250QJR Bamka Hoosta Hoose

The hot water pump adopts 50W400 grade high quality cold rolled silicon steel, stamped by high speed punch, with the advantages of low stator iron loss and low self-heating. The motor winding is specially designed for high temperature and anti-aging hot water motor. The winding is waterproof, and the high quality accessories such as 3CR13 stainless steel impeller shaft and high temperature durable bushing make it able to operate at high temperature for a long time, and can be used with frequency converter, which can be automatically adjusted according to the water consumption.

1, Korontada: saddex-waji AC 380V (dulqaad +/- 5%), 50HZ (dulqaad +/- 1%).

2, tayada biyaha:

(1) heerkulka biyuhu kama sarreyn 20 °C;

(2) Waxyaabaha wasakhda adag ku jira (samiga baaxadda) kama badna 0.01%;

(3) Qiimaha PH (pH) 6.5-8.5;

(4) Waxa ku jira hydrogen sulfide kama badna 1.5mg/L;

(5) Waxa ku jira chloride ion kama badna 400mg/L.

3, matoorku waa xiran yahay ama qaab-dhismeedka qoyan ee biyaha ka buuxsamay, ka hor inta aan la isticmaalin godka matoorka submersible waa in ay ka buuxaan biyo nadiif ah, si looga hortago been buuxda, ka dibna adkeeyo duritaanka biyaha, boolal sii daayo hawada, haddii kale loo ogol yahay in la isticmaalo.

4, bamka hoos u dhiga biyaha waa in gabi ahaanba la geliyo biyaha, qoto dheer oo quusin ah oo aan ka badnayn 70m, gunta hoose ee matoorka hoostiisa oo aan ka yarayn 3m.

5, socodka biyaha ceelasha waa in ay awoodaan in ay la kulmaan wax soo saarka biyaha bamka hoostiisa iyo hawlgalka joogtada ah, wax soo saarka biyaha bamka hoostiisa waa in lagu xakameeyaa 0.7 - 1.2 jeer socodka la qiimeeyay.

6, Ceelku waa inuu toosan yahay, bamka submersible lama isticmaali karo ama laguma daadin karo, kaliya isticmaal toosan.

7, bamka submersible waa in lagu dhejiyaa fiilada si waafaqsan shuruudaha, iyo qalabka ilaalinta xad-dhaafka ah ee dibadda.

8, bamka si adag ayaa loo mamnuucay iyada oo aan jirin mishiinka tijaabada ah ee wax-load ah

 This well submersible pump is a clean water pump. It is strictly prohibited to dig new wells and extract sediment and turbid water. The voltage grade of the well pump is 380/50HZ. Other submersible motors with different voltage grades need to be customized. Underground cables must be waterproof and equipped with starting equipment, such as distribution boxes, etc. The starting equipment should have conventional comprehensive motor protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection. In abnormal cases, the protection device should be tripped in time. The pump must be reliably grounded when installed and used. It is prohibited to push and pull the switch when the hands and feet are wet. The power must be cut off before installation and maintenance of the pump. The place where the pump is used must be clearly marked with "anti-electric shock". Before going down the well or installation, the motor must be filled with distilled water or non-corrosive clean cold water. The intake/drain bolts must be tightened. When testing the pump on the ground, water must be added to the pump chamber to lubricate the rubber bearings. The instantaneous start should not exceed one second to check whether the direction is correct. This is also applicable to direction indication. When using the vertical electric pump, pay attention to safety to prevent overturning and injury. Strictly in accordance with the provisions of the pump lift and flow range of use, to prevent the pump in low lift has a large flow or high lift has a large pull, resulting in extreme wear of thrust bearings and other parts, so that the motor overload burned. After the pump into the well, the measurement of the insulation resistance between the motor and the ground shall not be less than 100MΩ. After the start, regular observation of voltage and current, and check whether the motor winding insulation meets the requirements of the provisions. If the pump storage location temperature is below freezing, the water in the motor cavity should be drained to prevent freezing in the motor cavity and damage the motor due to low temperature.

Hordhac kooban oo qaab dhismeed ah: qaybta bamka waxay inta badan ka kooban tahay shafka bamka, impeller, qolof leexinta, caag-jiidka, jeegaga jidhka (qaybaha ikhtiyaariga ah) iyo qaybo kale. Qaybta matoorka waxay inta badan ka kooban tahay saldhigga, filimka xakameynaya cadaadiska, riixitaanka, saxanka riixida, kursiga hagaha hoose, stator, rotor, kursiga hagaha sare, giraanta ciidda, qaybta gelinta biyaha, fiilada iyo qaybaha kale.

Tilmaamaha ugu muhiimsan ee alaabta waxaa ka mid ah:

 1, Matoorku waa matoor saddex-waji ah oo aan caadi ahayn oo qoyan oo qoyan, godka matoorka waxaa ka buuxa biyo nadiif ah, oo loo isticmaalo in lagu qaboojiyo matoorka oo lagu subiyo xajinta, filimka xakamaynta cadaadiska ee hoose ee matoorka ayaa loo isticmaalaa in lagu hagaajiyo. kala duwanaanshaha cadaadiska balaadhinta iyo foosha ee biyaha gudaha jidhka oo ay sababtay isbeddelka heerkulka sare u kaca ee matoorka.

 2, Si aan ciidda ceelka biyaha ku jirta uga dhicin matoorka, qaybta sare ee shafka matoorka waxaa lagu rakibay laba shaabad oo saliid ah, waxaana lagu rakibay giraan ciid si loo sameeyo qaab-dhismeed ka hortagga ciidda.

 3, Si looga hortago in bamka bamka uu kor u kaco marka la bilaabayo, bamka bamka iyo matoorka ayaa ku xiran isku-xirnaanta, waxaana lagu dhejiyaa tuubada sare ee qaybta hoose ee matoorka.

 4, Saliidda matoorka iyo bamka xajinta waa saliidda biyaha.

 5, Dabaylaha stator motor ka samaysan yahay silig motor submersible tayo sare leh, oo leh waxqabadka dahaarka sare.

 6, Bamka waxaa loogu talagalay kombuyuutar CAD, oo leh qaab-dhismeed fudud iyo waxqabad farsamo oo wanaagsan.

(1) Diyaarinta ka hor inta aan la rakibin:
1. Hubi in bamka hoos mara uu buuxiyo shuruudaha isticmaalka iyo baaxadda lagu sheegay buug-gacmeedka.
2. Adigoo isticmaalaya dhexroor culus oo leh dhexroor la mid ah dhexroorka dibadda ee ugu sarreeya ee bamka hoos mara, cabbir haddii dhexroorka ceelka ceelka uu ku habboon yahay bamka hoos mara, cabbirna haddii qoto-dheeraanta ceelku buuxinayo shuruudaha rakibidda.
3. Hubi in ceelka ceelku uu nadiif yahay iyo in biyuhu ceelku yihiin kuwo gurracan. Weligaa ha isticmaalin bam koronto oo hoos iman kara si aad u dhaqdo bamka weriyaha dhoobada iyo biyaha ciidda si aad uga fogaato dhaawac degdeg ah oo soo gaadha bamka korontadu hoos u dhigto.
4. Hubi in booska xajinaha welhead ku habboon yahay iyo haddii ay u adkeysan karto tayada unugga oo dhan
5. Hubi in qaybaha matoorka hoos u dhigi karaan ay dhammaystiran yihiin oo si sax ah loo rakibay si waafaqsan jaantuska kulanka ee buug-gacmeedka, ka saar shaashadda oo beddel isku-xidhka si aad u aragto inay si dabacsan u wareegayso.
6. Ka fur furka biyaha oo ka buuxi godka matoorka biyo nadiif ah oo aan daxalaysan (xusuusnow in aad buuxiso), ka bacdina adkee xadhigga biyaha. Ka dib 12 saacadood oo duritaanka biyaha ah, caabbinta dahaarka ee matoorku waa in aanu ka yarayn 150M Q marka lagu cabbiro miis gariir 500V ah.
7. Isku-xidhka fiilada, ka jar caag 120mm ah oo ka mid ah daraf ka mid ah fiilada baxaysa iyo fiilada ku habboon ee leh mindi koronto-yaqaanka ka dibna ku rogrogmadaa dhererka saddexda fiilooyinka xudunta ah ee qaab go'an, ka saar xudunta 20mm naxaas ah, xoqin oksaydhka lakabka dibadda ee fiilada naxaasta leh mindi ama maro ciid, oo geli labada silig ee isku xidhan ee ku dhammaanaya palirs. Ka dib markaad lakabka si adag ugu xidho silig naxaas ah, si fiican oo adag u iibi, iyo ciid kasta. oogada dushiisa. Dabadeed, saddexda qaybood ee kala-goysyada, isticmaal cajaladda daboolka polyvester-ka si aad ugu duubto qaab nus ah oo isku xiran oo ah saddex berkedood. Ku duub labada daraf ee lakabka wax lagu duubo si adag adigoo isticmaalaya dunta nyion, ka dibna isticmaal qaab nus ah oo la tumay si aad ugu duubto cajaladda saddex lakab. Ku duub daboolka dibadda cajaladda daboolka cadaadiska sare ee saddex lakab. Ugu dambeyntii, isku laab saddexda xargo oo si isdaba joog ah ugu duub shan lakab oo leh cajalad cadaadis sare leh. Lakab kasta waa in si adag loo xidhaa, kala-goysyada is-dhexyaaca waa inay ahaadaan kuwo adag oo fim ah si ay uga hortagaan in biyuhu soo galaan oo waxyeello u geystaan ​​dahaarka. , kaas oo aan ka yarayn 100M Ω

Jaantuska habka fiilooyinka fiilooyinka ee ku lifaaqan waa sida soo socota:

8. Isticmaal multimeter-ka si aad u hubiso in xadhkaha saddexda weji ay isku xidhan yihiin iyo in iska caabbinta DC-ku ay qiyaas ahaan dheelli tiran yihiin.
9. Hubi in awoodda wareegga iyo beddelka ay si xad dhaaf ah u raran yihiin, ka dibna ku xidh furaha ilaalinta culayska ama qalabka bilowga. Ka eeg Shaxda 2 noocyo gaar ah, ka dibna ku shub baaldi biyo ah bamka biyaha ee ka soo baxa bamka biyaha si aad u saliidayn xadhkaha caagga ah ee bamka, ka dibna bamka korontadu hoos u dhigto dhig mid toosan oo joogto ah. Bilow (wax aan ka badnayn hal ilbiriqsi) oo hubi in jihada isteerinka ay waafaqsan tahay calaamadda isteerinka. Haddaysan ahayn, ku beddel laba xidhiidhiye oo ka mid ah fiilada saddexda weji leh. Kaddib rakib shaandhada una diyaari inaad ceelka dhaadhacdo. Haddii loo isticmaalo waqtiyo gaar ah (sida godadka, godadka, webiyada, balliyada, balliyada, iwm.), bamka korontadu waa in si la isku halleyn karo loo dejiyo.

(2) Qalabka iyo qalabka lagu rakibo:
1. Hal ka mid ah silsiladaha wax-qaadista ee ka badan laba tan.
2. Sadex geesood ah oo leh joog toosan oo aan ka yarayn afar mitir.
3. Laba xadhig oo ka laadlaad ah oo qaadi kara miisaan ka badan hal tan (waxay qaadi karaan culayska bambooyin biyo ah oo dhammaystiran).
4. Ku rakib laba-labo oo xajin ah (kabyo).
5. Biraha, dubbaha, kaashawiito, qalabka korontada iyo qalabka, iwm.

(3) Ku rakibida bamka korontada
1. Jaantuska rakibaadda ee bamka korontada hoostiisa ayaa lagu muujiyay Jaantuska 2. Cabbirrada rakibidda gaarka ah ayaa lagu muujiyay shaxda 3 "Liiska Cabbirrada Rakibaadda ee Bamka Korontada ee Submersible".

2. Bambooyin koronto oo hoos yimaada oo madax ka yar 30 mitir ayaa si toos ah loogu shubi karaa ceelka iyadoo la isticmaalayo tubooyinka iyo xargaha ama xargaha kale ee hemp kuwaas oo qaadi kara miisaanka buuxa ee dhammaan mishiinka, tuubooyinka biyaha, iyo biyaha tuubooyinka.

3. Bambooyin leh madax ka badan 30 mitir ayaa isticmaala tubooyinka birta, nidaamka rakibiddana waa sida soo socota.
①Isticmaal xajin si aad ugu xidho cidhifka sare ee qaybta matoorka biyaha (matoorka iyo bamka biyaha ayaa ku xidhan wakhtigan), ku qaad silsilad ka laadlaadsan, oo si tartiib ah ugu xidh ceelka ilaa aad xajinayso madaxa ceelka oo ka saar silsilad laadlaadsan.
② Isticmaal labo xajin oo kale si aad tuubada ugu xajiso, ku qaad silsilad laadlaad ah oo 15 cm ka fog garabka, oo si tartiib ah hoos ugu dhig. Inta u dhaxaysa flange tuubada iyo bamka bamka, dhig suufka caagga ah meesha oo adkee tuubada oo si siman ugu bamgareyso boolal, lawska iyo weelasha guga.
③ Xoogaa kor u qaad bamka hoos mara, ka saar xajinta cidhifka sare ee bamka biyaha, si adag ugu xidh fiilada tuubada biyaha cajalad balaastik ah, oo si tartiib ah hoos ugu xidh ilaa xajinta la dhigo madaxa ceelka.
④ Isticmaal isku qaab si aad ugu xidhid dhammaan tuubooyinka biyaha ceelka.
⑤Kadib markii fiilada macdanta "lead-out" lagu xiro furaha kantaroolka, waxay ku xiran tahay sahayda korontada ee saddexda weji.

(4) Waxyaabaha la xuso marka la rakibayo:
1. Haddi dhacdo isku buuqid ah la helo inta lagu jiro habka bamgareynta, leexi ama jiid tuubada biyaha si aad uga gudubto meesha saxmada leh. Haddii tillaabooyin kala duwani aanay weli shaqayn, fadlan ha ku qasbin bamka si aad uga fogaato burbur ku yimaadda bamka korontada ee hoos u dhigi kara iyo ceelka.
2. Inta lagu jiro rakibidda, suufka caagga ah waa in lagu dhejiyaa gees ka gees kasta oo tuubo ah oo la adkeeyo si siman.
3. Marka bamka biyaha lagu shubo ceelka waa in la dhex dhigaa dhuunta ceelka badhtankeeda si aanay bamku ugu socon darbiga ceelka muddo dheer, taasina ay keento in bamku gariiro oo matoorku xaaqo oo gubato. .
4. Go'aami qoto dheeraanta bamka biyaha ilaa gunta ceelka iyadoo loo eegayo ciidda qulqulaya iyo xaaladaha ciidda ee ceelka. Ha ku aasin bamka dhoobada. Masaafada u jirta bamka biyaha ilaa gunta ceelka guud ahaan waa mid aan ka yarayn 3 mitir (eeg sawirka 2).
5. Moolka gelitaanka biyaha ee bamka biyuhu waa in aanu ka yarayn 1-1.5 mitir heerka biyaha firfircoon ilaa marinka biyaha gelitaanka (eeg sawirka 2). Haddii kale, xadhkaha matoorka biyaha ayaa si fudud u dhaawacmi kara.
6. Wiishka bamka biyuhu ma noqon karo mid aad u hooseeya. Haddii kale, waxaa loo baahan yahay in lagu rakibo tuubada biyaha ee albaabka ceelka si loo xakameeyo socodka bamka ee barta socodka lagu qiimeeyay si looga hortago in matoorku uu si xad dhaaf ah u raro oo uu u gubto heerka socodka badan ee socodka awgeed.
7. Marka bamka biyuhu socdo, wax-soo-saarka biyuhu waa inuu ahaado mid joogto ah oo xitaa, hadda waa inuu ahaado mid deggan (marka la qiimeeyo xaaladaha shaqada, guud ahaan wax aan ka badnayn 10% ee hadda la qiimeeyay), waana inaysan jirin gariir ama buuq. Haddii ay jiraan wax aan caadi ahayn, mashiinka waa in la joojiyaa si loo ogaado sababta oo loo tirtiro.
8. Markaad rakibayso, fiiro gaar ah u yeelo goobta siliga goynta matoorka (eeg sawirka 2). Marka dhuumaha biyuhu ay yihiin tuubo bir ah, ka soo hoggaami xajinta madaxa ceelka; marka tuubada biyuhu ay tahay tuubo caag ah, ka soo jiid calaamadda dhulka ee bamka korontada.

• （1）After the submersible pump is installed, check the insulation resistance and three-phase conduction from the switch again, check whether the instrument and the connection of the start equipment are wrong, if there is no problem, the trial machine can be started, and observe whether the indicator readings of the instrument exceed the rated voltage and current specified on the nameplate after the start, and observe whether the pump has noise and vibration phenomenon, and put into operation if everything is normal.
• （2）After the first operation of the pump for four hours, the motor should be shut down to test the thermal insulation resistance quickly, and its value should not be less than 0.5 megaohm.
• （3）After the pump is shut down, it should be started after five minutes to prevent the water column in the pipe from being completely reflowed and causing excessive motor current and burnout.
• （4）After the pump is put into normal operation, in order to prolong its service life, it is necessary to check whether the supply voltage, working current and insulation resistance are normal regularly. If the following conditions are found, the pump should be shut down immediately to troubleshoot.
•  
• 1 In the rated condition, the current exceeds 20%.
• 2 Heerka biyaha firfircooni wuxuu hoos ugu dhacaa qaybta biyaha soo gelista, taasoo keenaysa biyo kala go'a.
• 3 Bamka hoos mara waxa uu leeyahay gariir ama buuq daran.
• 4 Danab sahaydu waxa ay ka hoosaysaa 340 volts.
• 5 Fiyuus baa gubtay.
• 6 Dhuumaha biyaha ayaa dhaawacmay.
• 7 The motor's thermal insulation resistance is lower than 0.5 megaohm.
•  
• （5）Unit disassembly:
• 1 Untie the cable tie, remove the pipeline part, and remove the wire plate.
• 2 marooji boodhka biyaha, biyaha geli qolka matoorka.
• 3 ka saar shaandhada, fur furaha go'an ee isku xidhka si aad u hagaajisid usha matoorka.
• 4 hoos u daadi boodhka ku xidha qaybta biyaha soo galitaanka ee matoorka, oo kala saar bamka matoorka (fiiri barkinta cutubka markaad kala saarayso, si aad uga hortagto qaloocinta usha bamka)
• 5 isku xigxiga kala furfurida matoorku waa: (fiiri sawirka 1) qaybta gelitaanka biyaha, impeller, qolofka weecinta, impeller...... hubi jidhka waalka, marka aad ka saarayso impeller-ga, isticmaal qalab gaar ah si aad u dabciso gacanta conical ee go'an impeller marka hore, oo iska ilaali foorarsiga iyo nabarka usheeda dhexe ee bamka ee habka kala diridda.
• 6 habka kala furfurida matoorku waa: (fiiri sawirka 1) dhig mishiinka matoorka, oo ka saar lowska, saldhiga, usheeda dhexe ee qufulka, saxanka riixa, furaha, kursiga hagaha hoose iyo boodhka madaxa labajibbaaran ee hoose ee matoorka markeeda, ka dibna soo saar rotor-ka (fiiro gaar ah u yeelo inaadan dhaawacmin xirmada siliga) oo ugu dambeyntii ka saar qaybta isku xirka iyo kursiga hagaha sare ee hagaha.
• 7 unit unit: ka hor inta shirka, miridhku iyo wasakh ee qaybaha waa in la nadiifiyaa, oo dusha sare ee galmoodka iyo dhejisyada lagu dahaadhay shaabadeynta, ka dibna la isugu soo ururiyey si ka soo horjeeda kala dissembly (shirka matooruhu kor iyo hoos u dhaqaaqo ka dib markii shirka ilaa hal. millimitir), ka dib marka la isku daro, isku-xirku waa inuu noqdaa mid dabacsan, ka dibna mashiinka tijaabada shaandhada. Bambooyin hoos yimaada waa in laga soo saaraa ceelka si loo burburiyo loona dayactiro sida ku cad qodobka 5 sanadka shaqada ka dib, ama wax ka yar hal sano oo shaqeynaya laakiin laba sano oo quusin ah, qaybaha duugoobayna waa in la beddelaa.

This product is a submersible pump. In order to ensure that your equipment can work effectively for a long time, we provide the following suggestions: In winter, pay special attention to draining the water in the motor cavity to prevent freezing; roll up the cable and tie it well.When storage, select a room with a temperature below 40 °C and no corrosive substances or gases. When not in use for a long time, be sure to prevent the submersible pump from rusting.These simple methods will improve the service life and performance of the product, ensuring that you can fully enjoy the convenience and benefits it brings.

01 Qaadashada biyaha ceelka qoto dheer

02 Biyo-helid-sare

03 biyaha buuraha

04 munaaradaha biyaha

05 waraabka beeraha

06 waraabka beerta

07 qaadashada biyaha webiga

08 biyaha guriga