SP Series All Stainless Steel Water Filled Deep Well Pump

Pumpa za duboki bunar serije SP potpuno od nehrđajućeg čelika punjena vodom

Poduzmite OEM obradu! Prema zahtjevima korisnika, dizajn i proizvodnja raznih vrsta posebnih zahtjeva nestandardnih potopnih motora i pumpi. Standardi za implementaciju proizvoda: GB/T2816-2014 "bunarska uronjiva pumpa", GB/T2818-2014 "bunarsko uronjivi asinkroni motor". WhatsApp: 17855846335

KONTAKTIRAJTE SADA PDF DOWNLOAD

pojedinosti

Oznake

pregled proizvoda

The motor is filled with clean water, and the special wear-resistant sleeve with water as the medium (no grease and no pollution). The impeller group is made of stainless steel 304, which is corrosion-resistant, wear-resistant, energy-saving and environmentally friendly, suitable for extracting underground drinking water, fountains, seawater, and can also be used for beverage, food, petrochemical industry, marine fire protection, etc.

Uvjeti korištenja

1, napajanje: trofazni AC 380V (tolerancija +/- 5%), 50HZ (tolerancija +/- 1%).

2, kvaliteta vode:

(1) water temperature is not higher than 20 °C;

(2) sadržaj krutih nečistoća (maseni omjer) nije veći od 0,01%;

(3) PH vrijednost (pH) 6,5-8,5;

(4) sadržaj sumporovodika nije veći od 1,5 mg/L;

(5) sadržaj kloridnih iona nije veći od 400 mg/L.

3, motor je zatvoren ili napunjen vodom mokra struktura, prije upotrebe šupljina potopnog motora mora biti puna čiste vode, kako bi se spriječilo lažno puno, a zatim zategnite ubrizgavanje vode, vijke za oslobađanje zraka, inače nije dopušteno koristiti

4, potopna pumpa mora biti potpuno uronjena u vodu, dubina ronjenja nije veća od 70 m, dno potopne pumpe od dna bunara nije manje od 3 m.

5, protok vode iz bunara trebao bi biti u stanju zadovoljiti izlaz vode potopne pumpe i kontinuirani rad, izlaz vode potopne pumpe treba kontrolirati na 0,7 - 1,2 puta od nazivnog protoka.

6, bunar bi trebao biti ravan, potopna pumpa se ne može koristiti ili baciti, samo okomita uporaba.

7, potopna pumpa mora biti usklađena s kabelom prema zahtjevima i vanjskim uređajem za zaštitu od preopterećenja. 8, pumpa je strogo zabranjena bez vode bez stroja za testiranje

Značenje modela

Djelomična referenca modela

4SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
4SP2-92/23	2	92	1.1kw	105	110以上
4SP2-112/28		112	1,5kw
4SP2-132/33		132	1,5kw
4SP2-160/40		160	2,2kw
4SP2-192/48		192	2,2kw
4SP2-220/55		220	3kw
4SP3-64/15	3	64	1.1kw	105	110 以上
4SP3-77/18		77	1.1kw
4SP3-94/22		94	1,5kw
4SP3-107/25		107	1,5kw
4SP3-137/32		137	2,2kw
4SP3-167/39		167	3kw
4SP3-188/44		188	3kw
4SP3-222/52		222	4kw
4SP5-48/12	5	48	1.1kw	105	110 以上
4SP5-68/17		68	1,5kw
4SP5-88/22		88	2,2kw
4SP5-100/25		100	2,2kw
4SP5-132/33		132	3kw
4SP5-152/38		152	4KW
4SP5-160/40		160	4kw
4SP5-176/44		176	4kw
4SP5-208/52		208	5,5kw
4SP5-260/65		260	7,5KW
4SP5-300/75		300	7,5KW

4SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
4SP8-30/7	8	30	1.1KW	105	110以上
4SP8-43/10		43	1.5KW
4SP8-51/12		51	2.2KW
4SP8-60/14		60	2.2KW
4SP8-77/18		77	3KW
4SP8-90/21		90	4KW
4SP8-103/24		103	4KW
4SP8-129/30		129	5,5KW
4SP8-150/35		150	5,5KW
4SP8-172/40		172	7,5KW
4SP8-189/44		189	7,5KW
4SP8-210/50		210	7,5KW
4SP14-22/5	14	22	1.5KW	105	110以上
4SP14-31/7		31	2.2KW
4SP14-44/10		44	3KW
4SP14-57/13		57	4KW
4SP14-66/15		66	5,5KW
4SP14-79/18		79	5,5KW
4SP14-93/21		93	7,5KW
4SP14-110/25		110	7,5KW

5SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
5SP8-50/6	8	50	2,2kw	130	135
5SP8-75/9		75	3kw
5SP8-100/12		100	4kw
5SP8-133/16		133	5,5kw
5SP8-191/23		191	9,2kw
5SP8-224/27		224	11kw
5SP8-274/33		274	13kw
5SP8-324/39		324	15kw
5SP8-373/45		373	18,5kw
5SP10-36/4	10	36	2,2kw	130	135
5SP10-45/5		45	3kw
5SP10-63/7		63	4kw
5SP10-90/10		90	5,5kw
5SP10-126/14		126	7,5kw
5SP10-153/17		153	9,2kw
5SP10-189/21		189	11kw
5SP10-225/25		225	13kw
5SP10-261/29		261	15kw
5SP10-324/36		324	18,5kw
5SP10-360/40		360	22kw

5SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
5SP15-25/3	15	25	2.2KW	130	135
5SP15-42/5		42	3KW
5SP15-59/7		59	4KW
5SP15-76/9		76	5,5KW
5SP15-93/11		93	7,5KW
5SP15-110/13		110	7,5KW
5SP15-127/15		127	9.2KW
5SP15-144/17		144	11KW
5SP15-161/19		161	11KW
5SP15-178/21		178	13KW
5SP15-195/23		195	15KW
5SP15-255/30		255	18,5KW
5SP15-300/35		300	22KW
5SP15-340/40		340	25KW
5SP20-23/3	20	23	2,2kw	130	135
5SP20-30/4		30	3kw
5SP20-38/5		38	4kw
5SP20-53/7		53	5,5kw
5SP20-75/10		75	7,5kw
5SP20-90/12		90	9,2kw
5SP20-113/15		113	11kw
5SP20-135/18		135	13kw
5SP20-158/21		158	15kw
5SP20-195/26		195	18,5kw
5SP20-225/30		225	22kw
5SP20-270/36		270	25KW
5SP20-310/42		310	30KW
5SP25-23/3	25	23	2,2kw	130	135
5SP25-30/4		30	3kw
5SP25-38/5		38	4kw
5SP25-45/6		45	5,5kw
5SP25-68/9		68	7,5kw
5SP25-83/11		83	9,2kw
5SP25-98/13		98	11kw
5SP25-120/16		120	13kw
5SP25-143/19		143	15kw
5SP25-173/23		173	18,5kw
5SP25-210/28		210	22kw
5SP25-235/32		235	25KW
5SP25-285/39		285	30KW

5SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
5SP30-14/2	30	14	2.2KW	130	135
5SP30-21/3		21	3KW
5SP30-28/4		28	4KW
5SP30-35/5		35	5,5KW
5SP30-42/6		42	5,5KW
5SP30-49/7		49	7,5KW
5SP30-56/8		56	7,5KW
5SP30-63/9		63	9,2kw
5SP30-70/10		70	9,2kw
5SP30-77/11		77	11kw
5SP30-84/12		84	11kw
5SP30-91/13		91	13kw
5SP30-98/14		98	13kw
5SP30-105/15		105	15kw
5SP30-112/16		112	15kw
5SP30-136/20		136	18,5KW
5SP30-154/22		154	22KW
5SP30-172/25		172	25KW
5SP30-210/30		210	30KW

6SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	promjer (mm)
6SP10-35/4	10	35	2,2kw	143	150
6SP10-53/6		53	3kw
6SP10-70/8		70	4kw
6SP10-96/11		96	5,5kw
6SP10-131/15		131	7,5kw
6SP10-157/18		157	9,2kw
6SP10-192/22		192	11kw
6SP10-226/26		226	13kw
6SP10-261/30		261	15kw
6SP10-322/37		322	18,5kw
6SP17-40/5	17	40	3kw	143	150
6SP17-48/6		48	4kw
6SP17-72/9		72	5,5kw
6SP17-96/12		96	7,5kw
6SP17-128/16		128	9,2kw
6SP17-152/19		152	11kw
6SP17-168/21		168	13kw
6SP17-208/26		208	15kw
6SP17-256/32		256	18,5kw
6SP17-312/39		312	22kw
6SP20-37/4	20	37	3kw	143	150
6SP20-43/5		43	4kw
6SP20-68/8		68	5,5kw
6SP20-85/10		85	7,5kw
6SP20-111/13		111	9,2kw
6SP20-136/16		136	11kw
6SP20-162/19		162	13kw
6SP20-196/23		196	15kw
6SP20-230/27		230	18,5kw
6SP20-281/33		281	22kw
6SP20-332/39		332	25kw

6SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
6SP25-33/4	25	33	4kw	143	150
6SP25-49/6		49	5,5kw
6SP25-74/9		74	7,5kw
6SP25-90/11		90	9,2kw
6SP25-106/13		106	11kw
6SP25-122/15		122	13kw
6SP25-147/18		147	15kw
6SP25-180/22		180	18,5kw
6SP25-212/26		212	22kw
6SP25-245/30		245	25kw
6SP25-293/36		293	30kw
6SP25-325/40		325	37kw
6SP25-360/44		360	37kw
6SP25-390/48		390	45kw
6SP25-431/53		431	45kw
6SP30-23/3	30	23	3kw	143	150
6SP30-30/4		30	4kw
6SP30-38/5		38	5,5kw
6SP30-53/7		53	7,5kw
6SP30-75/10		75	9,2kw
6SP30-90/12		90	11kw
6SP30-105/14		105	13kw
6SP30-120/16		120	15kw
6SP30-150/20		150	18,5kw
6SP30-188/25		188	22kw
6SP30-210/28		210	25kw
6SP30-255/34		255	30kw
6SP30-293/25		293	37kw
6SP30-351/30		351	45kw
6SP30-410/35		410	55kw
6SP30-468/40		468	63kw

6SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
6SP35-20/2	35	20	3kw	143	150
6SP35-30/3		30	4kw
6SP35-40/4		40	5,5kw
6SP35-51/5		51	7,5kw
6SP35-61/6		61	9,2kw
6SP35-72/7		72	11kw
6SP35-82/8		82	13kw
6SP35-102/10		102	15kw
6SP35-123/12		123	18,5kw
6SP35-143/14		143	22kw
6SP35-164/16		164	25kw
6SP35-204/20		204	30kw
6SP35-255/25		255	37kw
6SP35-306/30		306	45kw
6SP35-360/35		360
6SP35-410/40		410	63kw
6SP40-18/2	40	18	3kw	143	150
6SP40-27/3		27	5,5kw
6SP40-45/5		45	7,5kw
6SP40-55/6		55
6SP40-64/7		64	11kw
6SP40-74/8		74
6SP40-92/10		92	15kw
6SP40-110/12		110	18,5kw
6SP40-129/14		129	22kw
6SP40-145/16		145	25kw
6SP40-184/20		184	30kw
6SP40-220/24		220	37kw
6SP40-320/35		320	55kw
6SP40-360/40		360	63kw
6SP46-17/2	46	17	3kw	143	150
6SP46-25/3		25	5,5kw
6SP46-45/5		45	7,5kw
6SP46-54/6		54	9,2kw
6SP46-63/7		63	kw
6SP46-72/8		72	13kw
6SP46-90/10		90	15kw
6SP46-108/12		108	18,5kw
6SP46-126/14		126	22kw
6SP46-144/16		144	25kw
6SP46-180/20		180	30kw
6SP46-207/23		207	37kw
6SP46-252/28		252	45kw
6SP46-270/30		270	45kw
6SP46-315/35		315	55kw
6SP46-360/40		360	63kw

6SPstainless steel submersible pumps
Model	Teći m³/h	Head (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
6SP50-8/1	50	8	1,5kw	143	150
6SP50-17/2		17	3kw
6SP50-25/3		25	5,5kw
6SP50-34/4		34	7,5kw
6SP50-43/5		43	7,5kw
6SP50-51/6		51	9,2kw
6SP50-60/7		60	11kw
6SP50-68/8		68	13kw
6SP50-86/10		86	15kw
6SP50-103/12		103	18,5kw
6SP50-120/14		120	22kw
6SP50-137/16		137	25kw
6SP50-154/18		154	30kw
6SP50-172/20		172	30kw
6SP50-206/24		206	37kw
6SP50-258/30		258	45kw
6SP50-300/35		300	55kw
6SP50-344/40		344	63kw
6SP60-15/2	60	15	4kw	143	150
6SP60-23/3		23	5,5kw
6SP60-30/4		30	7,5kw
6SP60-38/5		38	9,2kw
6SP60-45/6		45
6SP60-53/7		53	13kw
6SP60-60/8		60	15kw
6SP60-68/9		68	18,5kw
6SP60-83/11		83	22kw
6SP60-105/14		105	25kw
6SP60-120/16		120	30kw
6SP60-150/18		150	37kw
6SP60-200/24		200	45kw
6SP60-232/28		232	55kw
6SP60-265/32		265	63kw
6SP70-6/1	70	6	2,2kw	143	150
6SP70-12/2		12	4kw
6SP70-19/3		19	5,5kw
6SP70-25/4		25	7,5kw
6SP70-32/5		32	9,2kw
6SP70-38/6		38	11kw
6SP70-51/8		51	15kw
6SP70-58/9		58	18,5kw
6SP70-64/10		64	18,5kw
6SP70-70/11		70	22kw
6SP70-77/12		77	22kw
6SP70-84/13		84	25kw
6SP70-90/14		90	25kw
6SP70-97/15		97	30kw
6SP70-103/16		103	30kw
6SP70-116/18		116	37kw
6SP70-128/20		128	37kw
6SP70-155/24		155	45kw
6SP70-180/28		180	55kw
6SP70-210/32		210	63kw

8SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
8SP77-12/1	77	12	4KW	184	200
8SP77-25/2		25	7,5KW
8SP77-37/3		37	11KW
8SP77-50/4		50	15KW
8SP77-61/5		61	18,5KW
8SP77-74/6		74	22KW
8SP77-86/7		86	26KW
8SP77-99/8		99	30KW
8SP77-123/10		123	37KW
8SP77-148/12		148	45KW
8SP77-185/15		185	55KW
8SP77-210/17		210	63KW
8SP77-246/20		246	75KW
8SP95-12/1	95	12	5,5KW	184	200
8SP95-24/2		24	9.2KW
8SP95-36/3		36	13KW
8SP95-48/4		48	18,5KW
8SP95-60/5		60	22KW
8SP95-72/6		72	26KW
8SP95-96/8		96	37KW
8SP95-120/10		120	45KW
8SP95-132/11		132	55KW
8SP95-144/12		144	55KW
8SP95-168/14		168	63KW
8SP95-193/16		193	75KW
8SP95-240/20		240	93KW
8SP120-12	120	12	7,5KW	184	200
8SP120-24		24	13KW
8SP120-36		36	18,5KW
8SP120-48		48	22KW
8SP120-60		60	30KW
8SP120-72		72	37KW
8SP120-84		84	45KW
8SP120-96		96	55KW
8SP120-108		108	55KW
8SP120-120		120	63KW

10SPstainless steel submersible pumps
Model	Teći m³/h	glava (m)	Motor Vlast (KW)	Jedinica promjer (mm)	diameter (mm)
10SP125-20	125	20	11KW	233	250
10SP125-40		40	22KW
10SP125-60		60	30KW
10SP125-80		80	45KW
10SP125-100		100	55KW
10SP125-120		120	63KW
10SP125-140		140	75KW
10SP125-160		160	93KW
10SP125-180		180	93KW
10SP160-20	160	20	13KW	233	250
10SP160-40		40	26KW
10SP160-60		60	37KW
10SP160-80		80	55KW
10SP160-100		100	63KW
10SP160-120		120	75KW
10SP160-140		140	93KW
10SP160-160		160	93KW
10SP160-180		180	110KW

Sigurnosne mjere opreza

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade of 380/50HZ, the use of other voltage grades of submersible motors need to be customized. The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious signs:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering is the same as the steering instructions. When the pump is upright, pay attention to safety, prevent overturning injury.

5, strogo u skladu s odredbama o podizanju pumpe, rasponu protoka upotrebe, kako bi se spriječio nizak protok ili visoka sila podizanja pumpe, potisni ležaj i drugi dijelovi trošenja, preopterećenje motora spaljeno

6, after the pump down the well, the measurement of the motor to the ground insulation resistance should not be less than 100M, after the start to observe the voltage and current, check the motor winding insulation, whether in line with the requirements; pump storage location temperature if less than freezing point, should be dry the motor cavity water, prevent the motor cavity water ice damage caused by low temperature.

Održavanje i održavanje

This product is a submersible pump. After installation, the insulation resistance and three-phase continuity should be rechecked to ensure the connection between the instrument and the starting equipment.If everything is normal, the machine can be tested. After starting, observe whether the readings of the instruments are correct. If the rated voltage and current beyond the nameplate, pay attention to whether the pump has noise or vibration.If everything is normal, it can be put into operation. After the first operation for four hours, the pump should be closed and the motor thermal insulation resistance test should be carried out quickly, and the value should not be less than 0.5 megaohm. After stopping the pump, it is necessary to restart it at an interval of five minutes to prevent the water column in the pipeline from completely reversing, causing excessive current and burning the motor. After normal operation, the power supply voltage, running current and insulation resistance should be checked regularly. If abnormal conditions are found, the machine should be stopped immediately to troubleshoot. When disassembling, it is necessary to untie the cable rope, remove the pipeline part, remove the line protection plate, and dry all the water in the motor cavity side by side. The disassembly sequence includes taking off the filter element, loosening the bolt of the coupling fixed to the motor shaft, unscrewing the bolt connecting the water inlet and the motor, separating the pump and the motor (pay attention to keeping the unit level when separating to avoid bending the pump shaft) and other steps. For motor disassembly, it is necessary to remove the nut, base, shaft head lock nut, thrust plate, key, lower guide, bearing seat, screw (pull rod screw), take out the rotor, and finally take out the connection part and upper guide bearing seat. When assembling the unit, it is necessary to clean the rust and dirt of each part, apply sealant and assemble in reverse order according to the disassembly. When running once a year or the operation time is less than one year but the immersion time is two years, it is necessary to disassemble and inspect in accordance with the provisions and replace the worn parts. Storage needs to empty the water in the motor cavity, pay attention to the anticorrosive wire mesh plate and tie the cable, stored in a room with a temperature below 40 DEG C and no corrosive substances and gases, and pay attention to rust prevention when not used for a long time.

Scenariji primjene

01 Zahvat dubokih bunara

02 Visokoprizemni vodovod

03 planinski vodovod

04 toranj voda

05 Poljoprivredno navodnjavanje

06 navodnjavanje vrta

07 riječni vodozahvat

08 domaća voda

Ako ste zainteresirani za naše proizvode, svoje podatke možete ostaviti ovdje, a mi ćemo vas uskoro kontaktirati.

Ovdje napišite svoju poruku i pošaljite nam je

srodni proizvoda