lokolla tether ea cable, tlosa karolo ea liphaephe, tlosa poleiti ea terata.

 2 fafatsa bolt ea metsi, beha metsi ka phaposing ea motlakase.

 3 tlosa filthara, lokolla screw e tsitsitseng holim'a coupling ho lokisa shaft ea motor.

 4 fafatsa bolt e kopanyang karolo e kenang ea metsi le enjene, 'me u arole pompo ho enjene (ela hloko cushion ea yuniti ha u arohana, ho thibela ho kobeha ha shaft ea pompo)

 5 tatellano ea disassembly ea pompo ke: (sheba setšoantšo sa 1) karolo ea ho kenya metsi, impeller, khetla ea ho kheloha, impeller...... hlahloba 'mele oa valve, ha u tlosa mochine, sebelisa lisebelisoa tse khethehileng ho lokolla letsoho la conical la e tsitsitseng. impeller pele, 'me u qobe ho khumama le ho senya pompo ea pompo nakong ea ho qhaqhoa.

 6 ts'ebetso ea ho qhaqhoa ha enjene ke: (sheba setšoantšo sa 1) beha enjene sethaleng, 'me u tlose linate, botlaaseng, nate ea hlooho ea shaft, thrust plate, senotlolo, setulo se ka tlase sa tataiso le bolt ea hlooho e habeli ho tloha tlase ho motlakase ka lehlakoreng le leng, ebe o ntša rotor (ela hloko hore u se ke ua senya sephutheloana sa terata) 'me qetellong u tlose karolo e kopanyang le setulo se ka holimo sa tataiso.

 Kopano ea lihlopha tse 7: pele ho kopano, mafome le litšila tsa likarolo li lokela ho hloekisoa, 'me bokaholimo ba ho kopanya le li-fasteners li koahetsoe ka sealant, ebe li bokelloa ka tatellano e fapaneng ea disassembly (mochine oa motlakase o ea holimo le tlaase ka mor'a kopano hoo e ka bang e le' ngoe. millimeter), ka mor'a kopano, coupling e lokela ho ba e tenyetsehang, ebe mochine oa tlhahlobo ea skrine oa filthara. Lipompompo tse ka tlas'a metsi li tla ntšoa ka selibeng bakeng sa ho qhaqha le ho hlokomeloa ho latela Article 5 ka mor'a selemo sa ts'ebetso, kapa ka tlase ho selemo sa ts'ebetso empa lilemo tse peli tsa nako ea ho qoela, 'me likarolo tse tsofetseng li tla nkeloa sebaka.

Sehlahisoa sena ke pompo ea motlakase e ka tlas'a metsi e nang le ts'ebetso e ntle haholo. Moqapi oa eona o ikhethang o loketse ho sebelisoa liketsahalong tse sa tšoaneng. Ebang ke ho thibela motlakase hore o se ke oa hatsela mariha kapa ho thibela mafome ha o sa sebelisoe nako e telele, pompo ena ea motlakase e ka tlas'a metsi e ka finyella litlhoko tsa hau bakeng sa tlhokomelo ea thepa. Ho bonolo ho sebetsa ebile ho bonolo ho e hlokomela. Latela feela mehato e bukeng ea tlhokomelo e nepahetseng le polokelo, e ka lelefatsang bophelo ba tšebeletso ea sehlahisoa ka katleho. Fumana pompo ena ea motlakase e ka tlas'a metsi hona joale 'me u etse hore mosebetsi oa hau o be bonolo le ho sebetsa hantle haholoanyane!

01 Ho noa metsi a seliba se tebileng

02 Phepelo ea metsi e phahameng

03 phepelo ea metsi thabeng 

04 metsi a tora

05 Ho nosetsa ka temo

06 ho nosetsa serapeng

07 ho noa metsi a noka

08 metsi a malapeng