Water Filled Submersible Pump

Nidaamka korantada ee taxanaha QS waa nooc cusub oo waraabka iyo mishiinada biyaha qaada. Taxanaha bambooyinku waa toosan, iyadoo la adeegsanayo shucaaca togan iyo taban ee naqshadaynta hagaha, mugga yar, miisaanka fudud, wiishka sare, rakibida fudud iyo dhaqdhaqaaqa, dayactirka fudud iyo hawlgalka.

 Qiyaasta socodka 5-50m3/h, wiish 5-800m.

Alaabtu waxay ku qalabaysan tahay saddex-waji AC 380V (dulqaadku waa ± 5%), 50 Hz (dulqaadku waa ± 1%) koronto. Shuruudaha tayada biyuhu waa:

(1) heerkulka biyuhu waa inuusan ka badnaan 20 °C;

(2) Maaddada wasakhda adag (samiga baaxadda) waa inuusan ka badnaan 0.01%;

(3) Qiimaha PH (pH) waa 6.5-8.5;

(4) Mawduuca hydrogen sulfide waa inuusan ka badnaan 1.5 mg / L;

(5) Waxyaabaha ku jira chloride ion waa inuusan ka badnaan 400 mg / L. Matoorku waa qaab-dhismeed qoyan oo xiran ama biyo ka buuxaan.

Kahor intaan la isticmaalin, godka gudaha ee matoorka hoos u dhigi kara waa in lagu buuxiyaa biyo nadiif ah, iyo duritaanka biyaha iyo boolalka hawada qiiqa waa in la adkeeyaa, haddii kale waa inaan la isticmaalin. Bamka hoos yimaada waa in gabi ahaanba la geliyo biyaha si uu u shaqeeyo, qoto dheer ee galinta waa in aanu ka badnayn 70 mitir, masaafada u dhaxaysa gunta hoose ee bamka hoos yimaada iyo gunta ceelka waa in aanu ka yarayn 3 mitir. Qulqulka biyaha ceelku waa inuu buuxiyaa qaadashada biyaha iyo shuruudaha hawlgalka joogtada ah ee bamka hoos yimaada, iyo wax soo saarka biyaha ee bamka hoos yimaada waa in lagu xakameeyaa 0.7-1.2 jeer socodka la qiimeeyay. Ceelku waa inuu ahaadaa mid toosan, bamka hoos mara looma isticmaali karo si toosan ama u janjeero, balse looma isticmaali karo si toosan. Bamka hoos yimaada waa in lagu dhejiyaa fiilooyinka oo lagu rakibaa qalabka ilaalinta xad-dhaafka ah ee dibadda sida loo baahdo. Bamka hoos yimaada ayaa si adag uga mamnuuc ah in la tijaabiyo iyada oo aan culeys biyo la saarin.

1, bamka si fiican hoos ugu dhigi kara bamka biyaha nadiifka ah, mamnuucaya in la dhaqo ceel cusub, bamgareynta wasakhda iyo biyaha dhoobada ah,

2, heerka bamka biyaha ceelka korantada 380/50HZ, isticmaalka darajooyinka kale ee danab ee matoorada submersible waxay u baahan yihiin in la habeeyo. Xadhkaha hoos-u-dhaca waa in ay adeegsadaan fiilada aan biyuhu lahayn, waa in lagu qalabeeyaa qalabka bilowga, sida sanduuqa qaybinta, bilawga oo aan diyaar ahayn waa in uu leeyahay hawl ilaalin dhammaystiran oo matoorka ah, sida ilaalinta xad-dhaafka wareegga gaaban, ilaalinta wajiga, ilaalinta hoos-u-dhaca, ilaalinta dhulka, ilaalinta caajisnimada, in Xaaladda xaalado aan caadi ahayn, aaladda ilaalintu waa inay noqotaa safar hawleed waqtigeeda ku habboon.

3, bamka waa in uu ahaadaa mid si la isku halleyn karo ugu qotoma habka rakibidda iyo isticmaalka. Mamnuuc gacmaha iyo lugaha qoyan ee riix-jiidista. Kahor inta aan la rakibin oo la dayactirin bamka, korontada waa in la gooyaa. Lagu rakibay meesha bamka lagu isticmaalo, waa in si cad loo calaamadiyaa "ka hortagga shoogga korontada". Kahor intaadan ceelka hoos u dhigin, godka matoorka waa in lagu buuxiyaa biyo nadiif ah ama biyo qabow oo nadiif ah oo aan qudhun, oo lagu xidhaa biraha biyaha / qulqulka.

4, marka hawlgalka waraysiga maxaliga ah ee bamka, biyaha waa in lagu shubaa qolka bamka si loo saliideeyo caag-dhaliyaha. Waqtiga bilawga degdega ah waa inuusan dhaafin hal ilbiriqsi, hubi in jihadu la mid tahay tilmaanta isteerinka. Marka bamku toosan yahay, fiiro gaar ah u yeelo badbaadada, ka ilaali gadoominta iyo dhaawaca.

5, si adag sida waafaqsan qodobada wiish bamka, kala duwan ee isticmaalka, si looga hortago socodka hooseeyo ama wiish xoog bamka wiishka sare, dabada ka riixaya iyo qaybaha kale ee xirashada, xad-dhaaf ah motor gubtay 6, ka dib bamka hoos ceelka, cabbiraadda matoorka ilaa caabbinta dahaarka dhulka waa inuusan ka yarayn 100M, ka dib bilawga si loo ilaaliyo tamarta iyo hadda, hubi dahaarka dabaysha mootada, haddii ay waafaqsan tahay shuruudaha; heerkulka meesha lagu kaydiyo bamka haddii uu ka yar yahay barta qaboojinta, waa in uu ahaado mid engegan biyaha godka matoorka, ka ilaali godka matoorka biyaha barafka ee uu keeno heerkulka hooseeya.

The pump part is mainly composed of pump shaft, impeller, guide housing, rubber bearing, check valve body (optional) and other components. The motor part mainly includes base, pressure regulating diaphragm, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand discharging ring, water inlet section, lead cable and other components. The main characteristics of this product are that the motor is a water-immersed three-phase asynchronous motor, and the motor cavity is filled with water to cool the motor and lubricate the bearing. The pressure regulating film at the bottom is used to adjust the pressure difference of the water body in the cavity caused by the temperature rise of the motor. In order to prevent the sand from entering the motor, the upper end of the motor shaft extension is equipped with two oil seals and installed a sand discharging ring, forming a sand prevention structure. At the same time, in order to prevent the pump shaft from jumping when starting, the pump shaft is connected with the motor shaft by a coupling, and the thrust bearing is installed under the motor. The lubrication of the whole product is water lubrication, and the motor stator winding is made of high quality submersible motor winding wire with high insulation performance. In addition, the pump is designed by computer CAD, with simple structure and excellent technical performance.

(1) Diyaarinta ka hor inta aan la rakibin:
1. Hubi in bamka hoos mara uu buuxiyo shuruudaha isticmaalka iyo baaxadda lagu sheegay buug-gacmeedka.
2. Adigoo isticmaalaya dhexroor culus oo leh dhexroor la mid ah dhexroorka dibadda ee ugu sarreeya ee bamka hoos mara, cabbir haddii dhexroorka ceelka ceelka uu ku habboon yahay bamka hoos mara, cabbirna haddii qoto-dheeraanta ceelku buuxinayo shuruudaha rakibidda.
3. Hubi in ceelka ceelku uu nadiif yahay iyo in biyuhu ceelku yihiin kuwo gurracan. Weligaa ha isticmaalin bam koronto oo hoos iman kara si aad u dhaqdo bamka weriyaha dhoobada iyo biyaha ciidda si aad uga fogaato dhaawac degdeg ah oo soo gaadha bamka korontadu hoos u dhigto.
4. Hubi in booska xajinaha welhead ku habboon yahay iyo haddii ay u adkeysan karto tayada unugga oo dhan
5. Hubi in qaybaha matoorka hoos u dhigi karaan ay dhammaystiran yihiin oo si sax ah loo rakibay si waafaqsan jaantuska kulanka ee buug-gacmeedka, ka saar shaashadda oo beddel isku-xidhka si aad u aragto inay si dabacsan u wareegayso.
6. Ka fur furka biyaha oo ka buuxi godka matoorka biyo nadiif ah oo aan daxalaysan (xusuusnow in aad buuxiso), ka bacdina adkee xadhigga biyaha. Ka dib 12 saacadood oo duritaanka biyaha ah, caabbinta dahaarka ee matoorku waa in aanu ka yarayn 150M Q marka lagu cabbiro miis gariir 500V ah.
7. Isku-xidhka fiilada, ka jar caag 120mm ah oo ka mid ah daraf ka mid ah fiilada baxaysa iyo fiilada ku habboon ee leh mindi koronto-yaqaanka ka dibna ku rogrogmadaa dhererka saddexda fiilooyinka xudunta ah ee qaab go'an, ka saar xudunta 20mm naxaas ah, xoqin oksaydhka lakabka dibadda ee fiilada naxaasta leh mindi ama maro ciid, oo geli labada silig ee isku xidhan ee ku dhammaanaya palirs. Ka dib markaad lakabka si adag ugu xidho silig naxaas ah, si fiican oo adag u iibi, iyo ciid kasta. oogada dushiisa. Dabadeed, saddexda qaybood ee kala-goysyada, isticmaal cajaladda daboolka polyvester-ka si aad ugu duubto qaab nus ah oo isku xiran oo ah saddex berkedood. Ku duub labada daraf ee lakabka wax lagu duubo si adag adigoo isticmaalaya dunta nyion, ka dibna isticmaal qaab nus ah oo la tumay si aad ugu duubto cajaladda saddex lakab. Ku duub daboolka dibadda cajaladda daboolka cadaadiska sare ee saddex lakab. Ugu dambeyntii, isku laab saddexda xargo oo si isdaba joog ah ugu duub shan lakab oo leh cajalad cadaadis sare leh. Lakab kasta waa in si adag loo xidhaa, kala-goysyada is-dhexyaaca waa inay ahaadaan kuwo adag oo fim ah si ay uga hortagaan in biyuhu soo galaan oo waxyeello u geystaan ​​dahaarka. , kaas oo aan ka yarayn 100M Ω

Jaantuska habka fiilooyinka fiilooyinka ee ku lifaaqan waa sida soo socota:

8. Isticmaal multimeter-ka si aad u hubiso in xadhkaha saddexda weji ay isku xidhan yihiin iyo in iska caabbinta DC-ku ay qiyaas ahaan dheelli tiran yihiin.
9. Hubi in awoodda wareegga iyo beddelka ay si xad dhaaf ah u raran yihiin, ka dibna ku xidh furaha ilaalinta culayska ama qalabka bilowga. Ka eeg Shaxda 2 noocyo gaar ah, ka dibna ku shub baaldi biyo ah bamka biyaha ee ka soo baxa bamka biyaha si aad u saliidayn xadhkaha caagga ah ee bamka, ka dibna bamka korontadu hoos u dhigto dhig mid toosan oo joogto ah. Bilow (wax aan ka badnayn hal ilbiriqsi) oo hubi in jihada isteerinka ay waafaqsan tahay calaamadda isteerinka. Haddaysan ahayn, ku beddel laba xidhiidhiye oo ka mid ah fiilada saddexda weji leh. Kaddib rakib shaandhada una diyaari inaad ceelka dhaadhacdo. Haddii loo isticmaalo waqtiyo gaar ah (sida godadka, godadka, webiyada, balliyada, balliyada, iwm.), bamka korontadu waa in si la isku halleyn karo loo dejiyo.

(2) Qalabka iyo qalabka lagu rakibo:
1. Hal ka mid ah silsiladaha wax-qaadista ee ka badan laba tan.
2. Sadex geesood ah oo leh joog toosan oo aan ka yarayn afar mitir.
3. Laba xadhig oo ka laadlaad ah oo qaadi kara miisaan ka badan hal tan (waxay qaadi karaan culayska bambooyin biyo ah oo dhammaystiran).
4. Ku rakib laba-labo oo xajin ah (kabyo).
5. Biraha, dubbaha, kaashawiito, qalabka korontada iyo qalabka, iwm.

(3) Ku rakibida bamka korontada
1. Jaantuska rakibaadda ee bamka korontada hoostiisa ayaa lagu muujiyay Jaantuska 2. Cabbirrada rakibidda gaarka ah ayaa lagu muujiyay shaxda 3 "Liiska Cabbirrada Rakibaadda ee Bamka Korontada ee Submersible".

2. Bambooyin koronto oo hoos yimaada oo madax ka yar 30 mitir ayaa si toos ah loogu shubi karaa ceelka iyadoo la isticmaalayo tubooyinka iyo xargaha ama xargaha kale ee hemp kuwaas oo qaadi kara miisaanka buuxa ee dhammaan mishiinka, tuubooyinka biyaha, iyo biyaha tuubooyinka.

3. Bambooyin leh madax ka badan 30 mitir ayaa isticmaala tubooyinka birta, nidaamka rakibiddana waa sida soo socota.
①Isticmaal xajin si aad ugu xidho cidhifka sare ee qaybta matoorka biyaha (matoorka iyo bamka biyaha ayaa ku xidhan wakhtigan), ku qaad silsilad ka laadlaadsan, oo si tartiib ah ugu xidh ceelka ilaa aad xajinayso madaxa ceelka oo ka saar silsilad laadlaadsan.
② Isticmaal labo xajin oo kale si aad tuubada ugu xajiso, ku qaad silsilad laadlaad ah oo 15 cm ka fog garabka, oo si tartiib ah hoos ugu dhig. Inta u dhaxaysa flange tuubada iyo bamka bamka, dhig suufka caagga ah meesha oo adkee tuubada oo si siman ugu bamgareyso boolal, lawska iyo weelasha guga.
③ Xoogaa kor u qaad bamka hoos mara, ka saar xajinta cidhifka sare ee bamka biyaha, si adag ugu xidh fiilada tuubada biyaha cajalad balaastik ah, oo si tartiib ah hoos ugu xidh ilaa xajinta la dhigo madaxa ceelka.
④ Isticmaal isku qaab si aad ugu xidhid dhammaan tuubooyinka biyaha ceelka.
⑤Kadib markii fiilada macdanta "lead-out" lagu xiro furaha kantaroolka, waxay ku xiran tahay sahayda korontada ee saddexda weji.

(4) Waxyaabaha la xuso marka la rakibayo:
1. Haddi dhacdo isku buuqid ah la helo inta lagu jiro habka bamgareynta, leexi ama jiid tuubada biyaha si aad uga gudubto meesha saxmada leh. Haddii tillaabooyin kala duwani aanay weli shaqayn, fadlan ha ku qasbin bamka si aad uga fogaato burbur ku yimaadda bamka korontada ee hoos u dhigi kara iyo ceelka.
2. Inta lagu jiro rakibidda, suufka caagga ah waa in lagu dhejiyaa gees ka gees kasta oo tuubo ah oo la adkeeyo si siman.
3. Marka bamka biyaha lagu shubo ceelka waa in la dhex dhigaa dhuunta ceelka badhtankeeda si aanay bamku ugu socon darbiga ceelka muddo dheer, taasina ay keento in bamku gariiro oo matoorku xaaqo oo gubato. .
4. Go'aami qoto dheeraanta bamka biyaha ilaa gunta ceelka iyadoo loo eegayo ciidda qulqulaya iyo xaaladaha ciidda ee ceelka. Ha ku aasin bamka dhoobada. Masaafada u jirta bamka biyaha ilaa gunta ceelka guud ahaan waa mid aan ka yarayn 3 mitir (eeg sawirka 2).
5. Moolka gelitaanka biyaha ee bamka biyuhu waa in aanu ka yarayn 1-1.5 mitir heerka biyaha firfircoon ilaa marinka biyaha gelitaanka (eeg sawirka 2). Haddii kale, xadhkaha matoorka biyaha ayaa si fudud u dhaawacmi kara.
6. Wiishka bamka biyuhu ma noqon karo mid aad u hooseeya. Haddii kale, waxaa loo baahan yahay in lagu rakibo tuubada biyaha ee albaabka ceelka si loo xakameeyo socodka bamka ee barta socodka lagu qiimeeyay si looga hortago in matoorku uu si xad dhaaf ah u raro oo uu u gubto heerka socodka badan ee socodka awgeed.
7. Marka bamka biyuhu socdo, wax-soo-saarka biyuhu waa inuu ahaado mid joogto ah oo xitaa, hadda waa inuu ahaado mid deggan (marka la qiimeeyo xaaladaha shaqada, guud ahaan wax aan ka badnayn 10% ee hadda la qiimeeyay), waana inaysan jirin gariir ama buuq. Haddii ay jiraan wax aan caadi ahayn, mashiinka waa in la joojiyaa si loo ogaado sababta oo loo tirtiro.
8. Markaad rakibayso, fiiro gaar ah u yeelo goobta siliga goynta matoorka (eeg sawirka 2). Marka dhuumaha biyuhu ay yihiin tuubo bir ah, ka soo hoggaami xajinta madaxa ceelka; marka tuubada biyuhu ay tahay tuubo caag ah, ka soo jiid calaamadda dhulka ee bamka korontada.

The use of underwater pumps need to be carried out in strict accordance with the following steps: First of all, after the installation of the underwater pump, it is necessary to recheck the insulation resistance and the three-phase continuity of the switch, and check whether there are errors in the connection of the instrument and the start equipment. If there is no problem, you can start to test the machine. After the start, observe whether the indication readings of each instrument are correct. If the rated voltage and current specified on the nameplate are exceeded, please observe whether the pump has any noise or vibration. If everything is normal, it can be put into operation. The second step, after the pump runs for four hours for the first time, it should be closed and the thermal insulation resistance of the motor should be tested quickly. Its value should not be less than 0.5 megaohm. The third step, after the pump stops, it should be restarted after five minutes to prevent the water column in the pipeline from completely reversing, resulting in the motor burning due to excessive current. The fourth step, after the pump is put into normal operation, in order to prolong its service life, it is necessary to check the power supply voltage, operating current and insulation resistance regularly to see if they are normal. If the following conditions are found, the machine should be shut down immediately to troubleshoot:

1 the current exceeds 20% under the rated working conditions.

2 the dynamic water level drops to the inlet section, causing intermittent drainage.

3 the underwater pump vibrates violently or makes a lot of noise.

4 the supply voltage is lower than 340 volts.

5 a fuse burned. 6 water pipe damage.

7 the motor to the ground thermal insulation resistance is less than 0.5 megaohms.

The fifth step, the removal of the unit:

1 untie the cable tether, remove the pipe part, and remove the line protection plate.

2 screw down the water bolt and discharge all the water in the motor chamber.

3 remove the filter and loosen the fixing screw on the coupling fixed motor shaft.

4 screw down the bolt connecting the water inlet section and the motor, separate the pump and the motor (pay attention to make the unit level to prevent the bending of the pump shaft when separating)

5 the removal sequence of the pump is: (see Figure 1) water inlet section, impeller, shunt shell, impeller, check valve body. When removing the impeller, use special tools to loosen the cone sleeve fixed the impeller. In the process of removal, avoid bending the pump shaft and damage the various parts.

6 the removal process of the motor is: (see Figure 1) put the motor on the platform, and in order from the bottom of the motor bolt nuts, base, shaft head lock nut, thrust plate, key and lower guide bearing seat (iron rod bolt) on the connecting parts, and then take out the stator (careful not to damage the wire packet), and finally remove the connecting part and the upper guide bearing seat. Unit assembly: before assembly, rust and dirt on each component should be cleaned and sealant should be applied to each mating surface and fastener, and then the assembly should be carried out in reverse order of disassembly (the motor shaft moves about 1 mm after assembly), the coupling should be flexible after assembly, and then the filter should be put on for testing. Step six, after each use of the underwater electric pump operation for one year, or less than one year but immersed for two years, the disassembly and inspection should be carried out in accordance with the provisions of Article 5 to replace the worn parts.

 1, dami biyaha godka matoorka (gaar ahaan xilliga jiilaalka si aad uga hortagto matoorku baraf), oo si fiican u xidh fiilada.

 2, ku kaydi qol gudaha ah oo aan lahayn walxo daxalaystay iyo gaas, kulaylkiisuna ka hooseeyo 40 °C.

 3, isticmaalka muddada dheer waa in fiiro gaar ah u leh ka hortagga miridhku ee matoorada submersible.

01 Qaadashada biyaha ceelka qoto dheer

02 Biyo-helid-sare

03 biyaha buuraha

04 munaaradaha biyaha

05 waraabka beeraha

06 waraabka beerta

07 qaadashada biyaha webiga

08 biyaha guriga