SP Series All Stainless Steel Water Filled Deep Well Pump

Sèrie SP Bomba de pou profund plena d'aigua d'acer inoxidable

Feu el processament OEM! Segons els requisits de l'usuari, disseny i fabricació de diversos tipus de requisits especials de motor i bomba submergibles no estàndard. Els estàndards d'implementació del producte: GB/T2816-2014 "bomba submergible de pou", GB/T2818-2014 "motor asíncron submergible de pou". WhatsApp: 17855846335

CONTACTE ARA PDF DOWNLOAD

Detalls

Etiquetes

Descripció general del producte

The motor is filled with clean water, and the special wear-resistant sleeve with water as the medium (no grease and no pollution). The impeller group is made of stainless steel 304, which is corrosion-resistant, wear-resistant, energy-saving and environmentally friendly, suitable for extracting underground drinking water, fountains, seawater, and can also be used for beverage, food, petrochemical industry, marine fire protection, etc.

Condicions d'ús

1, font d'alimentació: AC trifàsica 380V (tolerància + / - 5%), 50 HZ (tolerància + / - 1%).

2, qualitat de l'aigua:

(1) water temperature is not higher than 20 °C;

(2) el contingut d'impureses sòlides (proporció de massa) no és superior al 0,01%;

(3) valor de pH (pH) 6,5-8,5;

(4) el contingut de sulfur d'hidrogen no és superior a 1,5 mg/L;

(5) El contingut d'ions clorur no és superior a 400 mg/L.

3, el motor està tancat o l'estructura humida plena d'aigua, abans d'utilitzar-la, la cavitat del motor submergible ha d'estar plena d'aigua neta, per evitar un ple fals, i després apretar la injecció d'aigua, els cargols d'alliberament d'aire, en cas contrari no es permet l'ús

4, la bomba submergible ha d'estar completament submergida a l'aigua, la profunditat de busseig no és superior a 70 m, el fons de la bomba submergible des del fons del pou no és inferior a 3 m.

5, el cabal d'aigua del pou ha de poder satisfer la sortida d'aigua de la bomba submergible i el funcionament continu, la sortida d'aigua de la bomba submergible s'ha de controlar entre 0,7 i 1,2 vegades el cabal nominal.

6, el pou ha de ser recte, la bomba submergible no es pot utilitzar ni abocar, només ús vertical.

7, la bomba submergible s'ha de combinar amb el cable segons els requisits i el dispositiu extern de protecció contra sobrecàrregues. 8, la bomba està estrictament prohibida sense màquina de prova d'aigua sense càrrega

Significat del model

Referència del model parcial

4SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
4SP2-92/23	2	92	1,1 kW	105	110以上
4SP2-112/28		112	1,5 kW
4SP2-132/33		132	1,5 kW
4SP2-160/40		160	2,2 kW
4SP2-192/48		192	2,2 kW
4SP2-220/55		220	3kw
4SP3-64/15	3	64	1,1 kW	105	110 以上
4SP3-77/18		77	1,1 kW
4SP3-94/22		94	1,5 kW
4SP3-107/25		107	1,5 kW
4SP3-137/32		137	2,2 kW
4SP3-167/39		167	3kw
4SP3-188/44		188	3kw
4SP3-222/52		222	4kw
4SP5-48/12	5	48	1,1 kW	105	110 以上
4SP5-68/17		68	1,5 kW
4SP5-88/22		88	2,2 kW
4SP5-100/25		100	2,2 kW
4SP5-132/33		132	3kw
4SP5-152/38		152	4KW
4SP5-160/40		160	4kw
4SP5-176/44		176	4kw
4SP5-208/52		208	5,5 kW
4SP5-260/65		260	7,5 kW
4SP5-300/75		300	7,5 kW

4SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
4SP8-30/7	8	30	1.1KW	105	110以上
4SP8-43/10		43	1.5KW
4SP8-51/12		51	2.2KW
4SP8-60/14		60	2.2KW
4SP8-77/18		77	3KW
4SP8-90/21		90	4KW
4SP8-103/24		103	4KW
4SP8-129/30		129	5,5 kW
4SP8-150/35		150	5,5 kW
4SP8-172/40		172	7,5 kW
4SP8-189/44		189	7,5 kW
4SP8-210/50		210	7,5 kW
4SP14-22/5	14	22	1.5KW	105	110以上
4SP14-31/7		31	2.2KW
4SP14-44/10		44	3KW
4SP14-57/13		57	4KW
4SP14-66/15		66	5,5 kW
4SP14-79/18		79	5,5 kW
4SP14-93/21		93	7,5 kW
4SP14-110/25		110	7,5 kW

5SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
5SP8-50/6	8	50	2,2 kW	130	135
5SP8-75/9		75	3kw
5SP8-100/12		100	4kw
5SP8-133/16		133	5,5 kW
5SP8-191/23		191	9,2 kW
5SP8-224/27		224	11kw
5SP8-274/33		274	13kw
5SP8-324/39		324	15kw
5SP8-373/45		373	18,5 kW
5SP10-36/4	10	36	2,2 kW	130	135
5SP10-45/5		45	3kw
5SP10-63/7		63	4kw
5SP10-90/10		90	5,5 kW
5SP10-126/14		126	7,5 kW
5SP10-153/17		153	9,2 kW
5SP10-189/21		189	11kw
5SP10-225/25		225	13kw
5SP10-261/29		261	15kw
5SP10-324/36		324	18,5 kW
5SP10-360/40		360	22kw

5SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
5SP15-25/3	15	25	2.2KW	130	135
5SP15-42/5		42	3KW
5SP15-59/7		59	4KW
5SP15-76/9		76	5,5 kW
5SP15-93/11		93	7,5 kW
5SP15-110/13		110	7,5 kW
5SP15-127/15		127	9,2 kW
5SP15-144/17		144	11 kW
5SP15-161/19		161	11 kW
5SP15-178/21		178	13 kW
5SP15-195/23		195	15 kW
5SP15-255/30		255	18,5 kW
5SP15-300/35		300	22 kW
5SP15-340/40		340	25 kW
5SP20-23/3	20	23	2,2 kW	130	135
5SP20-30/4		30	3kw
5SP20-38/5		38	4kw
5SP20-53/7		53	5,5 kW
5SP20-75/10		75	7,5 kW
5SP20-90/12		90	9,2 kW
5SP20-113/15		113	11kw
5SP20-135/18		135	13kw
5SP20-158/21		158	15kw
5SP20-195/26		195	18,5 kW
5SP20-225/30		225	22kw
5SP20-270/36		270	25 kW
5SP20-310/42		310	30 kW
5SP25-23/3	25	23	2,2 kW	130	135
5SP25-30/4		30	3kw
5SP25-38/5		38	4kw
5SP25-45/6		45	5,5 kW
5SP25-68/9		68	7,5 kW
5SP25-83/11		83	9,2 kW
5SP25-98/13		98	11kw
5SP25-120/16		120	13kw
5SP25-143/19		143	15kw
5SP25-173/23		173	18,5 kW
5SP25-210/28		210	22kw
5SP25-235/32		235	25 kW
5SP25-285/39		285	30 kW

5SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
5SP30-14/2	30	14	2.2KW	130	135
5SP30-21/3		21	3KW
5SP30-28/4		28	4KW
5SP30-35/5		35	5,5 kW
5SP30-42/6		42	5,5 kW
5SP30-49/7		49	7,5 kW
5SP30-56/8		56	7,5 kW
5SP30-63/9		63	9,2 kW
5SP30-70/10		70	9,2 kW
5SP30-77/11		77	11kw
5SP30-84/12		84	11kw
5SP30-91/13		91	13kw
5SP30-98/14		98	13kw
5SP30-105/15		105	15kw
5SP30-112/16		112	15kw
5SP30-136/20		136	18,5 kW
5SP30-154/22		154	22 kW
5SP30-172/25		172	25 kW
5SP30-210/30		210	30 kW

6SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diàmetre (mm)
6SP10-35/4	10	35	2,2 kW	143	150
6SP10-53/6		53	3kw
6SP10-70/8		70	4kw
6SP10-96/11		96	5,5 kW
6SP10-131/15		131	7,5 kW
6SP10-157/18		157	9,2 kW
6SP10-192/22		192	11kw
6SP10-226/26		226	13kw
6SP10-261/30		261	15kw
6SP10-322/37		322	18,5 kW
6SP17-40/5	17	40	3kw	143	150
6SP17-48/6		48	4kw
6SP17-72/9		72	5,5 kW
6SP17-96/12		96	7,5 kW
6SP17-128/16		128	9,2 kW
6SP17-152/19		152	11kw
6SP17-168/21		168	13kw
6SP17-208/26		208	15kw
6SP17-256/32		256	18,5 kW
6SP17-312/39		312	22kw
6SP20-37/4	20	37	3kw	143	150
6SP20-43/5		43	4kw
6SP20-68/8		68	5,5 kW
6SP20-85/10		85	7,5 kW
6SP20-111/13		111	9,2 kW
6SP20-136/16		136	11kw
6SP20-162/19		162	13kw
6SP20-196/23		196	15kw
6SP20-230/27		230	18,5 kW
6SP20-281/33		281	22kw
6SP20-332/39		332	25kw

6SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
6SP25-33/4	25	33	4kw	143	150
6SP25-49/6		49	5,5 kW
6SP25-74/9		74	7,5 kW
6SP25-90/11		90	9,2 kW
6SP25-106/13		106	11kw
6SP25-122/15		122	13kw
6SP25-147/18		147	15kw
6SP25-180/22		180	18,5 kW
6SP25-212/26		212	22kw
6SP25-245/30		245	25kw
6SP25-293/36		293	30kw
6SP25-325/40		325	37kw
6SP25-360/44		360	37kw
6SP25-390/48		390	45kw
6SP25-431/53		431	45kw
6SP30-23/3	30	23	3kw	143	150
6SP30-30/4		30	4kw
6SP30-38/5		38	5,5 kW
6SP30-53/7		53	7,5 kW
6SP30-75/10		75	9,2 kW
6SP30-90/12		90	11kw
6SP30-105/14		105	13kw
6SP30-120/16		120	15kw
6SP30-150/20		150	18,5 kW
6SP30-188/25		188	22kw
6SP30-210/28		210	25kw
6SP30-255/34		255	30kw
6SP30-293/25		293	37kw
6SP30-351/30		351	45kw
6SP30-410/35		410	55kw
6SP30-468/40		468	63kw

6SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
6SP35-20/2	35	20	3kw	143	150
6SP35-30/3		30	4kw
6SP35-40/4		40	5,5 kW
6SP35-51/5		51	7,5 kW
6SP35-61/6		61	9,2 kW
6SP35-72/7		72	11kw
6SP35-82/8		82	13kw
6SP35-102/10		102	15kw
6SP35-123/12		123	18,5 kW
6SP35-143/14		143	22kw
6SP35-164/16		164	25kw
6SP35-204/20		204	30kw
6SP35-255/25		255	37kw
6SP35-306/30		306	45kw
6SP35-360/35		360
6SP35-410/40		410	63kw
6SP40-18/2	40	18	3kw	143	150
6SP40-27/3		27	5,5 kW
6SP40-45/5		45	7,5 kW
6SP40-55/6		55
6SP40-64/7		64	11kw
6SP40-74/8		74
6SP40-92/10		92	15kw
6SP40-110/12		110	18,5 kW
6SP40-129/14		129	22kw
6SP40-145/16		145	25kw
6SP40-184/20		184	30kw
6SP40-220/24		220	37kw
6SP40-320/35		320	55kw
6SP40-360/40		360	63kw
6SP46-17/2	46	17	3kw	143	150
6SP46-25/3		25	5,5 kW
6SP46-45/5		45	7,5 kW
6SP46-54/6		54	9,2 kW
6SP46-63/7		63	kw
6SP46-72/8		72	13kw
6SP46-90/10		90	15kw
6SP46-108/12		108	18,5 kW
6SP46-126/14		126	22kw
6SP46-144/16		144	25kw
6SP46-180/20		180	30kw
6SP46-207/23		207	37kw
6SP46-252/28		252	45kw
6SP46-270/30		270	45kw
6SP46-315/35		315	55kw
6SP46-360/40		360	63kw

6SPstainless steel submersible pumps
Model	Flux m³/h	Head (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
6SP50-8/1	50	8	1,5 kW	143	150
6SP50-17/2		17	3kw
6SP50-25/3		25	5,5 kW
6SP50-34/4		34	7,5 kW
6SP50-43/5		43	7,5 kW
6SP50-51/6		51	9,2 kW
6SP50-60/7		60	11kw
6SP50-68/8		68	13kw
6SP50-86/10		86	15kw
6SP50-103/12		103	18,5 kW
6SP50-120/14		120	22kw
6SP50-137/16		137	25kw
6SP50-154/18		154	30kw
6SP50-172/20		172	30kw
6SP50-206/24		206	37kw
6SP50-258/30		258	45kw
6SP50-300/35		300	55kw
6SP50-344/40		344	63kw
6SP60-15/2	60	15	4kw	143	150
6SP60-23/3		23	5,5 kW
6SP60-30/4		30	7,5 kW
6SP60-38/5		38	9,2 kW
6SP60-45/6		45
6SP60-53/7		53	13kw
6SP60-60/8		60	15kw
6SP60-68/9		68	18,5 kW
6SP60-83/11		83	22kw
6SP60-105/14		105	25kw
6SP60-120/16		120	30kw
6SP60-150/18		150	37kw
6SP60-200/24		200	45kw
6SP60-232/28		232	55kw
6SP60-265/32		265	63kw
6SP70-6/1	70	6	2,2 kW	143	150
6SP70-12/2		12	4kw
6SP70-19/3		19	5,5 kW
6SP70-25/4		25	7,5 kW
6SP70-32/5		32	9,2 kW
6SP70-38/6		38	11kw
6SP70-51/8		51	15kw
6SP70-58/9		58	18,5 kW
6SP70-64/10		64	18,5 kW
6SP70-70/11		70	22kw
6SP70-77/12		77	22kw
6SP70-84/13		84	25kw
6SP70-90/14		90	25kw
6SP70-97/15		97	30kw
6SP70-103/16		103	30kw
6SP70-116/18		116	37kw
6SP70-128/20		128	37kw
6SP70-155/24		155	45kw
6SP70-180/28		180	55kw
6SP70-210/32		210	63kw

8SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
8SP77-12/1	77	12	4KW	184	200
8SP77-25/2		25	7,5 kW
8SP77-37/3		37	11 kW
8SP77-50/4		50	15 kW
8SP77-61/5		61	18,5 kW
8SP77-74/6		74	22 kW
8SP77-86/7		86	26KW
8SP77-99/8		99	30 kW
8SP77-123/10		123	37KW
8SP77-148/12		148	45KW
8SP77-185/15		185	55KW
8SP77-210/17		210	63KW
8SP77-246/20		246	75KW
8SP95-12/1	95	12	5,5 kW	184	200
8SP95-24/2		24	9,2 kW
8SP95-36/3		36	13 kW
8SP95-48/4		48	18,5 kW
8SP95-60/5		60	22 kW
8SP95-72/6		72	26KW
8SP95-96/8		96	37KW
8SP95-120/10		120	45KW
8SP95-132/11		132	55KW
8SP95-144/12		144	55KW
8SP95-168/14		168	63KW
8SP95-193/16		193	75KW
8SP95-240/20		240	93KW
8SP120-12	120	12	7,5 kW	184	200
8SP120-24		24	13 kW
8SP120-36		36	18,5 kW
8SP120-48		48	22 kW
8SP120-60		60	30 kW
8SP120-72		72	37KW
8SP120-84		84	45KW
8SP120-96		96	55KW
8SP120-108		108	55KW
8SP120-120		120	63KW

10SPstainless steel submersible pumps
Model	Flux m³/h	Cap (m)	Motor Poder (KW)	Unitat diàmetre (mm)	diameter (mm)
10SP125-20	125	20	11 kW	233	250
10SP125-40		40	22 kW
10SP125-60		60	30 kW
10SP125-80		80	45KW
10SP125-100		100	55KW
10SP125-120		120	63KW
10SP125-140		140	75KW
10SP125-160		160	93KW
10SP125-180		180	93KW
10SP160-20	160	20	13 kW	233	250
10SP160-40		40	26KW
10SP160-60		60	37KW
10SP160-80		80	55KW
10SP160-100		100	63KW
10SP160-120		120	75KW
10SP160-140		140	93KW
10SP160-160		160	93KW
10SP160-180		180	110KW

Precaucions de seguretat

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade of 380/50HZ, the use of other voltage grades of submersible motors need to be customized. The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious signs:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering is the same as the steering instructions. When the pump is upright, pay attention to safety, prevent overturning injury.

5, estrictament d'acord amb les disposicions de l'elevació de la bomba, rang d'ús de flux, per evitar la força de bombament de baix cabal o elevació elevada, el coixinet d'empenta i altres parts del desgast, la sobrecàrrega del motor es cremi

6, after the pump down the well, the measurement of the motor to the ground insulation resistance should not be less than 100M, after the start to observe the voltage and current, check the motor winding insulation, whether in line with the requirements; pump storage location temperature if less than freezing point, should be dry the motor cavity water, prevent the motor cavity water ice damage caused by low temperature.

Manteniment i Manteniment

This product is a submersible pump. After installation, the insulation resistance and three-phase continuity should be rechecked to ensure the connection between the instrument and the starting equipment.If everything is normal, the machine can be tested. After starting, observe whether the readings of the instruments are correct. If the rated voltage and current beyond the nameplate, pay attention to whether the pump has noise or vibration.If everything is normal, it can be put into operation. After the first operation for four hours, the pump should be closed and the motor thermal insulation resistance test should be carried out quickly, and the value should not be less than 0.5 megaohm. After stopping the pump, it is necessary to restart it at an interval of five minutes to prevent the water column in the pipeline from completely reversing, causing excessive current and burning the motor. After normal operation, the power supply voltage, running current and insulation resistance should be checked regularly. If abnormal conditions are found, the machine should be stopped immediately to troubleshoot. When disassembling, it is necessary to untie the cable rope, remove the pipeline part, remove the line protection plate, and dry all the water in the motor cavity side by side. The disassembly sequence includes taking off the filter element, loosening the bolt of the coupling fixed to the motor shaft, unscrewing the bolt connecting the water inlet and the motor, separating the pump and the motor (pay attention to keeping the unit level when separating to avoid bending the pump shaft) and other steps. For motor disassembly, it is necessary to remove the nut, base, shaft head lock nut, thrust plate, key, lower guide, bearing seat, screw (pull rod screw), take out the rotor, and finally take out the connection part and upper guide bearing seat. When assembling the unit, it is necessary to clean the rust and dirt of each part, apply sealant and assemble in reverse order according to the disassembly. When running once a year or the operation time is less than one year but the immersion time is two years, it is necessary to disassemble and inspect in accordance with the provisions and replace the worn parts. Storage needs to empty the water in the motor cavity, pay attention to the anticorrosive wire mesh plate and tie the cable, stored in a room with a temperature below 40 DEG C and no corrosive substances and gases, and pay attention to rust prevention when not used for a long time.

Escenaris d'aplicació

01 Captació d'aigua de pou profund

02 Subministrament d'aigua de gran alçada

03 subministrament d'aigua de muntanya

04 torre d'aigua

05 Reg agrari

06 reg del jardí

07 captació d'aigua del riu

08 aigua domèstica

Si estàs interessat en els nostres productes, pots optar per deixar la teva informació aquí i ens posarem en contacte amb tu en breu.

Escriu el teu missatge aquí i envia'ns-ho

relacionats productes