150QJB Latsaka Fantsakana Pompe

Manaova fanodinana OEM! Araka ny fepetra takian'ny mpampiasa, ny famolavolana sy ny fanamboarana karazana fepetra manokana tsy manara-penitra submersible maotera sy ny paompy. Ny fenitra fampiharana ny vokatra: GB / T2816-2014 "paompy submersible tsara", GB / T2818-2014 "motera asynchronous tsara submersible". WhatsApp: 17855846335

Mifandraisa amin'izay PDF DOWNLOAD

tsipiriany

Tags

Product Overview

The motor winding adopts special water-resistant wire for frequency conversion winding, which has excellent characteristics such as high frequency stamping resistance, pulse peak voltage stamping resistance and high temperature aging resistance. The frequency conversion winding design ensures the long-term stable conversion operation of the motor between 1HZ-50HZ, making the frequency conversion deep well pump more energy saving and longer service life.

Fepetra fampiasana

The product is supplied by three-phase AC 380V (tolerance ± 5%), 50HZ (tolerance ± 1%). Applicable water quality conditions include water temperature not exceeding 20 °C, solid impurities content (mass ratio) is not greater than 0.01%, PH value (pH) is 6.5-8.5, hydrogen sulfide content is not more than 1.5mg/L, chloride ion content is not more than 400mg/L. The motor adopts closed or water-filled wet structure. Before use, the internal chamber needs to be filled with clean water to prevent virtual filling. The pump needs to be completely immersed in water, the penetration depth shall not exceed 70m, and the distance from the bottom of the well shall not be less than 3m. The water inlet of the well shall meet the water output and continuous operation requirements of the pump, and the output of the pump shall be controlled at 0.7-1.2 times of the rated flow. The pump shall be used vertically, and the pump must be matched with the cable according to the requirements and equipped with external overload protection device. It is strictly prohibited to conduct no-load test of the pump, and it is necessary to avoid operation without water.

Modely dikany

MODELY	Fikoriana (m3/h)	LOHA (m)	Rotatingspeed(change/point)	Paompy rano(%)	fivoahan'ny savaivony (mm)	Azo ampiharina tsara savaivony (mm)	naoty hery (KW)	naoty malefaka (V)	naoty ankehitriny (A)	Fahombiazan'ny motera (%)	power factorcosφ	Unit Radial Habe ambony (mm)	fanamarihana
150QJ5-100	5	100	2850	58	40	150	3	380	7.9	74.0	0.78	143
150QJ5-150	5	150	2850	58	40	150 ambony	4	380	10.25	75.0	0.79	143
150QJ5-200		200					5.5		13.74	76.0	0.8
150QJ5-250		250					7.5		18.5	77.0	0.8
150QJ5-300		300					9.2		22.12	78.0	0.81
150QJ10-50	10	50	2850	63	50	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ10-66		66					4		10.25	75.0	0.79
150QJ10-78		78					4		10.25	75.0	0.79
150QJ10-84		84					5.5		13.74	76.0	0.8
150QJ10-91		91					5.5		13.74	76.0	0.8
150QJ10-100		100					5.5		13.74	76.0	0.8
150QJ10-128		128					7.5		18.5	77.0	0.8
150QJ10-150		150					7.5		18.5	77.0	0.8
150QJ10-200		200					11		26.28	78.5	0.81
150QJ10-250		250					13		30.87	79.0	0.81
150QJ10-300		300					15		35.62	79.0	0.81
150QJ15-33	15	33	2850	63	50	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ15-42		42					4		10.25	75.0	0.79
150QJ15-50		50					4		10.25	75.0	0.79
150QJ15-60		60					5.5		13.74	76	0.8
150QJ15-65		65					5.5		13.74	76.0	0.8
150QJ15-72		72					5.5		13.74	76.0	0.8
150QJ15-81		81					7.5		18.5	77.0	0.8
150QJ15-90		90					7.5		18.5	77.0	0.8
150QJ15-98		98					7.5		18.5	77.0	0.8
150QJ15-106		106					9.2		22.12	78.0	0.81
150QJ15-114		114					9.2		22.12	78.0	0.81
150QJ15-130		130					11		26.28	78.5	0.81
150QJ15-146		146					13		30.87	79.0	0.81
150QJ15-162		162					13		30.87	79.0	0.81
150QJ15-180		180					15		35.62	79.0	0.81
150QJ20-26	20	26	2850	64	50	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ20-33		33					3		7.9	74.0	0.78
150QJ20-39	20	39	2850	64	50	150AMBONY	4	380	10.25	75.0	0.79	143
150QJ20-52		52					5.5		13.74	76.0	0.8
150QJ20-65		65					7.5		18.5	77.0	0.8
150QJ20-78		78					7.5		18.5	77.0	0.8
150QJ20-91		91					9.2		22.12	78.0	0.81
150QJ20-98		98					9.2		22.12	78.0	0.81
150QJ20-104		104					11		26.28	78.5	0.81
150QJ20-111		111					11		26.28	78.5	0.81
150QJ20-130		130					13		30.87	79.0	0.81
150QJ20-143		143					13		30.87	79.0	0.81
150QJ20-156		156					15		35.62	79.0	0.81
150QJ20-182		182					18.5		43.12	79.5	0.82
150QJ25-24	25	24	2850	64	65	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ25-32		32					4		10.25	75.0	0.79
150QJ25-40		40					5.5		13.74	76.0	0.8
150QJ25-48		48					5.5		13.74	76.0	0.8
150QJ25-56		56					7.5		18.5	77.0	0.8
150QJ25-64		64					7.5		18.5	77.0	0.8
150QJ25-72		72					9.2		22.12	78.0	0.81
150QJ25-77		77					9.2		22.12	78.0	0.81
150QJ25-84		84					11		26.28	78.5	0.81
150QJ25-96		96					11		26.28	78.5	0.81
150QJ25-104		104					13		30.87	79.0	0.81
150QJ25-110		110					13		30.87	79.0	0.81
150QJ25-120		120					15		35.62	79.0	0.81
150QJ25-128		128					15		35.62	79.0	0.81
150QJ25-136		136					18.5		43.12	79.5	0.82
150QJ25-154		154					18.5		43.12	79.5	0.82
150QJ32-18	32	18	2850	66	80	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ32-24		24					4		10.25	75.0	0.79
150QJ32-30		30					5.5		13.74	76.0	0.8
150QJ32-36		36					5.5		13.74	76.0	0.8
150QJ32-42	32	42	2850	66	80	150AMBONY	7.5	380	18.5	77.0	0.8	143
150QJ32-54		54					9.2		22.12	78.0	0.81
150QJ32-66		66					11		26.28	78.5	0.81
150QJ32-72		72					13		30.87	79.0	0.81
150QJ32-84		84					13		30.87	79.0	0.81
150QJ32-90		90					15		35.62	79.0	0.81
150QJ32-96		96					15		35.62	79.0	0.81
150QJ32-114		114					18.5		43.12	79.5	0.82
150QJ40-16	40	16	2850	66	80	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ40-24		24					5.5		13.74	76.0	0.8
150QJ40-30		30					5.5		13.74	76.0	0.8
150QJ40-40		40					7.5		18.5	77.0	0.8
150QJ40-48		48					9.2		22.12	78.0	0.81
150QJ40-56		56					11		26.28	78.5	0.81
150QJ40-64		64					13		30.87	79.0	0.81
150QJ40-72		72					13		30.87	79.0	0.81
150QJ40-80		80					15		35.62	79.0	0.81
150QJ40-96		96					18.5		43.12	79.5	0.82
150QJ50-16	50	16	2850	65	80	150AMBONY	4	380	10.25	75.0	0.79	143
150QJ50-22		22					5.5		13.74	76.0	0.8
150QJ50-28		28					7.5		18.5	77.0	0.8
150QJ50-34		34					9.2		22.12	78.0	0.81
150QJ50-40		40					9.2		22.12	78.0	0.81
150QJ50-46		46					11		26.28	78.5	0.81
150QJ50-52		52					13		30.87	79.0	0.81
150QJ50-57		57					15		35.62	79.0	0.81
150QJ50-74		74					18.5		43.12	79.5	0.82
150QJ50-80		80					18.5		43.12	79.5	0.82
150QJ63-12	63	12	2850	60	80	150AMBONY	4	380	10.25	75.0	0.79	143
150QJ63-18		18					7.5		18.5	77.0	0.8
150QJ63-30		30					9.2		22.12	78.0	0.81
150QJ63-36		36					11		26.28	78.5	0.81
150QJ63-42	63	42	2850	60	80	150AMBONY	13	380	30.87	79.0	0.81	143
150QJ63-48		48					15		35.62	79.0	0.81
150QJ63-54		54					18.5		43.12	79.5	0.82
150QJ15-220	15	220	2850		50	150AMBONY	18.5	380	43.12			143
150QJ15-260		260					20		49.7
150QJ15-300		300					25		56.5
150QJ20-210	20	210	2850		50	150AMBONY	20	380	49.7			143
150QJ20-240		240					25		56.5
150QJ20-290		290					30		66.6
150QJ25-175	25	175	2850		65	150AMBONY	20		49.7			143
150QJ25-200		200					30		66.6
150QJ25-290		290					37		82.1
150QJ32-120	32	120	2850		80	150AMBONY	20	380	49.7			143
150QJ32-132		132					25		56.5
150QJ32-156		156					30		66.6
150QJ32-190		190					37		82.1
150QJ32-240		240					45		96.9
150QJ40-110	40	110	2850		80	150AMBONY	20	380	49.7			143
150QJ40-121		121					25		56.5
150QJ40-143		143					30		66.6
150QJ40-176		176					37		82.1
150QJ40-220		220					45		96.9
150QJ50-100	50	100	2850		80	150AMBONY	20	380	49.7			143
150QJ50-110		110					25		56.5
150QJ50-130		130					30		66.6
150QJ50-160		160					37		82.1
150QJ50-200		200					45		96.9

Fiarovana fiarovana

This well submersible pump is a pump suitable for clean water. It is strictly prohibited to pump sediment and turbid water in new wells. The voltage level of the pump is 380/50HZ. Other voltage levels of the submersible motor need to be customized. Underground cables must be waterproof and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have common motor comprehensive protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection, etc. Under abnormal circumstances, the protection device should be tripped in time. In the process of installation and use, the pump must be reliably grounded. It is prohibited to push and pull the switch when the hands and feet are wet. The power must be cut off before installation and maintenance of the pump. The place where the pump is used must set up a clear "anti-electric shock" mark. Before going down the well or installation, the motor must be filled with distilled water or non-corrosive cool water, and the water inlet and outlet screws must be tightened. When testing the pump, water must be injected into the pump chamber to lubricate the rubber bearings. The instant start shall not exceed one second to check whether the direction is correct. It is necessary to pay attention to the safety of the pump when it is erected to prevent it from toppling and hurting people. Strictly in accordance with the provisions of the pump lift and flow range of use, so as not to have a large flow in the low lift pump or a large pull in the high lift, causing extreme wear of thrust bearings and other components, resulting in motor overload burn. After the pump into the well, the measurement of the motor and ground insulation resistance, not less than 100M. After the start, regular observation of voltage and current, and check whether the motor winding insulation meets the requirements; if the pump storage location temperature is below freezing, storage should discharge the water in the motor cavity, to prevent the water in the motor cavity due to low temperature and freeze damage the motor.

Fampidirana ny Structure

Fampidirana fohifohy momba ny rafitra: ny ampahany amin'ny paompy dia ahitana ampahany amin'ny paompy, impeller, akorandriaka fingotra, fingotra fingotra, vatan'ny valizy (ampahany azo atao) ary singa hafa. Ny ampahany amin'ny maotera dia tena ahitana fototra, sarimihetsika mandrindra ny tsindry, tosika mitondra, takelaka fanosehana, seza mitondra seza ambany kokoa, stator, rotor, seza mitondra seza ambony, peratra fasika, fizarana rano, tariby ary singa hafa.

Ny tena mampiavaka ny vokatra dia ahitana:

1.The motor is a water-filled wet submersible three-phase asynchronous motor, the motor cavity is full of clean water, used to cool the motor and lubricate the bearing, the pressure regulating film at the bottom of the motor is used to adjust the expansion and contraction pressure difference of the water inside the body caused by the change of the temperature rise of the motor.

2.In order to prevent the sand in the well water from entering the motor, the upper end of the motor shaft is equipped with two oil seals, and a sand ring is installed to form a sand prevention structure.

3.In order to prevent the pump shaft from running up when starting, the pump shaft and the motor shaft are connected by a coupling, and an upper thrust bearing is installed at the lower part of the motor.

4.The lubrication of the motor and the pump bearing is water lubrication.

5.The motor stator winding is made of high quality submersible motor winding wire, with high insulation performance.

6.The pump is designed by computer CAD, with simple structure and good technical performance.

hametraka

(1) Fiomanana alohan'ny fametrahana:
1. Hamarino raha mahafeno ny fepetra fampiasana sy ny habaka voafaritra ao amin'ny boky ny paompy submersible.
2. Mampiasa obiect mavesatra miaraka amin'ny savaivony mitovy amin'ny savaivony ivelany ambony indrindra amin'ny paompy submersible, refeso raha mety hifanaraka amin'ny paompy submersible ny savaivony amin'ny lavaka fantsakana, ary refesina raha mahafeno ny fepetra takiana amin'ny fametrahana ny halaliny.
3. Hamarino raha madio ny lavaka fantsakana ary ny rano fantsakana dia feno rano. Aza mampiasa paompy elektrika azo atsoboka mihitsy mba hanasana ny fotaka sy ny rano fasika mba hisorohana ny fahasimbana aloha loatra amin'ny paompy elektrika.
4. Hamarino raha mety ny toerana misy ny clamp fametrahana welhead ary mahatanty ny kalitaon'ny vondrona manontolo.
5. Hamarino raha toa ka feno sy apetraka araka ny tokony ho izy ny singa ao amin'ny paompy submersible araka ny kisarisary ao amin'ny boky torolalana.
6. Esory ny visy ary fenoy rano madio tsy misy korontanina ny lavaky ny môtô (mariho. Ataovy azo antoka ny famenoana azy), ary henjana ny vy. Taorian'ny 12 ora ny tsindrona rano, ny insulation fanoherana ny maotera dia tsy tokony ho latsaky ny 150M Q rehefa refesina amin'ny 500V nihozongozona latabatra.
7. Ampifandraisina amin'ny tariby, tapaho ny tanany fingotra 120mm avy amin'ny tendrony iray amin'ny tariby mivoaka ary ny tariby mifanandrify amin'ny antsy elektrônika dia manozongozona ny halavan'ny tariby fototra telo amin'ny endrika mandroso, esory ny fotony varahina 20mm, kikisana ny oxide. sosona eo amin`ny ivelan`ny tariby varahina amin`ny antsy na fasika lamba, ary ampidiro ny roa mifamatotra tariby mifarana amin`ny palirs.Rehefa avy mamatotra ny sosona mafy amin`ny tariby varahina tsara, solder azy tsara sy mafy, ary fasika na inona na inona. burrs amin`ny ambonin`ny. Avy eo, ho an'ireo tonon-taolana telo, dia ampiasao ny kasety insulation polyvester mba hamehezana azy ireo amin'ny fomba semi stacked ho an'ny lavers telo. Apetaho mafy amin'ny kofehy nyion ny tendrony roa amin'ny sosona fanosotra, ary avy eo dia ampiasao fomba semi stacked mba hamehezana ny kasety ho an'ny sosona telo. Fonosy amin'ny kasety insulation tosidra ambony ho an'ny sosona telo ny outellayer. Farany, aforeto miaraka ireo kofehy telo ary avereno apetaho amin'ny kasety avo lenta. Ny sosona tsirairay dia tsy maintsy mifatotra mafy, ary ny interlayer tonon-taolana dia tsy maintsy ho mafy sy fimm mba hisorohana ny rano tsy hiditra sy hanimba ny insulation, Rehefa avy nofonosina, kobanina amin`ny rano amin`ny efitra mari-pana ny 20 'C nandritra ny 12 ora, ary refesina ny insulation fanoherana amin`ny mihozongozona latabatra. , izay tsy tokony ho latsaky ny 100M Ω

Toy izao manaraka izao ny diagrama fizotry ny fizotry ny tariby tariby mifamatotra:

8. Mampiasà multimeter mba hijerena raha mifandray ny tariby telo-dingana ary sao dia mifandanja ny fanoherana DC.
9. Jereo raha be loatra ny fahaizan'ny circuit sy ny transformer, ary ampifandraiso amin'ny fiatoana fiarovana na fitaovana fanombohana avy eo. Jereo ny tabilao 2 ho an'ny maodely manokana, ary avy eo dia arotsaho ao anaty paompy rano avy amin'ny fivoahan'ny paompy rano ny siny mba hanesorana ny fingotra ao amin'ny paompy, ary avy eo dia apetraho mitsangana sy miorim-paka ny paompy elektrika an-drano. ary jereo raha mifanaraka amin'ny famantarana ny familiana ny fitarihana. Raha tsy izany dia ampifamadiho ny mpampitohy roa amin'ny tariby misy dingana telo. Avy eo apetraho ny sivana ary miomàna hidina amin'ny fantsakana. Raha ampiasaina amin'ny fotoana manokana (toy ny tatatra, tatatra, renirano, dobo, dobo, sns.), Ny paompy elektrika dia tsy maintsy miorina tsara.

(2) Fametrahana fitaovana sy fitaovana:
1. Rojo fanandratana roa mihoatra ny roa taonina.
2. Tripod misy haavo mitsangana tsy latsaky ny efatra metatra.
3. Tady mihantona roa (tady tariby) izay mahazaka lanja mihoatra ny iray taonina (mahazaka ny lanjan'ny paompin-drano feno).
4. Mametraka clamp roa (splints).
5. Wrenches, tantanana, screwdrivers, fitaovana elektrika sy fitaovana, sns.

(3) Fametrahana paompy elektrika:
1. Ny sarin'ny fametrahana ny paompy elektrika an-tsokosoko dia aseho amin'ny sary 2. Ny refy fametrahana manokana dia aseho amin'ny tabilao 3 "Lisitry ny haben'ny fametrahana ny paompy elektrika azo ampiasaina".

2. Ny paompy elektrika azo atsoboka amin'ny lohany latsaky ny 30 metatra dia azo atsangana mivantana ao amin'ny fantsakana amin'ny fampiasana hoses sy tady tariby na tady hemp hafa izay mahazaka ny lanjan'ny milina iray manontolo, ny fantson-drano ary ny rano ao anaty fantsona.

3. Ny paompy manana loha mihoatra ny 30 metatra dia mampiasa fantsona vy, ary ny filaharan'ny fametrahana dia toy izao manaraka izao:
①Mampiasà clamp hanintonana ny tendrony ambony amin'ny ampahany amin'ny paompy rano (efa mifandray ny motera sy ny paompy rano amin'izao fotoana izao), atsangano amin'ny rojo mihantona, ary afehezo tsikelikely ao anaty lavaka fantsakana mandra-pametraka ny fametahana eo amin'ny lohan'ny fantsakana ary esory rojo mihantona.
② Mampiasà fametahana roa hafa hamehezana sodina, atsangano amin'ny rojo mihantona eo amin'ny 15 sm miala ny flange, ary ampidino tsikelikely. Eo anelanelan'ny flange pipe sy flange paompyApetraho eo amin'ny toerany ny pad fingotra ary henjana ny sodina ary paompy mitovy amin'ny bolt, voanjo ary mpanasa lohataona.
③ Asandrato kely ny paompin-drano, esory ny fametahana eo amin'ny tendrony ambony amin'ny paompy rano, afehezo mafy amin'ny fantsona plastika ny tariby, ary afehezo tsikelikely mandra-pametraka ny fametahana eo amin'ny lohan'ny fantsakana.
④Mampiasà fomba mitovy amin'ny famatorana ny fantsona rehetra ao anaty lavaka fantsakana.
⑤Rehefa mifandray amin'ny tariby fanaraha-maso ny tariby mitarika, dia mifandray amin'ny famatsiana herinaratra amin'ny dingana telo izany.

(4) Zavatra tokony homarihina mandritra ny fametrahana:
1. Raha toa ka misy trangan-javatra misy fitohanana hita mandritra ny fizotry ny paompy, atodiho na sintonina ny fantson-drano mba hialana amin'ny teboka mikorontana. Raha mbola tsy mandeha ny fepetra isan-karazany, azafadyAza terena hidina ny paompy mba hisorohana ny fahasimban'ny paompy elektrika sy ny fantsakana.
2. Mandritra ny fametrahana dia tokony hapetraka eo amin'ny sisin'ny sodina tsirairay ny pad fingotra ary hamafisina tsara.
3. Rehefa ampidinina ao anaty fantsakana ny paompy rano, dia tokony hapetraka eo afovoan'ny fantsakana izany mba hisorohana ny paompy tsy hianjera amin'ny rindrin'ny fantsakana mandritra ny fotoana maharitra, ka mahatonga ny paompy hihovitrovitra ary ny motera hifafa sy handoro. .
4. Farito ny halalin'ny paompin-drano mankany amin'ny fanambanin'ny fantsakana araka ny toetry ny fasika mikoriana sy ny fotaka. Aza alevina ao anaty fotaka ny paompy. Ny halaviran'ny paompin-drano mankany amin'ny fanambanin'ny fantsakana amin'ny ankapobeny dia tsy latsaky ny 3 metatra (jereo ny sary 2).
5. Ny halalin'ny rano miditra amin'ny paompy dia tsy tokony ho latsaky ny 1-1,5 metatra avy amin'ny haavon'ny rano mavitrika mankany amin'ny node fampidirana rano (jereo ny sary 2). Raha tsy izany dia mety ho simba mora foana ny paompy rano.
6. Tsy tokony ho ambany loatra ny fiakaran'ny paompy rano. Raha tsy izany, mila asiana valva vavahady eo amin'ny fantson-drano amin'ny lohan'ny fantsakana mba hifehezana ny fikorianan'ny paompy eo amin'ny toerana misy naoty mba hisorohana ny motera tsy ho be loatra sy ho may noho ny tahan'ny fikorianan'ny rivotra.
7. Rehefa mandeha ny paompy rano, ny fivoahan'ny rano dia tokony ho mitohy ary na dia, ny ankehitriny dia tokony ho marin-toerana (eo ambanin'ny fepetra miasa, amin'ny ankapobeny tsy mihoatra ny 10% ny naoty ankehitriny), ary tsy tokony hisy hovitrovitra na tabataba. Raha misy tsy mety dia tokony hajanona ny milina mba hahitana ny antony sy hanafoanana izany.
8. Rehefa mametraka, tandremo tsara ny fametrahana ny tariby fanodinkodinana maotera (jereo ny sary 2). Raha sodina vy ny fantsona rano, dia tariho avy amin'ny fantson-drano; rehefa fantsona plastika ny fantsona rano dia tariho avy amin'ny marika fototra amin'ny paompy elektrika.

Fikojakojana sy Fikojakojana

1.submersible pump installation is complete, re-check the insulation resistance and three-phase conduction from the switch, check the instrument and start the equipment connection error, if there is no problem, can start the trial, after the start of the instrument indicating readings whether more than the nameplate stipulated rated voltage and current, observe the pump noise and vibration phenomenon, everything is normal can be put into operation.

2.pump operation for the first four hours, should be shut down quickly test the thermal insulation resistance of the motor, the value should not be less than 0.5 megaohm.

3.pump shutdown, should be started after an interval of five minutes, to prevent the water column in the pipe has not completely reflux caused by excessive motor current and burnout.

4.pump into normal operation, in order to prolong its service life, to check the supply voltage, working current and insulation resistance is normal, if found the following situation, should immediately shut down troubleshooting.

1.in the rated condition, the current is more than20%.

2.dynamic water level to the water inlet section, causing intermittent water.

3.submersible pump severe vibration or noise.

4.supply voltage is lower than 340 volts.

5.fuse burned out a phase.

6.water pipe damage.

7.motor to the thermal insulation resistance is less than 0.5 megaohm. 5. The product is a pump unit with easy disassembly function, with simple steps of disassembly, so that users can easily maintain and clean. The disassembly steps include unraveling the cable rope, taking down the pipeline part and the line protection plate, unloosening the water discharge bolt, excluding all the water in the motor chamber, removing the filter and loosening the coupling fixing screw fixing the motor shaft, unscrewing the bolt connecting the water inlet section and the motor, separating the pump and the motor (note that the unit should be leveled when separating to prevent the bending of the pump shaft), the disassembly sequence of the pump is: water inlet section, impeller, shunt shell, impeller, and cleaning the valve body. When disassembling the impeller, use special tools to loosen the conical sleeve fixing the impeller. In the whole disassembly process, avoid bending the pump shaft and damaging various parts. The disassembly process of the motor is: put the motor on the platform, and remove the nuts, base, shaft head lock nut, thrust plate, key, and lower guide rail from the bottom of the motor in order. Bearing seat, tie rod bolt, and then take out the rotor (be careful not to damage the wiring harness) and finally remove the connecting section and the upper guide bearing seat. Before assembling the unit, the rust and dirt of each part should be cleaned, and the sealant should be coated on each mating surface and fastener, and then the assembly should be carried out in reverse order according to the disassembly (the movement of the motor shaft after assembly is about 1 mm). After the assembly is completed, the coupling should be flexibly rotated, and then the filter should be put on for machine test. This pump unit is not only convenient and easy to use, but also has detailed instructions, which provides users with convenient maintenance experience. 6. Submersible electric pump every operation for one year, or less than one year but the diving time has reached two years, should be put out of the well according to Article 5 for disassembly and maintenance, and replace the worn parts.

Fitehirizana sy fitandremana

1, esory ny rano ao amin'ny lavaka maotera (indrindra amin'ny ririnina mba hisorohana ny motera tsy hivaingana), ary afehezo tsara ny tariby.

2, tehirizo ao anaty efitrano anatiny tsy misy akora sy entona manimba, miaraka amin'ny mari-pana ambany 40 °C.

3, ny fampiasana maharitra dia tokony handinika ny fisorohana ny harafesina amin'ny paompy submersible.

Mitafy Parts