Sabbayn Ceel Biyo Hoosaysa

Bamka Buoyancy Nooca Bamka Hooseeya oo laga sameeyay bamka jiifka jiifa, aaladda buoy, qalabka wax lagu hagaajiyo, aaladda dhoofinta iyo isku dhafka kale, isticmaalka guud ee biyaha. Faa'iidooyinka: rakibadeedu waa mid fudud oo degdeg ah, si sahlan loo shubo, fududahay in la beddelo iyo dayactirka bamka. Ku habboon wabiyada, harooyinka biyaha barkadaha biyaha, mashaariicda degdegga ah ee injineernimada biyaha waxay u baahan yihiin inay si degdeg ah uga jawaabaan. Injineerinka madaniga ah waa la badbaadiyay, qiimaha guud waa hooseeyaa, ku-shaqayntuna waa xoog badan tahay.

Bamka buy wuxuu isku hagaajin karaa booskiisa iyadoo loo eegayo isbeddelka heerka biyaha, kaas oo had iyo jeer ku hayn kara bamka hoos u dhigaya isla booska biyaha hoostiisa.

We are pleased to introduce our product, a three-phase AC 380V power supply (tolerance ± 5%), 50HZ (tolerance ± 1%) submersible pump. The product requires water quality meets the following conditions: water temperature is not higher than 20 °C; solid impurities content (mass ratio) is not greater than 0.01%; PH value (pH) is 6.5-8.5; hydrogen sulfide content is not more than 1.5mg/L; chloride ion content is not greater than 400mg/L. The motor adopts a closed or water immersion wet structure. Before use, the inner cavity of the submersible motor needs to be filled with clean water to prevent mistakes. And the water injection and exhaust bolts need to be tightened, otherwise it can not be used. The submersible pump must be completely immersed in water to work, the immersion depth shall not exceed 70 meters, and the distance between the bottom of the submersible pump and the bottom of the well shall not be less than 3 meters. The well water flow should be able to meet the water output and continuous operation of the submersible pump, and the water output of the submersible pump shall be controlled at 0.7-1.2 times of the rated flow. The well must be vertical, and the submersible pump can not be used horizontally or inclined, but only vertically. The submersible pump must match the cable according to the requirements and be equipped with external overload protection device. The pump is strictly prohibited from no-load test without water. This product is suitable for a variety of demanding pump working environment, guaranteeing efficient and stable operation, which is your ideal choice.

Dhammaan moodooyinka waa la habeyn karaa, fadlan nala soo xiriir wixii faahfaahin ah.

1, bamka si fiican hoos ugu dhigi kara bamka biyaha nadiifka ah, wuxuu mamnuucayaa ceelka cusub, bamgareynta wasakhda iyo biyaha dhoobada ah,

2, heerka bamka biyaha ceelka korantada 380/50HZ, isticmaalka darajooyinka kale ee danab ee matoorada submersible waxay u baahan yihiin in la habeeyo. Xadhkaha dhulka hoostiisa mara waa in uu isticmaalo fiilada biyuhu, waa in lagu qalabeeyaa qalabka bilawga ah, sida sanduuqa qaybinta, bilawga oo aan diyaar ahayn waa in si caadi ah loo isticmaalo hawlaha ilaalinta guud, sida ilaalinta xad-dhaafka ah ee wareegga gaaban, ilaalinta wajiga, ilaalinta hoose, ilaalinta dhulka, ilaalinta caajiska , haddii ay dhacdo xaalado aan caadi ahayn, aaladda ilaalintu waa inay noqotaa safar hawleed waqtigeeda ku habboon.

3, rakibidda iyo isticmaalka bamka waa in ay ahaataa mid si kalsooni leh loo dejiyo, mamnuucday riixida iyo jiidista marka gacmaha iyo cagaha ay qoyan yihiin, waa in la gooyaa korontada ka hor inta aan la rakibin iyo dayactirka bamka, bamka isticmaalka goobta si loo dejiyo " si looga hortago shoog koronto" calamadaha muuqda:

4, hoos ceelka ama ka hor rakibidda, dalool motor waa in la buuxiyaa biyo diirran ama biyo karkaraya nadiif ah oo aan daxaloobayn, adkayn boolka / biyaha, bamka on ordi imtixaanka dhulka, waa in ay qolka bamka biyaha caag sifaynta. biraha, isla markiiba ku bilaabma wax ka badan ilbiriqsi, eeg in isteerinku la mid yahay tilmaamaha isteerinka. Marka bamku toosan yahay, fiiro gaar ah u yeelo badbaadada, ka ilaali dhaawaca rogrogmi kara.

5, si adag sida ku xusan qodobbada wiishka bamka, kala duwanaanshaha socodka isticmaalka, si looga hortago socodka hooseeya ama xoogga sare ee wiishka, xajinta iyo qaybaha kale ee xirashada, culeyska matoorka ayaa gubtay

6, ka dib markii bamka hoos ceelka, cabbiraadda motor in ay iska caabin dahaarka dhulka waa in aanay noqon wax ka yar 100M, ka dib markii bilowga si ay u dhawraan danab iyo hadda, hubi dahaarka dabaylaha motor, haddii si waafaqsan shuruudaha; heerkulka meesha lagu kaydiyo bamka haddii uu ka yar yahay barta qaboojinta, waa in lagu qallajiyaa biyaha godka matoorka, ka ilaali godka matoorka biyaha barafka ee uu keeno heerkulka hooseeya.

 Soo bandhigid kooban ee qaab dhismeedka: qaybta bamka waxay inta badan ka kooban tahay usheeda dhexe ee bamka, impeller, qolof leexinta, caag, jeegaga jidhka (qaybaha ikhtiyaariga ah) iyo qaybaha kale. Qaybta mooto waxay inta badan ka kooban tahay saldhigga, filimka xakamaynaya cadaadiska, riixitaanka, saxanka riixida. , Kursiga hagaha hoose ee hagaha, stator, rotor, kursiga hagaha sare ee hagaha, giraanta ciidda, qaybta gelitaanka biyaha, fiilada iyo qaybaha kale.

Tilmaamaha ugu muhiimsan ee alaabta waxaa ka mid ah:

1, Matoorku waa matoor saddex-waji ah oo aan caadi ahayn oo qoyan oo qoyan, godka matoorka waxaa ka buuxa biyo nadiif ah, oo loo isticmaalo in lagu qaboojiyo matoorka oo lagu subiyo xajinta, filimka xakamaynta cadaadiska ee hoose ee matoorka ayaa loo isticmaalaa in lagu hagaajiyo. kala duwanaanshaha cadaadiska balaadhinta iyo foosha ee biyaha gudaha jidhka oo ay sababtay isbeddelka heerkulka sare u kaca ee matoorka.

 2, Si aan ciidda ceelka biyaha ku jirta uga dhicin matoorka, qaybta sare ee shafka matoorka waxaa lagu rakibay laba shaabad oo saliid ah, waxaana lagu rakibay giraan ciid si loo sameeyo qaab-dhismeed ka hortagga ciidda.

 3, Si looga hortago in bamka bamka uu kor u kaco marka la bilaabayo, bamka bamka iyo matoorka ayaa ku xiran isku-xirnaanta, waxaana lagu dhejiyaa tuubada sare ee qaybta hoose ee matoorka.

 4, Saliidda matoorka iyo bamka xajinta waa saliidda biyaha.

 5, Dabaylaha stator motor ka samaysan yahay silig motor submersible tayo sare leh, oo leh waxqabadka dahaarka sare.

 6, Bamka waxaa loogu talagalay kombuyuutar CAD, oo leh qaab-dhismeed fudud iyo waxqabad farsamo oo wanaagsan.

(1) Diyaarinta ka hor inta aan la rakibin:
1. Hubi in bamka hoos mara uu buuxiyo shuruudaha isticmaalka iyo baaxadda lagu sheegay buug-gacmeedka.
2. Adigoo isticmaalaya dhexroor culus oo leh dhexroor la mid ah dhexroorka dibadda ee ugu sarreeya ee bamka hoos mara, cabbir haddii dhexroorka ceelka ceelka uu ku habboon yahay bamka hoos mara, cabbirna haddii qoto-dheeraanta ceelku buuxinayo shuruudaha rakibidda.
3. Hubi in ceelka ceelku uu nadiif yahay iyo in biyuhu ceelku yihiin kuwo gurracan. Weligaa ha isticmaalin bam koronto oo hoos iman kara si aad u dhaqdo bamka weriyaha dhoobada iyo biyaha ciidda si aad uga fogaato dhaawac degdeg ah oo soo gaadha bamka korontadu hoos u dhigto.
4. Hubi in booska xajinaha welhead ku habboon yahay iyo haddii ay u adkeysan karto tayada unugga oo dhan
5. Hubi in qaybaha matoorka hoos u dhigi karaan ay dhammaystiran yihiin oo si sax ah loo rakibay si waafaqsan jaantuska kulanka ee buug-gacmeedka, ka saar shaashadda oo beddel isku-xidhka si aad u aragto inay si dabacsan u wareegayso.
6. Ka fur furka biyaha oo ka buuxi godka matoorka biyo nadiif ah oo aan daxalaysan (xusuusnow in aad buuxiso), ka bacdina adkee xadhigga biyaha. Ka dib 12 saacadood oo duritaanka biyaha ah, caabbinta dahaarka ee matoorku waa in aanu ka yarayn 150M Q marka lagu cabbiro miis gariir 500V ah.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

Jaantuska habka fiilooyinka fiilooyinka ee ku lifaaqan waa sida soo socota:

8. Isticmaal multimeter-ka si aad u hubiso in xadhkaha saddexda weji ay isku xidhan yihiin iyo in iska caabbinta DC-ku ay qiyaas ahaan dheelli tiran yihiin.
9. Hubi in awoodda wareegga iyo beddelka ay si xad dhaaf ah u raran yihiin, ka dibna ku xidh furaha ilaalinta culayska ama qalabka bilowga. Ka eeg Shaxda 2 noocyo gaar ah, ka dibna ku shub baaldi biyo ah bamka biyaha ee ka soo baxa bamka biyaha si aad u saliidayn xadhkaha caagga ah ee bamka, ka dibna bamka korontadu hoos u dhigto dhig mid toosan oo joogto ah. Bilow (wax aan ka badnayn hal ilbiriqsi) oo hubi in jihada isteerinka ay waafaqsan tahay calaamadda isteerinka. Haddaysan ahayn, ku beddel laba xidhiidhiye oo ka mid ah fiilada saddexda weji leh. Kaddib rakib shaandhada una diyaari inaad ceelka dhaadhacdo. Haddii loo isticmaalo waqtiyo gaar ah (sida godadka, godadka, webiyada, balliyada, balliyada, iwm.), bamka korontadu waa in si la isku halleyn karo loo dejiyo.

(2) Qalabka iyo qalabka lagu rakibo:
1. Hal ka mid ah silsiladaha wax-qaadista ee ka badan laba tan.
2. Sadex geesood ah oo leh joog toosan oo aan ka yarayn afar mitir.
3. Laba xadhig oo ka laadlaad ah oo qaadi kara miisaan ka badan hal tan (waxay qaadi karaan culayska bambooyin biyo ah oo dhammaystiran).
4. Ku rakib laba-labo oo xajin ah (kabyo).
5. Biraha, dubbaha, kaashawiito, qalabka korontada iyo qalabka, iwm.

(3) Ku rakibida bamka korontada
1. Jaantuska rakibaadda ee bamka korontada hoostiisa ayaa lagu muujiyay Jaantuska 2. Cabbirrada rakibidda gaarka ah ayaa lagu muujiyay shaxda 3 "Liiska Cabbirrada Rakibaadda ee Bamka Korontada ee Submersible".

2. Bambooyin koronto oo hoos yimaada oo madax ka yar 30 mitir ayaa si toos ah loogu shubi karaa ceelka iyadoo la isticmaalayo tubooyinka iyo xargaha ama xargaha kale ee hemp kuwaas oo qaadi kara miisaanka buuxa ee dhammaan mishiinka, tuubooyinka biyaha, iyo biyaha tuubooyinka.

3. Bambooyin leh madax ka badan 30 mitir ayaa isticmaala tubooyinka birta, nidaamka rakibiddana waa sida soo socota.
①Isticmaal xajin si aad ugu xidho cidhifka sare ee qaybta matoorka biyaha (matoorka iyo bamka biyaha ayaa ku xidhan wakhtigan), ku qaad silsilad ka laadlaadsan, oo si tartiib ah ugu xidh ceelka ilaa aad xajinayso madaxa ceelka oo ka saar silsilad laadlaadsan.
②Isticmaal labo xabbo oo kale si aad ugu xidho tuubada, ku qaad silsilad ka laadlaad ah oo 15 cm ka fog garabka, oo si tartiib ah hoos ugu dhig. Inta u dhaxaysa flange tuubada iyo bamka bamka, dhig suufka caagga ah meesha oo adkee tuubada oo si siman ugu bamgareyso boolal, lawska iyo weelasha guga.
③ Waxoogaa kor u qaad bamka hoos mara, ka saar xajinta cidhifka sare ee bamka biyaha, fiilada si adag ugu xidh tuubada biyaha cajalad caag ah, oo si tartiib ah hoos ugu xidh ilaa xajinta la dhigo madaxa ceelka.
④ Isticmaal isku qaab si aad ugu xidhid dhammaan tuubooyinka biyaha ceelka.
⑤Kadib markii fiilada macdanta "lead-out" lagu xiro furaha kantaroolka, waxay ku xiran tahay sahayda korontada ee saddexda weji.

(4) Waxyaabaha la xuso marka la rakibayo:
1. Haddi dhacdo isku buuqid ah la helo inta lagu jiro habka bamgareynta, leexi ama jiid tuubada biyaha si aad uga gudubto meesha saxmada leh. Haddii tillaabooyin kala duwani aanay weli shaqayn, fadlan ha ku qasbin bamka si aad uga fogaato burbur ku yimaadda bamka korontada ee hoos u dhigi kara iyo ceelka.
2. Inta lagu jiro rakibidda, suufka caagga ah waa in lagu dhejiyaa gees ka gees kasta oo tuubo ah oo la adkeeyo si siman.
3. Marka bamka biyaha lagu shubo ceelka waa in la dhex dhigaa dhuunta ceelka badhtankeeda si aanay bamku ugu socon darbiga ceelka muddo dheer, taasina ay keento in bamku gariiro oo matoorku xaaqo oo gubato. .
4. Go'aami qoto dheeraanta bamka biyaha ilaa gunta ceelka iyadoo loo eegayo ciidda qulqulaya iyo xaaladaha ciidda ee ceelka. Ha ku aasin bamka dhoobada. Masaafada u jirta bamka biyaha ilaa gunta ceelka guud ahaan waa mid aan ka yarayn 3 mitir (eeg sawirka 2).
5. Moolka gelitaanka biyaha ee bamka biyuhu waa in aanu ka yarayn 1-1.5 mitir heerka biyaha firfircoon ilaa marinka biyaha gelitaanka (eeg sawirka 2). Haddii kale, xadhkaha matoorka biyaha ayaa si fudud u dhaawacmi kara.
6. Wiishka bamka biyuhu ma noqon karo mid aad u hooseeya. Haddii kale, waxaa loo baahan yahay in lagu rakibo tuubada biyaha ee albaabka ceelka si loo xakameeyo socodka bamka ee barta socodka lagu qiimeeyay si looga hortago in matoorku uu si xad dhaaf ah u raro oo uu u gubto heerka socodka badan ee socodka awgeed.
7. Marka bamka biyuhu socdo, wax-soo-saarka biyuhu waa inuu ahaado mid joogto ah oo xitaa, hadda waa inuu ahaado mid deggan (marka la qiimeeyo xaaladaha shaqada, guud ahaan wax aan ka badnayn 10% ee hadda la qiimeeyay), waana inaysan jirin gariir ama buuq. Haddii ay jiraan wax aan caadi ahayn, mashiinka waa in la joojiyaa si loo ogaado sababta oo loo tirtiro.
8. Markaad rakibayso, fiiro gaar ah u yeelo goobta siliga goynta matoorka (eeg sawirka 2). Marka dhuumaha biyuhu ay yihiin tuubo bir ah, ka soo hoggaami xajinta madaxa ceelka; marka tuubada biyuhu ay tahay tuubo caag ah, ka soo jiid calaamadda dhulka ee bamka korontada.

• 1 rakibidda bamka submersible waa la dhammeeyaa, dib u hubi caabbinta dahaarka iyo socodka saddexda weji ee furaha, hubi qalabka oo bilow qaladka isku xirka qalabka, haddii aysan wax dhibaato ah jirin, waxay bilaabi kartaa tijaabada tijaabada, ka dib bilawga qalabka. Muujinaya akhrinta haddii wax ka badan taarikada magaca ku qoran ee danab lagu qiimeeyay iyo hadda, u fiirso buuqa bamka iyo ifafaale gariirka, wax walba waa caadi waa la hawl gelin karaa.
• 2 hawlgalka bamka afarta saacadood ee ugu horreeya, waa in si dhakhso ah loo xidho tijaabinta caabbinta kuleylka kuleylka ee mashiinka, qiimuhu waa inuusan ka yarayn 0.5 megaohm.
• 3 xidhitaanka bamka, waa in ay ahaataa mid u dhaxaysa shan daqiiqo ka dib bilowga, ka hortag in tiirka biyaha ee tuubada aanu si buuxda dib u soo noqon oo sababto in hadda matoorku aad u weyn yahay oo gubanayo.
• 4 ku shub shaqada caadiga ah, si ay u dheeraato nolosheeda adeegga, si loo hubiyo korantada sahayda, shaqada hadda jirta iyo caabbinta dahaarka waa caadi, haddii la helo xaaladdan soo socota, waa in isla markiiba la joojiyo cilad-bixinta.
•  
• - xaaladda la qiimeeyay, hadda waa in ka badan 20%.
• - heerka biyaha firfircoon ilaa qaybta soo galitaanka biyaha, taasoo keenaysa biyo kala go'a.
• - bamka hoos mara gariirka ama buuqa daran.
• - danab sahayda ayaa ka hooseeya 340 volts.
• - fiyuuska ayaa gubtay weji.
• - Burburka tuubooyinka biyaha.
• Matoorka caabbinta kuleylka kuleylka ayaa ka yar 0.5 megaohm.
•  
• 5 Alaabtani waxay leedahay sifooyin kala diris fudud, waxaa lagu kala diri karaa tallaabooyin fudud.
• Talaabooyinka kala furfurida waxaa ka mid ah: 1 fur xadhiga fiilada, ka saar qaybaha dhuumaha iyo saxanka ilaalinta xadhkaha. 2 marooji furka dareeraha biyaha oo soo daa dhammaan biyaha ku jira qolka matoorka. 3 ka saar filtarka oo dabc fur furka hagaajinta ee ku dhejisan usheeda dhexe ee mootada. 4 hoos u xidh birta isku xidha qaybta biyaha soo gelisa iyo mishiinka, oo kala saar bamka iyo mishiinka (fiiri si aad unugu jiifto si aad uga hortagto qalooca usheeda dhexe marka la kala saarayo). 5 isku xigxiga kala dirida bamka waa: (fiiri sawirka 1) qayb biyaha soo gelisa, impeller, shunt shell, impeller, jeeg valve body.
• Markaad ka saarayso impeller-ka, isticmaal qalab gaar ah si aad u dabciso gacan-tooska ah ee hagaajinaysa impeller. Inta lagu jiro habka kala dirida, ka fogow inaad leexiso usheeda dhexe oo waxyeello u geysato qaybaha kala duwan.
• 6 habka loo kala furfuro matoorku waa: (fiiri sawirka 1) matoorka saar masraxa, ka dibna ka saar lowska boolal (ulaha usha jiid), salka, usheeda dhexe quful lowska, saxan riixo, furaha, tareenka hoose hagaha, in yar oo dhaawacan) oo ugu dambeyntii ka saar qaybta isku xirka iyo kursiga tareenka ee sare ee hagaha.
• 7 cutub: ka hor inta aan la isku keenin, miridhka iyo wasakhda qayb kasta waa in la nadiifiyaa, oo daboolka waa in lagu dhejiyaa dusha sare iyo dhejiye kasta, ka dibna golaha waa in loo sameeyaa habka kala-duwanaanta (dhaqdhaqaaqa matoorka). shafka ka dib marka la isku yimaado waa qiyaastii hal milimitir), ka dib marka la dhammeeyo shirka, isku xidhka waa in uu si dabacsan u rogaa, ka dibna shaandhada la geliyo si loo tijaabiyo.6. Bambooyin hoos yimaada waa in laga soo saaraa ceelka si loo burburiyo loona dayactiro sida ku cad qodobka 5 sanadka shaqada ka dib, ama wax ka yar hal sano oo shaqeynaya laakiin laba sano oo quusin ah, qaybaha duugoobayna waa in la beddelaa.

 1, dami biyaha godka matoorka (gaar ahaan xilliga jiilaalka si aad uga hortagto matoorku baraf), oo si fiican u xidh fiilada.

 2, store in an indoor room without corrosive substances and gases, with a temperature below 40 °C.

 3, isticmaalka muddada dheer waa in fiiro gaar ah u leh ka hortagga miridhku ee matoorada submersible.

01 Qaadashada biyaha ceelka qoto dheer

02 Biyo-helid-sare

03 biyaha buuraha 

04 munaaradaha biyaha

05 waraabka beeraha

06 waraabka beerta

07 qaadashada biyaha webiga

08 biyaha guriga