SP Series All Stainless Steel Water Filled Deep Well Pump

Серија SP Пумпа за длабоки бунари исполнети со вода од нерѓосувачки челик

Преземете OEM обработка! Според барањата на корисникот, дизајн и производство на различни видови на посебни барања на нестандардни потопни мотори и пумпа. Стандарди за имплементација на производот: GB/T2816-2014 „добро потопна пумпа“, GB/T2818-2014 „добро потопен асинхрон мотор“. WhatsApp: 17855846335

КОНТАКТИРАЈ СЕГА PDF DOWNLOAD

Детали

Тагови

Преглед на производот

The motor is filled with clean water, and the special wear-resistant sleeve with water as the medium (no grease and no pollution). The impeller group is made of stainless steel 304, which is corrosion-resistant, wear-resistant, energy-saving and environmentally friendly, suitable for extracting underground drinking water, fountains, seawater, and can also be used for beverage, food, petrochemical industry, marine fire protection, etc.

Услови за употреба

1, напојување: трифазен AC 380V (толеранција + / - 5%), 50HZ (толеранција + / - 1%).

2, квалитетот на водата:

(1) water temperature is not higher than 20 °C;

(2) содржината на цврсти нечистотии (масен однос) не е поголема од 0,01%;

(3) PH вредност (рН) 6,5-8,5;

(4) содржината на водород сулфид не е поголема од 1,5 mg/L;

(5) содржината на хлоридни јони не е поголема од 400 mg/L.

3, моторот е затворен или наполнет со вода влажна структура, пред употреба, потопната шуплина на моторот мора да биде полна со чиста вода, за да се спречи лажно целосно, а потоа затегнете ја вбризгувањето на вода, завртките за ослободување на воздухот, инаку не е дозволено да се користат

4, потопната пумпа мора целосно да се потопи во водата, длабочината на нуркање не е поголема од 70 метри, дното на потопната пумпа од дното на бунарот не е помало од 3 метри.

5, протокот на вода од бунарот треба да може да го исполни излезот на вода на потопната пумпа и континуираното работење, излезот на вода на потопната пумпа треба да се контролира на 0,7 - 1,2 пати повеќе од номиналниот проток.

6, бунарот треба да биде исправен, потопната пумпа не може да се користи или фрли, само вертикална употреба.

7, потопната пумпа мора да се совпадне со кабелот според барањата и надворешниот уред за заштита од преоптоварување. 8, пумпата е строго забранета без машина за тестирање без оптоварување вода

Значење на моделот

Делумна референца на моделот

4SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
4SP2-92/23	2	92	1,1 kw	105	110以上
4SP2-112/28		112	1,5 kw
4SP2-132/33		132	1,5 kw
4SP2-160/40		160	2,2 kw
4SP2-192/48		192	2,2 kw
4SP2-220/55		220	3 kw
4SP3-64/15	3	64	1,1 kw	105	110 以上
4SP3-77/18		77	1,1 kw
4SP3-94/22		94	1,5 kw
4SP3-107/25		107	1,5 kw
4SP3-137/32		137	2,2 kw
4SP3-167/39		167	3 kw
4SP3-188/44		188	3 kw
4SP3-222/52		222	4 kw
4SP5-48/12	5	48	1,1 kw	105	110 以上
4SP5-68/17		68	1,5 kw
4SP5-88/22		88	2,2 kw
4SP5-100/25		100	2,2 kw
4SP5-132/33		132	3 kw
4SP5-152/38		152	4KW
4SP5-160/40		160	4 kw
4SP5-176/44		176	4 kw
4SP5-208/52		208	5,5 kw
4SP5-260/65		260	7,5 KW
4SP5-300/75		300	7,5 KW

4SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
4SP8-30/7	8	30	1.1KW	105	110以上
4SP8-43/10		43	1.5KW
4SP8-51/12		51	2.2KW
4SP8-60/14		60	2.2KW
4SP8-77/18		77	3KW
4SP8-90/21		90	4KW
4SP8-103/24		103	4KW
4SP8-129/30		129	5,5 KW
4SP8-150/35		150	5,5 KW
4SP8-172/40		172	7,5 KW
4SP8-189/44		189	7,5 KW
4SP8-210/50		210	7,5 KW
4SP14-22/5	14	22	1.5KW	105	110以上
4SP14-31/7		31	2.2KW
4SP14-44/10		44	3KW
4SP14-57/13		57	4KW
4SP14-66/15		66	5,5 KW
4SP14-79/18		79	5,5 KW
4SP14-93/21		93	7,5 KW
4SP14-110/25		110	7,5 KW

5SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
5SP8-50/6	8	50	2,2 kw	130	135
5SP8-75/9		75	3 kw
5SP8-100/12		100	4 kw
5SP8-133/16		133	5,5 kw
5SP8-191/23		191	9,2 kw
5SP8-224/27		224	11 kw
5SP8-274/33		274	13 kw
5SP8-324/39		324	15 kw
5SP8-373/45		373	18,5 kw
5SP10-36/4	10	36	2,2 kw	130	135
5SP10-45/5		45	3 kw
5SP10-63/7		63	4 kw
5SP10-90/10		90	5,5 kw
5SP10-126/14		126	7,5 kw
5SP10-153/17		153	9,2 kw
5SP10-189/21		189	11 kw
5SP10-225/25		225	13 kw
5SP10-261/29		261	15 kw
5SP10-324/36		324	18,5 kw
5SP10-360/40		360	22 kw

5SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
5SP15-25/3	15	25	2.2KW	130	135
5SP15-42/5		42	3KW
5SP15-59/7		59	4KW
5SP15-76/9		76	5,5 KW
5SP15-93/11		93	7,5 KW
5SP15-110/13		110	7,5 KW
5SP15-127/15		127	9,2 KW
5SP15-144/17		144	11 KW
5SP15-161/19		161	11 KW
5SP15-178/21		178	13 KW
5SP15-195/23		195	15 KW
5SP15-255/30		255	18,5 KW
5SP15-300/35		300	22 KW
5SP15-340/40		340	25 KW
5SP20-23/3	20	23	2,2 kw	130	135
5SP20-30/4		30	3 kw
5SP20-38/5		38	4 kw
5SP20-53/7		53	5,5 kw
5SP20-75/10		75	7,5 kw
5SP20-90/12		90	9,2 kw
5SP20-113/15		113	11 kw
5SP20-135/18		135	13 kw
5SP20-158/21		158	15 kw
5SP20-195/26		195	18,5 kw
5SP20-225/30		225	22 kw
5SP20-270/36		270	25 KW
5SP20-310/42		310	30 KW
5SP25-23/3	25	23	2,2 kw	130	135
5SP25-30/4		30	3 kw
5SP25-38/5		38	4 kw
5SP25-45/6		45	5,5 kw
5SP25-68/9		68	7,5 kw
5SP25-83/11		83	9,2 kw
5SP25-98/13		98	11 kw
5SP25-120/16		120	13 kw
5SP25-143/19		143	15 kw
5SP25-173/23		173	18,5 kw
5SP25-210/28		210	22 kw
5SP25-235/32		235	25 KW
5SP25-285/39		285	30 KW

5SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
5SP30-14/2	30	14	2.2KW	130	135
5SP30-21/3		21	3KW
5SP30-28/4		28	4KW
5SP30-35/5		35	5,5 KW
5SP30-42/6		42	5,5 KW
5SP30-49/7		49	7,5 KW
5SP30-56/8		56	7,5 KW
5SP30-63/9		63	9,2 kw
5SP30-70/10		70	9,2 kw
5SP30-77/11		77	11 kw
5SP30-84/12		84	11 kw
5SP30-91/13		91	13 kw
5SP30-98/14		98	13 kw
5SP30-105/15		105	15 kw
5SP30-112/16		112	15 kw
5SP30-136/20		136	18,5 KW
5SP30-154/22		154	22 KW
5SP30-172/25		172	25 KW
5SP30-210/30		210	30 KW

6SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	дијаметар (мм)
6SP10-35/4	10	35	2,2 kw	143	150
6SP10-53/6		53	3 kw
6SP10-70/8		70	4 kw
6SP10-96/11		96	5,5 kw
6SP10-131/15		131	7,5 kw
6SP10-157/18		157	9,2 kw
6SP10-192/22		192	11 kw
6SP10-226/26		226	13 kw
6SP10-261/30		261	15 kw
6SP10-322/37		322	18,5 kw
6SP17-40/5	17	40	3 kw	143	150
6SP17-48/6		48	4 kw
6SP17-72/9		72	5,5 kw
6SP17-96/12		96	7,5 kw
6SP17-128/16		128	9,2 kw
6SP17-152/19		152	11 kw
6SP17-168/21		168	13 kw
6SP17-208/26		208	15 kw
6SP17-256/32		256	18,5 kw
6SP17-312/39		312	22 kw
6SP20-37/4	20	37	3 kw	143	150
6SP20-43/5		43	4 kw
6SP20-68/8		68	5,5 kw
6SP20-85/10		85	7,5 kw
6SP20-111/13		111	9,2 kw
6SP20-136/16		136	11 kw
6SP20-162/19		162	13 kw
6SP20-196/23		196	15 kw
6SP20-230/27		230	18,5 kw
6SP20-281/33		281	22 kw
6SP20-332/39		332	25 kw

6SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
6SP25-33/4	25	33	4 kw	143	150
6SP25-49/6		49	5,5 kw
6SP25-74/9		74	7,5 kw
6SP25-90/11		90	9,2 kw
6SP25-106/13		106	11 kw
6SP25-122/15		122	13 kw
6SP25-147/18		147	15 kw
6SP25-180/22		180	18,5 kw
6SP25-212/26		212	22 kw
6SP25-245/30		245	25 kw
6SP25-293/36		293	30 kw
6SP25-325/40		325	37kw
6SP25-360/44		360	37kw
6SP25-390/48		390	45kw
6SP25-431/53		431	45kw
6SP30-23/3	30	23	3 kw	143	150
6SP30-30/4		30	4 kw
6SP30-38/5		38	5,5 kw
6SP30-53/7		53	7,5 kw
6SP30-75/10		75	9,2 kw
6SP30-90/12		90	11 kw
6SP30-105/14		105	13 kw
6SP30-120/16		120	15 kw
6SP30-150/20		150	18,5 kw
6SP30-188/25		188	22 kw
6SP30-210/28		210	25 kw
6SP30-255/34		255	30 kw
6SP30-293/25		293	37kw
6SP30-351/30		351	45kw
6SP30-410/35		410	55kw
6SP30-468/40		468	63kw

6SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
6SP35-20/2	35	20	3 kw	143	150
6SP35-30/3		30	4 kw
6SP35-40/4		40	5,5 kw
6SP35-51/5		51	7,5 kw
6SP35-61/6		61	9,2 kw
6SP35-72/7		72	11 kw
6SP35-82/8		82	13 kw
6SP35-102/10		102	15 kw
6SP35-123/12		123	18,5 kw
6SP35-143/14		143	22 kw
6SP35-164/16		164	25 kw
6SP35-204/20		204	30 kw
6SP35-255/25		255	37kw
6SP35-306/30		306	45kw
6SP35-360/35		360
6SP35-410/40		410	63kw
6SP40-18/2	40	18	3 kw	143	150
6SP40-27/3		27	5,5 kw
6SP40-45/5		45	7,5 kw
6SP40-55/6		55
6SP40-64/7		64	11 kw
6SP40-74/8		74
6SP40-92/10		92	15 kw
6SP40-110/12		110	18,5 kw
6SP40-129/14		129	22 kw
6SP40-145/16		145	25 kw
6SP40-184/20		184	30 kw
6SP40-220/24		220	37kw
6SP40-320/35		320	55kw
6SP40-360/40		360	63kw
6SP46-17/2	46	17	3 kw	143	150
6SP46-25/3		25	5,5 kw
6SP46-45/5		45	7,5 kw
6SP46-54/6		54	9,2 kw
6SP46-63/7		63	kw
6SP46-72/8		72	13 kw
6SP46-90/10		90	15 kw
6SP46-108/12		108	18,5 kw
6SP46-126/14		126	22 kw
6SP46-144/16		144	25 kw
6SP46-180/20		180	30 kw
6SP46-207/23		207	37kw
6SP46-252/28		252	45kw
6SP46-270/30		270	45kw
6SP46-315/35		315	55kw
6SP46-360/40		360	63kw

6SPstainless steel submersible pumps
Модел	Проток m³/h	Head (m)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
6SP50-8/1	50	8	1,5 kw	143	150
6SP50-17/2		17	3 kw
6SP50-25/3		25	5,5 kw
6SP50-34/4		34	7,5 kw
6SP50-43/5		43	7,5 kw
6SP50-51/6		51	9,2 kw
6SP50-60/7		60	11 kw
6SP50-68/8		68	13 kw
6SP50-86/10		86	15 kw
6SP50-103/12		103	18,5 kw
6SP50-120/14		120	22 kw
6SP50-137/16		137	25 kw
6SP50-154/18		154	30 kw
6SP50-172/20		172	30 kw
6SP50-206/24		206	37kw
6SP50-258/30		258	45kw
6SP50-300/35		300	55kw
6SP50-344/40		344	63kw
6SP60-15/2	60	15	4 kw	143	150
6SP60-23/3		23	5,5 kw
6SP60-30/4		30	7,5 kw
6SP60-38/5		38	9,2 kw
6SP60-45/6		45
6SP60-53/7		53	13 kw
6SP60-60/8		60	15 kw
6SP60-68/9		68	18,5 kw
6SP60-83/11		83	22 kw
6SP60-105/14		105	25 kw
6SP60-120/16		120	30 kw
6SP60-150/18		150	37kw
6SP60-200/24		200	45kw
6SP60-232/28		232	55kw
6SP60-265/32		265	63kw
6SP70-6/1	70	6	2,2 kw	143	150
6SP70-12/2		12	4 kw
6SP70-19/3		19	5,5 kw
6SP70-25/4		25	7,5 kw
6SP70-32/5		32	9,2 kw
6SP70-38/6		38	11 kw
6SP70-51/8		51	15 kw
6SP70-58/9		58	18,5 kw
6SP70-64/10		64	18,5 kw
6SP70-70/11		70	22 kw
6SP70-77/12		77	22 kw
6SP70-84/13		84	25 kw
6SP70-90/14		90	25 kw
6SP70-97/15		97	30 kw
6SP70-103/16		103	30 kw
6SP70-116/18		116	37kw
6SP70-128/20		128	37kw
6SP70-155/24		155	45kw
6SP70-180/28		180	55kw
6SP70-210/32		210	63kw

8SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
8SP77-12/1	77	12	4KW	184	200
8SP77-25/2		25	7,5 KW
8SP77-37/3		37	11 KW
8SP77-50/4		50	15 KW
8SP77-61/5		61	18,5 KW
8SP77-74/6		74	22 KW
8SP77-86/7		86	26KW
8SP77-99/8		99	30 KW
8SP77-123/10		123	37KW
8SP77-148/12		148	45KW
8SP77-185/15		185	55KW
8SP77-210/17		210	63KW
8SP77-246/20		246	75KW
8SP95-12/1	95	12	5,5 KW	184	200
8SP95-24/2		24	9,2 KW
8SP95-36/3		36	13 KW
8SP95-48/4		48	18,5 KW
8SP95-60/5		60	22 KW
8SP95-72/6		72	26KW
8SP95-96/8		96	37KW
8SP95-120/10		120	45KW
8SP95-132/11		132	55KW
8SP95-144/12		144	55KW
8SP95-168/14		168	63KW
8SP95-193/16		193	75KW
8SP95-240/20		240	93KW
8SP120-12	120	12	7,5 KW	184	200
8SP120-24		24	13 KW
8SP120-36		36	18,5 KW
8SP120-48		48	22 KW
8SP120-60		60	30 KW
8SP120-72		72	37KW
8SP120-84		84	45KW
8SP120-96		96	55KW
8SP120-108		108	55KW
8SP120-120		120	63KW

10SPstainless steel submersible pumps
Модел	Проток m³/h	Глава (м)	Мотор Моќ (KW)	Единица дијаметар (мм)	diameter (mm)
10SP125-20	125	20	11 KW	233	250
10SP125-40		40	22 KW
10SP125-60		60	30 KW
10SP125-80		80	45KW
10SP125-100		100	55KW
10SP125-120		120	63KW
10SP125-140		140	75KW
10SP125-160		160	93KW
10SP125-180		180	93KW
10SP160-20	160	20	13 KW	233	250
10SP160-40		40	26KW
10SP160-60		60	37KW
10SP160-80		80	55KW
10SP160-100		100	63KW
10SP160-120		120	75KW
10SP160-140		140	93KW
10SP160-160		160	93KW
10SP160-180		180	110KW

Безбедносни мерки на претпазливост

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade of 380/50HZ, the use of other voltage grades of submersible motors need to be customized. The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious signs:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering is the same as the steering instructions. When the pump is upright, pay attention to safety, prevent overturning injury.

5, строго во согласност со одредбите на пумпата подигање, опсегот на проток на употреба, за да се спречи нискиот проток или високата сила на пумпање, лежиштето на удар и другите делови на абење, преоптоварувањето на моторот изгорено

6, after the pump down the well, the measurement of the motor to the ground insulation resistance should not be less than 100M, after the start to observe the voltage and current, check the motor winding insulation, whether in line with the requirements; pump storage location temperature if less than freezing point, should be dry the motor cavity water, prevent the motor cavity water ice damage caused by low temperature.

Одржување и одржување

This product is a submersible pump. After installation, the insulation resistance and three-phase continuity should be rechecked to ensure the connection between the instrument and the starting equipment.If everything is normal, the machine can be tested. After starting, observe whether the readings of the instruments are correct. If the rated voltage and current beyond the nameplate, pay attention to whether the pump has noise or vibration.If everything is normal, it can be put into operation. After the first operation for four hours, the pump should be closed and the motor thermal insulation resistance test should be carried out quickly, and the value should not be less than 0.5 megaohm. After stopping the pump, it is necessary to restart it at an interval of five minutes to prevent the water column in the pipeline from completely reversing, causing excessive current and burning the motor. After normal operation, the power supply voltage, running current and insulation resistance should be checked regularly. If abnormal conditions are found, the machine should be stopped immediately to troubleshoot. When disassembling, it is necessary to untie the cable rope, remove the pipeline part, remove the line protection plate, and dry all the water in the motor cavity side by side. The disassembly sequence includes taking off the filter element, loosening the bolt of the coupling fixed to the motor shaft, unscrewing the bolt connecting the water inlet and the motor, separating the pump and the motor (pay attention to keeping the unit level when separating to avoid bending the pump shaft) and other steps. For motor disassembly, it is necessary to remove the nut, base, shaft head lock nut, thrust plate, key, lower guide, bearing seat, screw (pull rod screw), take out the rotor, and finally take out the connection part and upper guide bearing seat. When assembling the unit, it is necessary to clean the rust and dirt of each part, apply sealant and assemble in reverse order according to the disassembly. When running once a year or the operation time is less than one year but the immersion time is two years, it is necessary to disassemble and inspect in accordance with the provisions and replace the worn parts. Storage needs to empty the water in the motor cavity, pay attention to the anticorrosive wire mesh plate and tie the cable, stored in a room with a temperature below 40 DEG C and no corrosive substances and gases, and pay attention to rust prevention when not used for a long time.

Апликативни сценарија

01 Внес на вода во длабок бунар

02 Високи водоводи

03 планински водовод

04 кула вода

05 Земјоделско наводнување

06 наводнување на градината

07 зафат на река

08 домашна вода

Доколку сте заинтересирани за нашите производи, можете да изберете да ги оставите вашите информации овде, а ние ќе стапиме во контакт со вас наскоро.

Напишете ја вашата порака овде и испратете ни ја

поврзани производи