150QJ Pompo e Tebileng e Ngobeletsoeng hantle

Etsa tšebetso ea OEM! Ho ea ka litlhoko tsa mosebelisi, moralo le tlhahiso ea mefuta e fapaneng ea litlhoko tse ikhethang tsa enjene ea submersible e sa tloaelehang le pompo. Litekanyetso tsa ts'ebetsong ea sehlahisoa: GB/T2816-2014 "pompo e kenang hantle", GB/T2818-2014 "enjene e kenang hantle ea asynchronous". WhatsApp: 17855846335

TS'ELISO HONA PDF DOWNLOAD

Lintlha

Li-tag

Tlhaloso ea Sehlahisoa

QJ series submersible electric pump is a kind of lifting machine directly connected to the submersible motor and pump to work in the water. This series of pumps are vertical, with small footprint, compact structure, simple installation, easy maintenance and repair. It is widely used in agricultural irrigation, municipal engineering, water conservancy, urban water supply and drainage, as well as industrial and mining enterprises, disaster relief drainage and other fields. The flow range is 5-500m3/h, the head is 4-800m, and the power is 3-315KW. This submersible electric pump can efficiently lift and transport water, providing reliable water supply protection for various fields. Its stable performance and solid structure make it an indispensable machine in various water conservancy projects.

Maemo a Tšebeliso

This product is a three-phase AC 380V (tolerance ± 5%), 50HZ (tolerance ± 1%) power supply pump, is designed for water requirements of strict occasions. The product is suitable for water temperature not exceeding 20 °C, solid impurities content (mass ratio) is not greater than 0.01%, PH value (pH) is 6.5-8.5, hydrogen sulfide content is not greater than 1.5mg/L, chloride ion content is not greater than 400mg/L water quality environment. The pump adopts closed or water-filled wet structure motor, the inner cavity must be filled with clean water before use to prevent virtual filling, and then tighten the water injection and pressure relief bolts. The product shall be completely immersed in water, the penetration depth shall not exceed 70m, and the distance from the bottom of the well shall not be less than 3m. The water source required by the pump shall be able to meet its output demand and continuous operation, and the output of the pump shall be controlled at 0.7-1.2 times of the rated flow. The well shall be vertical, and the horizontal or inclined use shall be prohibited, and the cable shall be matched according to the requirements and equipped with external overload protection device. It is strictly prohibited to conduct no water test on the electric pump.

Tlhaloso ea Mohlala

Read More About deep water well pump

Karolo ea Reference ea Mohlala

Mohlala	Phallo (m3/h)	Hlooho (m)	Rotatingspeed (fetola/ ntlha)	Pompo ea metsi(%)	Sethala bophara (mm)	E sebetsa hantle bophara(mm)	E lekantsoe matla (KW)	E lekantsoe motlakase (V)	E lekantsoe jwale (A)	Monyetla (%)	power factorcosφ	Yuniti Radial Maximu size(mm)	Ela hloko
150QJ5-100	5	100	2850	58	40	150	3	380	7.9	74.0	0.78	143
150QJ5-150	5	150	2850	58	40	150 holimo	4	380	10.25	75.0	0.79	143
150QJ5-200		200					5.5		13.74	76.0	0.8
150QJ5-250		250					7.5		18.5	77.0	0.8
150QJ5-300		300					9.2		22.12	78.0	0.81
150QJ10-50	10	50	2850	63	50	150hodimo	3	380	7.9	74.0	0.78	143
150QJ10-66		66					4		10.25	75.0	0.79
150QJ10-78		78					4		10.25	75.0	0.79
150QJ10-84		84					5.5		13.74	76.0	0.8
150QJ10-91		91					5.5		13.74	76.0	0.8
150QJ10-100		100					5.5		13.74	76.0	0.8
150QJ10-128		128					7.5		18.5	77.0	0.8
150QJ10-150		150					7.5		18.5	77.0	0.8
150QJ10-200		200					11		26.28	78.5	0.81
150QJ10-250		250					13		30.87	79.0	0.81
150QJ10-300		300					15		35.62	79.0	0.81
150QJ15-33	15	33	2850	63	50	150hodimo	3	380	7.9	74.0	0.78	143
150QJ15-42		42					4		10.25	75.0	0.79
150QJ15-50		50					4		10.25	75.0	0.79
150QJ15-60		60					5.5		13.74	76	0.8
150QJ15-65		65					5.5		13.74	76.0	0.8
150QJ15-72		72					5.5		13.74	76.0	0.8
150QJ15-81		81					7.5		18.5	77.0	0.8
150QJ15-90		90					7.5		18.5	77.0	0.8
150QJ15-98		98					7.5		18.5	77.0	0.8
150QJ15-106		106					9.2		22.12	78.0	0.81
150QJ15-114		114					9.2		22.12	78.0	0.81
150QJ15-130		130					11		26.28	78.5	0.81
150QJ15-146		146					13		30.87	79.0	0.81
150QJ15-162		162					13		30.87	79.0	0.81
150QJ15-180		180					15		35.62	79.0	0.81
150QJ20-26	20	26	2850	64	50	150hodimo	3	380	7.9	74.0	0.78	143
150QJ20-33		33					3		7.9	74.0	0.78
150QJ20-39	20	39	2850	64	50	150hodimo	4	380	10.25	75.0	0.79	143
150QJ20-52		52					5.5		13.74	76.0	0.8
150QJ20-65		65					7.5		18.5	77.0	0.8
150QJ20-78		78					7.5		18.5	77.0	0.8
150QJ20-91		91					9.2		22.12	78.0	0.81
150QJ20-98		98					9.2		22.12	78.0	0.81
150QJ20-104		104					11		26.28	78.5	0.81
150QJ20-111		111					11		26.28	78.5	0.81
150QJ20-130		130					13		30.87	79.0	0.81
150QJ20-143		143					13		30.87	79.0	0.81
150QJ20-156		156					15		35.62	79.0	0.81
150QJ20-182		182					18.5		43.12	79.5	0.82
150QJ25-24	25	24	2850	64	65	150hodimo	3	380	7.9	74.0	0.78	143
150QJ25-32		32					4		10.25	75.0	0.79
150QJ25-40		40					5.5		13.74	76.0	0.8
150QJ25-48		48					5.5		13.74	76.0	0.8
150QJ25-56		56					7.5		18.5	77.0	0.8
150QJ25-64		64					7.5		18.5	77.0	0.8
150QJ25-72		72					9.2		22.12	78.0	0.81
150QJ25-77		77					9.2		22.12	78.0	0.81
150QJ25-84		84					11		26.28	78.5	0.81
150QJ25-96		96					11		26.28	78.5	0.81
150QJ25-104		104					13		30.87	79.0	0.81
150QJ25-110		110					13		30.87	79.0	0.81
150QJ25-120		120					15		35.62	79.0	0.81
150QJ25-128		128					15		35.62	79.0	0.81
150QJ25-136		136					18.5		43.12	79.5	0.82
150QJ25-154		154					18.5		43.12	79.5	0.82
150QJ32-18	32	18	2850	66	80	150hodimo	3	380	7.9	74.0	0.78	143
150QJ32-24		24					4		10.25	75.0	0.79
150QJ32-30		30					5.5		13.74	76.0	0.8
150QJ32-36		36					5.5		13.74	76.0	0.8
150QJ32-42	32	42	2850	66	80	150hodimo	7.5	380	18.5	77.0	0.8	143
150QJ32-54		54					9.2		22.12	78.0	0.81
150QJ32-66		66					11		26.28	78.5	0.81
150QJ32-72		72					13		30.87	79.0	0.81
150QJ32-84		84					13		30.87	79.0	0.81
150QJ32-90		90					15		35.62	79.0	0.81
150QJ32-96		96					15		35.62	79.0	0.81
150QJ32-114		114					18.5		43.12	79.5	0.82
150QJ40-16	40	16	2850	66	80	150hodimo	3	380	7.9	74.0	0.78	143
150QJ40-24		24					5.5		13.74	76.0	0.8
150QJ40-30		30					5.5		13.74	76.0	0.8
150QJ40-40		40					7.5		18.5	77.0	0.8
150QJ40-48		48					9.2		22.12	78.0	0.81
150QJ40-56		56					11		26.28	78.5	0.81
150QJ40-64		64					13		30.87	79.0	0.81
150QJ40-72		72					13		30.87	79.0	0.81
150QJ40-80		80					15		35.62	79.0	0.81
150QJ40-96		96					18.5		43.12	79.5	0.82
150QJ50-16	50	16	2850	65	80	150hodimo	4	380	10.25	75.0	0.79	143
150QJ50-22		22					5.5		13.74	76.0	0.8
150QJ50-28		28					7.5		18.5	77.0	0.8
150QJ50-34		34					9.2		22.12	78.0	0.81
150QJ50-40		40					9.2		22.12	78.0	0.81
150QJ50-46		46					11		26.28	78.5	0.81
150QJ50-52		52					13		30.87	79.0	0.81
150QJ50-57		57					15		35.62	79.0	0.81
150QJ50-74		74					18.5		43.12	79.5	0.82
150QJ50-80		80					18.5		43.12	79.5	0.82
150QJ63-12	63	12	2850	60	80	150hodimo	4	380	10.25	75.0	0.79	143
150QJ63-18		18					7.5		18.5	77.0	0.8
150QJ63-30		30					9.2		22.12	78.0	0.81
150QJ63-36		36					11		26.28	78.5	0.81
150QJ63-42	63	42	2850	60	80	150hodimo	13	380	30.87	79.0	0.81	143
150QJ63-48		48					15		35.62	79.0	0.81
150QJ63-54		54					18.5		43.12	79.5	0.82
150QJ15-220	15	220	2850		50	150hodimo	18.5	380	43.12			143
150QJ15-260		260					20		49.7
150QJ15-300		300					25		56.5
150QJ20-210	20	210	2850		50	150hodimo	20	380	49.7			143
150QJ20-240		240					25		56.5
150QJ20-290		290					30		66.6
150QJ25-175	25	175	2850		65	150hodimo	20		49.7			143
150QJ25-200		200					30		66.6
150QJ25-290		290					37		82.1
150QJ32-120	32	120	2850		80	150hodimo	20	380	49.7			143
150QJ32-132		132					25		56.5
150QJ32-156		156					30		66.6
150QJ32-190		190					37		82.1
150QJ32-240		240					45		96.9
150QJ40-110	40	110	2850		80	150hodimo	20	380	49.7			143
150QJ40-121		121					25		56.5
150QJ40-143		143					30		66.6
150QJ40-176		176					37		82.1
150QJ40-220		220					45		96.9
150QJ50-100	50	100	2850		80	150hodimo	20	380	49.7			143
150QJ50-110		110					25		56.5
150QJ50-130		130					30		66.6
150QJ50-160		160					37		82.1
150QJ50-200		200					45		96.9

Litlhokomelo tsa Tšireletso

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade 380/50HZ, the use of other voltage grades of submersible motors need to be customized.The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious sign:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering and steering instructions are the same.When the pump is upright, pay attention to safety, prevent overturning injury.

5, this pump has won wide acclaim for its efficiency and reliability. It is used in strict accordance with the applicable lift and flow range stipulated by the electric pump to avoid excessive wear of thrust bearings and other parts caused by large flow at low lift or excessive pumping force at high lift, resulting in motor overload and burnout. After being put into the well, the insulation resistance to the ground of the electric pump shall be measured and shall not be less than 100MΩ. After starting, the voltage and current shall be observed regularly, and the insulation of the motor winding shall be checked to meet the specified requirements. If the storage temperature is below freezing, the water in the pump shall be dried to avoid damage to the motor due to low temperature freezing in the motor cavity. This electric pump is your reliable choice, which can provide stable and reliable power support for your work.

Selelekela sa Sebopeho

Structure brief: pump part is mainly composed of pump shaft, impeller, diversion shell, rubber bearing, check valve body (optional parts) and other components.The motor part is mainly composed of base, pressure regulating film, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand ring, water inlet joint, lead cable and other components.

Likarolo tse kholo tsa sehlahisoa li kenyelletsa:

1.The motor is a water-sealed wet submersible three-phase asynchronous motor.The motor cavity is filled with clean water for cooling the motor and lubricating the bearing.The voltage regulating film at the bottom of the motor is used to regulate the temperature rise caused by the motor.The expansion and contraction pressure difference of the body water caused by the change.
2. In order to prevent the sand particles in the well water from entering the motor, two oil seals are installed at the upper end of the motor shaft extension, and a sand ring is installed to form a sand prevention structure.
3. In order to prevent the pump shaft from jumping at startup, the pump shaft is connected with the motor shaft through a coupling, and a thrust bearing is installed at the lower part of the motor.
4. The lubrication of the motor and pump bearing is water lubrication.
5. The motor stator winding is made of high-quality submersible motor winding wire, with excellent insulation performance.
6. The pump is designed by computer CAD, with simple structure and excellent technical performance.

Read More About deep well pump installation

Kenya

(1) Tokisetso pele ho ho kenya:
1. Lekola hore na pompo e ka tlas'a metsi e kopana le maemo a ts'ebeliso le boholo bo boletsoeng bukeng ea tataiso.
2. Ho sebelisa obiect e boima e nang le bophara bo lekanang le bophara bo boholo ba ka ntle ba pompo e ka tlas'a metsi, lekanya hore na inneldiameter ea seliba e ka lumellana le pompo e ka tlas'a metsi, 'me u lekanye hore na botebo ba seliba bo finyella litlhoko tsa ho kenya.
3. Lekola hore na seliba se hloekile le hore na metsi a seliba a litšila. Le ka mohla u se ke ua sebelisa pompo ea motlakase e ka tlas'a metsi ho hlatsoa seretse sa pompo ea welor le metsi a lehlabathe ho qoba tšenyo ea pele ho nako ea pompo ea motlakase e ka tlase ho metsi.
4. Sheba hore na boemo ba letlapa la ho kenya welhead le loketse le hore na le khona ho mamella boleng ba yuniti kaofela.
5. Sheba hore na likarolo tsa pompo tse ka tlas'a metsi li phethehile 'me li kentsoe ka nepo ho ea ka setšoantšo sa kopano se bukeng ea litaelo Tlosa skrine ea sefe 'me u potolohe sekopanyi ho bona hore na se potoloha ka mokhoa o bonolo.
6. Hlakola sekoti sa metsi 'me u tlatse lesoba la motlakase ka metsi a hloekileng, a sa cheng (hlokomela. etsa bonnete ba hore u se tlatse), ebe u tiisa sekheo sa metsi. Kamora lihora tse 12 tsa ente ea metsi, khanyetso ea enjene ha ea lokela ho ba ka tlase ho 150M Q ha e lekantsoe ka tafole ea 500V e sisinyehang.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

Sets'oants'o sa ts'ebetso ea terata ea cable e kenyellelitsoeng ka tsela e latelang:
Read More About deep well pump installation diagram

8. Sebelisa multimeter ho hlahloba hore na lithapo tsa mekhahlelo e meraro li hokahane le hore na ho hanyetsa ha DC ho batla ho leka-lekana.
9. Lekola hore na matla a potoloho le a transformer a tletse, ebe o hokahanya sesebelisoa sa ts'ireletso ea overload kapa lisebelisoa tsa ho qala. Sheba Tafole ea 2 bakeng sa mefuta e ikhethileng, ebe u tšela bakete ea metsi ka har'a pompo ea metsi ho tsoa sebakeng sa pompo ea metsi ho tlotsa li-bearings tsa rabara ka har'a pompo, ebe u beha pompo ea motlakase e ka tlas'a metsi e otlolohile ebile e tsitsitse. Qala (e seng ho feta motsotsoana) 'me u hlahlobe hore na tataiso ea tsamaiso e lumellana le letšoao la ho tsamaisa. Haeba ho se joalo, fapanyetsana lihokelo leha e le life tse peli tsa mohala oa mekhahlelo e meraro. Ebe u kenya filthara 'me u itokisetse ho theohela selibeng. Haeba e sebelisoa liketsahalong tse khethehileng (tse kang liforo, liforo, linōka, matangoana, matangoana, joalo-joalo), pompo ea motlakase e tlameha ho thehoa ka mokhoa o tšepahalang.

(2) Lisebelisoa le lisebelisoa tsa ho kenya:
1. Para e le 'ngoe ea liketane tse phahamisang lithane tse fetang tse peli.
2. Tripod e nang le bophahamo bo otlolohileng bo sa feteng limithara tse 'nè.
3. Liropo tse peli tse leketlileng (lithapo tsa terata) tse ka jarang boima ba lithane tse fetang e le 'ngoe (li ka jara boima ba sete e felletseng ea lipompo tsa metsi).
4. Kenya lipara tse peli tsa li-clamp (li-splints).
5. Li-wrenches, lihamore, screwdrivers, lisebelisoa tsa motlakase le lisebelisoa, joalo-joalo.

(3) Ho kenya pompo ea motlakase:
1. Setšoantšo sa ho kenya pompo ea motlakase e ka tlas'a metsi e bontšoa ho Setšoantšo sa 2. Litekanyo tse khethehileng tsa ho kenya li bontšoa ho Lethathamo la 3 "Lethathamo la Litekanyo tsa ho Kenyeletsoa ha Pompo ea Motlakase ea Submersible".

2. Lipompo tsa motlakase tse ka tlas’a metsi tse nang le hlooho e ka tlaase ho limithara tse 30 li ka phahamisoa ka ho toba selibeng ho sebelisa liphaepe le lithapo tsa terata kapa lithapo tse ling tsa hemp tse ka khonang ho jara boima bo feletseng ba mochine kaofela, lipeipi tsa metsi, le metsi a liphaephe.

3. Lipompo tse nang le hlooho ea limithara tse fetang 30 li sebelisa liphaephe tsa tšepe, 'me tatellano ea ho kenya e tjena:
① Sebelisa clamp ho tiisa ntlha e ka holimo ea karolo ea pompo ea metsi (enjene le pompo ea metsi li se li hokahantsoe ka nako ena), e phahamise ka ketane e leketlileng, 'me butle-butle e e tlamelle ka selibeng ho fihlela u Beha thipa holim'a seliba ebe u tlosa ketane e leketlileng.
② Sebelisa para e 'ngoe ea li-clamp ho tlamella phala, u e phahamise ka ketane e leketlileng e bolelele ba lisenthimithara tse 15 ho tloha flange, 'me u e theole butle. Pakeng tsa peipi flange le pompo flange Beha pete ea rabara sebakeng 'me u tiise phala 'me u pompe ka ho lekana ka liboutu, linate le lihlatsoana tsa selemo.
③ Phahamisa pompo e ka tlas'a metsi hanyenyane, tlosa sekoti karolong e ka holimo ea pompo ea metsi, tlamella thapo ka thata peiping ea metsi ka tepi ea polasetiki, 'me u e tlamele butle ho fihlela Sekoti se behoa selibeng.
④ Sebelisa mokhoa o tšoanang ho fasa lipeipi tsohle tsa metsi selibeng.
⑤Ka mor'a hore thapo e etellang pele e hokahane le sesebelisoa sa taolo, e hokahane le phepelo ea motlakase ea mekhahlelo e meraro.

(4) Lintho tseo u lokelang ho li ela hloko nakong ea ho kenya:
1. Haeba ketsahalo ea jamming e fumanoa nakong ea ho pompa, fetola kapa u hule phala ea metsi ho hlōla ntlha ea ho jamming. Haeba mehato e fapaneng e ntse e sa sebetse, ka kopo U se ke ua qobella pompo hore e theohe ho qoba tšenyo ea pompo ea motlakase e ka tlas'a metsi le seliba.
2. Nakong ea ho kenya, pente ea rabara e lokela ho behoa ka lehlakoreng la phala e 'ngoe le e' ngoe 'me e tiisetsoe ka tsela e tšoanang.
3. Ha pompo ea metsi e theoleloa ka selibeng, e lokela ho behoa bohareng ba phala ea seliba ho thibela pompo ho matha leboteng la seliba nako e telele, ho etsa hore pompo e thothomele le motor e fiele le ho chesa. .
4. Etsa qeto ea botebo ba pompo ea metsi ho ea tlaase ho seliba ho ea ka lehlabathe le phallang le maemo a silt a seliba. U se ke ua pata pompo ka seretseng. Sebaka ho tloha pompong ea metsi ho ea tlase ho seliba hangata ha se ka tlase ho limithara tse 3 (sheba setšoantšo sa 2).
5. Botebo ba ho kena ha metsi ba pompo ea metsi ha boa lokela ho ba tlase ho limithara tse 1-1.5 ho tloha boemong ba metsi a matla ho ea ho node ea metsi (sheba setšoantšo sa 2). Ho seng joalo, li-bearings tsa pompo ea metsi li ka senyeha habonolo.
6. Phahamiso ea pompo ea metsi e ke ke ea ba tlase haholo. Ho seng joalo, belofo ea heke e hloka ho kenngoa pompong ea metsi ea seliba ho laola phallo ea pompo sebakeng sa phallo e lekantsoeng ho thibela enjene hore e se ke ea tlala le ho cha ka lebaka la likhahla tse kholo tsa phallo.
7. Ha pompo ea metsi e ntse e sebetsa, tlhahiso ea metsi e lokela ho ba e tsoelang pele esita le, hona joale e lokela ho ba e tsitsitseng (tlas'a maemo a sebetsang a lekantsoeng, ka kakaretso ha a na ho feta 10% ea hona joale e lekantsoeng), 'me ha hoa lokela ho ba le ho thothomela kapa lerata. Haeba ho na le ntho e sa tloaelehang, mochine o lokela ho emisoa ho fumana sesosa le ho o felisa.
8. Ha u kenya, ela hloko boemo ba mohala oa motlakase oa motlakase (sheba setšoantšo sa 2). Ha phala ea metsi e le phala ea tšepe, e etelle pele ho tloha ho clamp ea seliba; ha phala ea metsi e le phala ea polasetiki, e etelle pele ho tloha letšoao la motheo la pompo ea motlakase.

Tlhokomelo le Tlhokomelo

(1)After the submersible pump is installed, check the insulation resistance and three-phase conduction from the switch again, check whether the instrument and the connection of the start equipment are wrong, if there is no problem, the trial machine can be started, and observe whether the indicator readings of the instrument exceed the rated voltage and current specified on the nameplate after the start, and observe whether the pump has noise and vibration phenomenon, and put into operation if everything is normal.
(2)After the first operation of the pump for four hours, the motor should be shut down to test the thermal insulation resistance quickly, and its value should not be less than 0.5 megaohm.
(3)After the pump is shut down, it should be started after five minutes to prevent the water column in the pipe from being completely reflowed and causing excessive motor current and burnout.
(4)After the pump is put into normal operation, in order to prolong its service life, it is necessary to check whether the supply voltage, working current and insulation resistance are normal regularly. If the following conditions are found, the pump should be shut down immediately to troubleshoot.

1 In the rated condition, the current exceeds 20%.

2 Boemo ba metsi a matla bo theohela karolong e kenang ea metsi, e bakang metsi a nakoana.

3 Pompo e ka tlas'a metsi e na le ho thothomela ho matla kapa lerata.

4 Matla a phepelo a tlase ho feta 340 volts.

5 Fuse e chesitsoe ka mollo.

6 Peipi ea phepelo ea metsi e senyehile.

7 The motor's thermal insulation resistance is lower than 0.5 megaohm.

(5)Unit disassembly:

1 Untie the cable tie, remove the pipeline part, and remove the wire plate.

2 fafatsa bolt ea metsi, beha metsi ka phaposing ea motlakase.

3 tlosa filthara, lokolla screw e tsitsitseng holim'a coupling ho lokisa shaft ea motor.

4 fafatsa bolt e kopanyang karolo e kenang ea metsi le enjene, 'me u arole pompo ho enjene (ela hloko cushion ea yuniti ha u arohana, ho thibela ho kobeha ha shaft ea pompo)

5 tatellano ea disassembly ea pompo ke: (sheba setšoantšo sa 1) karolo ea ho kenya metsi, impeller, khetla ea ho kheloha, impeller...... hlahloba 'mele oa valve, ha u tlosa mochine, sebelisa lisebelisoa tse khethehileng ho lokolla letsoho la conical la e tsitsitseng. impeller pele, 'me u qobe ho khumama le ho senya pompo ea pompo nakong ea ho qhaqhoa.

6 ts'ebetso ea ho qhaqhoa ha enjene ke: (sheba setšoantšo sa 1) beha enjene sethaleng, 'me u tlose linate, botlaaseng, nate ea hlooho ea shaft, thrust plate, senotlolo, setulo se ka tlase sa tataiso le bolt ea hlooho e habeli ho tloha tlase ho motlakase ka lehlakoreng le leng, ebe o ntša rotor (ela hloko hore u se ke ua senya sephutheloana sa terata) 'me qetellong u tlose karolo e kopanyang le setulo se ka holimo sa tataiso.

Kopano ea lihlopha tse 7: pele ho kopano, mafome le litšila tsa likarolo li lokela ho hloekisoa, 'me bokaholimo ba ho kopanya le li-fasteners li koahetsoe ka sealant, ebe li bokelloa ka tatellano e fapaneng ea disassembly (mochine oa motlakase o ea holimo le tlaase ka mor'a kopano hoo e ka bang e le' ngoe. millimeter), ka mor'a kopano, coupling e lokela ho ba e tenyetsehang, ebe mochine oa tlhahlobo ea skrine oa filthara. Lipompompo tse ka tlas'a metsi li tla ntšoa ka selibeng bakeng sa ho qhaqha le ho hlokomeloa ho latela Article 5 ka mor'a selemo sa ts'ebetso, kapa ka tlase ho selemo sa ts'ebetso empa lilemo tse peli tsa nako ea ho qoela, 'me likarolo tse tsofetseng li tla nkeloa sebaka.

Polokelo le Tlhokomelo

In order to ensure long-term use of your submersible pump, we strongly recommend that you drain the water in all motor cavities especially in winter to prevent the motor from freezing; at the same time, roll up the cable and tie it well. Store the equipment in a room without corrosive substances and gases, with the temperature below 40 °C. In addition, if you do not use the submersible pump for a long time, be sure to pay attention to rust prevention measures. These simple steps will help you maintain the performance of the equipment and extend its service life.

Ho Apara Likarolo