The 200QJ Series Deep Well Submersible Pump is a high-efficiency water lifting solution designed for direct integration with submersible motors. Featuring a vertical, compact structure, this series minimizes the installation footprint while maximizing operational performance. It is engineered for versatility, making it an ideal choice for agricultural irrigation, municipal engineering, urban water supply, and industrial mining operations, as well as drought relief and flood drainage projects.
Built for reliability and stability, the 200QJ series supports a broad operational range with flow rates from 5 to 500m³/h, lift heights reaching up to 800m, and power capacities between 3 and 315KW. By utilizing advanced CAD design and high-quality insulation materials, these pumps ensure consistent performance in demanding environments, providing a robust solution for deep-well water extraction and high-pressure fluid transport.
Detailed Parameters
| Flow Range | 5 - 500 m³/h | Max Lift Head | 4 - 800 m |
|---|---|---|---|
| Power Range | 3 - 315 KW | Rated Voltage | Three-phase AC 380V (±5%) |
| Frequency | 50Hz (±1%) | Water Temperature | ≤ 20 °C |
| PH Value Range | 6.5 - 8.5 | Solid Impurities | ≤ 0.01% (mass ratio) |
| Chloride Ion Content | ≤ 400 mg/L | Hydrogen Sulfide | ≤ 1.5 mg/L |
Key Advantages
Superior Durability
Equipped with high-quality insulation winding and a sand-prevention structure to protect the motor from well contaminants.
Efficient Cooling
Water-filled wet submersible motor design ensures optimal cooling and bearing lubrication for continuous operation.
Precision Engineering
Computer CAD design ensures a simple yet high-performance structure with optimized hydraulic efficiency.
Easy Installation
Compact vertical design allows for easy deployment in narrow wellbores with simplified maintenance access.
Stable Performance
Reliable thrust bearings and couplings prevent shaft migration, ensuring steady flow and long-term stability.
Wide Application
Perfectly suited for deep well intake, high-rise water supply, mountain irrigation, and domestic water needs.
Product Gallery
Management Platforms
Precision Assembly
Strict quality control during the coupling of pump and motor to ensure perfect alignment.
Insulation Testing
Rigorous 500V shaking table tests to ensure insulation resistance meets 150MΩ standards.
Protection Systems
Integrated overload, short-circuit, and phase protection for maximum motor safety.
Waterproof Sealing
Multi-layer high-pressure insulation taping for waterproof cable joints in deep wells.
Depth Optimization
Optimized positioning (at least 3m from well bottom) to prevent mud ingestion.
Routine Maintenance
Standardized annual inspection cycles to replace wearing parts and maintain efficiency.
Investment Return Comparison
| Feature | Standard Pumps | 200QJ Series |
|---|---|---|
| Energy Efficiency | Moderate | High (Optimized CAD) |
| Service Life | Short to Medium | Long-term (Water Lubed) |
| Installation Cost | Complex/High | Simplified/Low |
| Maintenance Frequency | Frequent | Reduced (Robust Design) |
| Operational Stability | Variable | High Stability |
Frequently Asked Questions
The pump should be completely submerged, with a diving depth not exceeding 70m, and the bottom of the pump must be at least 3m away from the bottom of the well to avoid pumping sediment.
Ensure the motor cavity is filled with clean, non-corrosive water before use. Periodically check that the insulation resistance remains above 0.5 megaohm during operation.
No, this pump is designed for clean water. Pumping sediment or muddy water from new wells is strictly prohibited as it can lead to premature wear and damage.
Immediately shut down the machine. Vibration often indicates the pump is running against the well wall or there is an internal fault that needs urgent maintenance.
It is recommended to dismantle and repair the pump every operational year, or every two years if the submersible time is less, replacing the impeller, shaft sleeve, and sealing rings.
The standard model is 380V/50Hz. However, submersible motors with other voltage specifications can be customized to meet your local power requirements.
English 
Afrikaans 
Albanian 
Amharic 
Arabic 
Armenian 
Azerbaijani 
Basque 
Belarusian 
Bengali 
Bosnian 
Bulgarian 
Catalan 
Cebuano 
Corsican 
Croatian 
Czech 
Danish 
Dutch 
Esperanto 
Estonian 
Finnish 
French 
Frisian 
Galician 
Georgian 
German 
Greek 
Gujarati 
Haitian Creole 
Hausa 
Hawaiian 
Hebrew 
Hindi 
Miao 
Hungarian 
Icelandic 
Igbo 
Indonesian 
Irish 
Italian 
Japanese 
Javanese 
Kannada 
Kazakh 
Khmer 
Rwandese 
Korean 
Kurdish 
Kyrgyz 
Lao 
Latin 
Latvian 
Lithuanian 
Luxembourgish 
Macedonian 
Malgashi 
Malay 
Malayalam 
Maltese 
Maori 
Marathi 
Mongolian 
Myanmar 
Nepali 
Norwegian 
Norwegian 
Occitan 
Pashto 
Persian 
Polish 
Portuguese 
Punjabi 
Romanian 
Russian 
Samoan 
Scottish Gaelic 
Serbian 
Sesotho 
Shona 
Sindhi 
Sinhala 
Slovak 
Slovenian 
Somali 
Spanish 
Sundanese 
Swahili 
Swedish 
Tagalog 
Tajik 
Tamil 
Tatar 
Telugu 
Thai 
Turkish 
Turkmen 
Ukrainian 
Urdu 
Uighur 
Uzbek 
Vietnamese 
Welsh 
Bantu 
Yiddish 
Yoruba 
Zulu