QJ series submersible pump is a kind of water lifting equipment directly connected to the submersible motor and pump to work in the water. This series of pumps are vertical, with small use area, compact structure, simple installation, convenient maintenance and repair. It is widely used in agricultural irrigation, municipal engineering, water conservancy engineering, urban water supply and drainage, industrial and mining enterprises water supply and drainage, drought relief and flood relief and so on. The flow range is 5-500m3/h, the head is 4-800m, and the power is 3-315KW. This product has stable and reliable performance, can meet the needs of various different uses of pumps, and is one of the excellent choices in the market.
This product is a three-phase AC 380V electric pump, suitable for various pump applications. The power supply requirements for ± 5% of the three-phase AC 380V voltage, 50HZ frequency fluctuation range of ± 1%. Water quality requirements include water temperature not higher than 20 °C, solid impurities content (mass ratio) is not greater than 0.01%, PH value of 6.5-8.5, hydrogen sulfide content is not greater than 1.5mg/L, chloride ion content is not greater than 400mg/L. The motor adopts a closed or water injection wet structure, before use must be submersible motor inner cavity filled with clean water to prevent empty, while fastening the water injection and pressure relief bolts, otherwise not to use. Submersible pump must be completely immersed in water work, immersion depth shall not exceed 70 meters, the distance from the bottom of the pump to the bottom of the well shall not be less than 3 meters. Well water inflow shall meet the water output and continuous operation requirements of submersible pump, pump output shall be controlled at 0.7-1.2 times the rated flow. The well must be vertical, submersible pump can not be used horizontally or tilted, only vertical use. Submersible pump must be equipped with cables as required, and equipped with external overload protection device. It is strictly prohibited to do no-load test without water.
| MODELY | Fikoriana (m3/h) | LOHA (m) |
Rotatingspeed(change/point) | Paompy rano(%) | fivoahan'ny savaivony (mm) |
Azo ampiharina tsara savaivony (mm) |
naoty power(KW） |
naoty malefaka (V) |
naoty ankehitriny (A) |
Fahombiazan'ny motera (%) | power factorcosφ | Unit Radial Habe ambony (mm) |
|||||||||
| 175QJ10-42 | 10 | 42 | 2850 | 53 | 50 | 175AMBONY | 3 | 380 | 7.8 | 74.0 | 0.79 | 168 | |||||||||
| 175QJ10-56 | 56 | 4 | 10.1 | 76.0 | 0.79 | ||||||||||||||||
| 175QJ10-70 | 70 | 4 | 10.1 | 76.0 | 0.79 | ||||||||||||||||
| 175QJ10-84 | 84 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ10-112 | 112 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ10-126 | 126 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ10-140 | 140 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ15-42 | 15 | 42 | 2850 | 58 | 50 | 175AMBONY | 4 | 380 | 10.1 | 76.0 | 0.79 | 168 | |||||||||
| 175QJ15-55 | 55 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ15-65 | 65 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ15-85 | 85 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ15-112 | 112 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ20-26 | 20 | 26 | 2850 | 64 | 50 | 175AMBONY | 3 | 380 | 7.8 | 74.0 | 0.79 | 168 | |||||||||
| 175QJ20-39 | 39 | 4 | 10.1 | 76.0 | 0.79 | ||||||||||||||||
| 175QJ20-52 | 52 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ20-78 | 78 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ20-91 | 91 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ20-104 | 104 | 11 | 26.1 | 79.0 | 0.81 | ||||||||||||||||
| 175QJ20-130 | 130 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ20-156 | 156 | 15 | 34.7 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ20-182 | 187 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ20-208 | 208 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ20-247 | 247 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ20-273 | 273 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ20-299 | 299 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ20-325 | 325 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ20-364 | 364 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ25-26 | 25 | 26 | 2850 | 66 | 65 | 175AMBONY | 3 | 380 | 7.8 | 74.0 | 0.79 | 168 | |||||||||
| 175QJ25-39 | 39 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ25-65 | 25 | 65 | 2850 | 66 | 65 | 175AMBONY | 7.5 | 380 | 18.4 | 77.5 | 0.8 | 168 | |||||||||
| 175QJ25-78 | 78 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ25-91 | 91 | 11 | 26.1 | 79.0 | 0.81 | ||||||||||||||||
| 175QJ25-104 | 104 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ25-130 | 130 | 15 | 34.7 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ25-156 | 156 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ25-182 | 182 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ25-208 | 208 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ25-221 | 221 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ25-247 | 247 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ25-260 | 260 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ25-299 | 299 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ30-30 | 30 | 30 | 2850 | 67 | 80 | 175AMBONY | 4 | 380 | 10.1 | 76.0 | 0.79 | 168 | |||||||||
| 175QJ30-40 | 40 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ32-24 | 32 | 24 | 2850 | 67 | 80 | 175AMBONY | 4 | 380 | 10.1 | 76.0 | 0.79 | 168 | |||||||||
| 175QJ32-36 | 36 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ32-48 | 48 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ32-60 | 60 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ32-72 | 72 | 11 | 26.1 | 79.0 | 0.81 | ||||||||||||||||
| 175QJ32-84 | 84 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ32-96 | 96 | 15 | 34.7 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ32-120 | 120 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ32-144 | 144 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ32-168 | 168 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ32-180 | 180 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ32-192 | 192 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ32-204 | 204 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ32-240 | 240 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ35-60 | 35 | 60 | 2850 | 67 | 80 | 175AMBONY | 10 | 380 | 25.0 | 78.0 | 0.78 | 168 | |||||||||
| 175QJ35-75 | 75 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ35-100 | 100 | 17 | 40.9 | 80.0 | 0.79 | ||||||||||||||||
| 175QJ40-24 | 40 | 24 | 2850 | 70 | 80 | 175AMBONY | 5.5 | 380 | 13.6 | 77.0 | 0.8 | 168 | |||||||||
| 175QJ40-30 | 30 | 5.5 | 13.6 | 77.0 | 0.8 | ||||||||||||||||
| 175QJ40-36 | 36 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ40-48 | 48 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ40-60 | 60 | 11 | 26.1 | 79.0 | 0.81 | ||||||||||||||||
| 175QJ40-72 | 72 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ40-84 | 84 | 15 | 34.7 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ40-96 | 96 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ40-120 | 120 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ40-132 | 132 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ40-144 | 144 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ40-156 | 156 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ40-168 | 168 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ40-192 | 192 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ50-24 | 50 | 24 | 2850 | 72 | 80 | 175AMBONY | 5.5 | 380 | 13.6 | 77.0 | 0.8 | 168 | |||||||||
| 175QJ50-36 | 36 | 9.2 | 22.1 | 78.0 | 0.81 | ||||||||||||||||
| 175QJ50-48 | 48 | 11 | 26.1 | 79.0 | 0.81 | ||||||||||||||||
| 175QJ50-60 | 60 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ50-70 | 70 | 17 | 40.9 | 80.0 | 0.79 | ||||||||||||||||
| 175QJ50-84 | 84 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ50-96 | 96 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ50-108 | 108 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ50-120 | 120 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ50-132 | 132 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ50-144 | 144 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ50-156 | 156 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ63-22 | 63 | 22 | 2850 | 72 | 80 | 175AMBONY | 7.5 | 380 | 18.4 | 77.5 | 0.8 | 168 | |||||||||
| 175QJ63-44 | 44 | 13 | 30.1 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ63-55 | 55 | 15 | 34.7 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ63-66 | 66 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ63-77 | 77 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ63-88 | 88 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ63-99 | 63 | 99 | 2850 | 72 | 80 | 175AMBONY | 30 | 380 | 66.6 | 81.5 | 0.84 | 168 | |||||||||
| 175QJ63-110 | 110 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ63-132 | 132 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ80-9 | 80 | 9 | 2850 | 73 | 100 | 175AMBONY | 4 | 380 | 10.1 | 76.0 | 0.79 | 168 | |||||||||
| 175QJ80-18 | 18 | 7.5 | 18.4 | 77.5 | 0.8 | ||||||||||||||||
| 175QJ80-27 | 27 | 11 | 26.1 | 79.0 | 0.81 | ||||||||||||||||
| 175QJ80-36 | 36 | 15 | 34.7 | 80.0 | 0.82 | ||||||||||||||||
| 175QJ80-45 | 45 | 18.5 | 42.6 | 80.5 | 0.82 | ||||||||||||||||
| 175QJ80-54 | 54 | 22 | 49.7 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ80-63 | 63 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ80-72 | 72 | 25 | 56.5 | 81.0 | 0.83 | ||||||||||||||||
| 175QJ80-81 | 81 | 30 | 66.6 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ80-90 | 90 | 32 | 71.0 | 81.5 | 0.84 | ||||||||||||||||
| 175QJ80-98 | 98 | 37 | 82.1 | 81.5 | 0.84 | ||||||||||||||||
1, tsara submersible paompy ho an'ny rano madio paompy, mandrara ny hanasa fantsakana vaovao, paompy antsanga sy rano fotaka,
2, well water pump voltage grade of 380/50HZ, the use of other voltage grades of submersible motors need to be customized. The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have common motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.
3, the pump must be reliably grounded in the process of installation and use. Prohibit push and pull switch in the case of wet hands and feet. Must cut off the power supply before installation and maintenance of electric pumps. Must install "electric shock prevention" obvious mark in the place where the pump is used. Before going down the well or installation, the motor cavity must be filled with distilled water or non-corrosive clean cold water, and must tighten the water inlet / outlet bolts.
4, when the pump is tested on the ground, water must be added to the pump cavity to lubricate the rubber bearing. The instantaneous start can not exceed one second, check whether the direction is the same as the direction indicated. When the pump is placed vertically, pay attention to safety to prevent overturning and injury.
5, hentitra araka ny fepetra ny paompy fanandratana, mikoriana isan-karazany ny fampiasana, mba hisorohana ny fikorianan'ny ambany na ny fiakarana avo pumping hery, ny fanosehana mitondra sy ny ampahany hafa amin'ny fitafy, ny maotera be loatra may.
6, aorian'ny paompy midina ny fantsakana, ny fandrefesana ny maotera mankany amin'ny fanoherana ny insulation amin'ny tany dia tsy tokony ho latsaky ny 100M, aorian'ny fanombohana ny fanaraha-maso ny voltase sy ny ankehitriny, jereo ny insulation miolikolika maotera, na mifanaraka amin'ny fepetra takiana; paompy toerana fitehirizana mari-pana raha kely noho ny toerana mangatsiatsiaka, dia tokony ho maina ny rano ao amin'ny maotera lavaka, hisorohana ny maotera lavaka ranomandry fahasimbana vokatry ny mari-pana ambany.
The pump part is mainly composed of pump shaft, impeller, guide housing, rubber bearing, check valve body (optional) and other parts. The motor part is mainly composed of base, pressure regulating diaphragm, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand discharging ring, water inlet section, lead cable and other parts.
Ny tena mampiavaka ny vokatra dia ahitana:
- 1.The motor is a water-immersed wet three-phase asynchronous motor, and the motor cavity is filled with water to cool the motor and lubricate the bearing. The pressure regulating diaphragm at the bottom of the motor is used to adjust the expansion-contraction pressure difference inside and outside the body caused by the change of the motor's temperature rise.
- 2. In order to prevent the sand in the well water from entering the motor, two oil seals are installed on the upper end of the motor shaft extension, and a sand discharging ring is installed to form a sand discharging structure.
- 3. In order to prevent the pump shaft from jumping when starting, the pump shaft and the motor shaft are connected together through a coupling, and a thrust bearing is installed under the motor.
- 4. The motor and pump bearing are lubricated by water.
- 5. The motor stator winding is made of high-quality submersible motor winding wire, with high insulation performance.
- 6. The pump is designed by computer CAD, with simple structure and excellent technical performance.
(1) Fiomanana alohan'ny fametrahana:
1. Hamarino raha mahafeno ny fepetra fampiasana sy ny habaka voafaritra ao amin'ny boky ny paompy submersible.
2. Mampiasa obiect mavesatra miaraka amin'ny savaivony mitovy amin'ny savaivony ivelany ambony indrindra amin'ny paompy submersible, refeso raha mety hifanaraka amin'ny paompy submersible ny savaivony amin'ny lavaka fantsakana, ary refesina raha mahafeno ny fepetra takiana amin'ny fametrahana ny halaliny.
3. Hamarino raha madio ny lavaka fantsakana ary ny rano fantsakana dia feno rano. Aza mampiasa paompy elektrika azo atsoboka mihitsy mba hanasana ny fotaka sy ny rano fasika mba hisorohana ny fahasimbana aloha loatra amin'ny paompy elektrika.
4. Hamarino raha mety ny toerana misy ny clamp fametrahana welhead ary mahatanty ny kalitaon'ny vondrona manontolo.
5. Hamarino raha toa ka feno sy apetraka araka ny tokony ho izy ny singa ao amin'ny paompy submersible araka ny kisarisary ao amin'ny boky torolalana.
6. Esory ny visy ary fenoy rano madio tsy misy korontanina ny lavaky ny môtô (mariho. Ataovy azo antoka ny famenoana azy), ary henjana ny vy. Taorian'ny 12 ora ny tsindrona rano, ny insulation fanoherana ny maotera dia tsy tokony ho latsaky ny 150M Q rehefa refesina amin'ny 500V nihozongozona latabatra.
7. Ampifandraisina amin'ny tariby, tapaho ny tanany fingotra 120mm avy amin'ny tendrony iray amin'ny tariby mivoaka ary ny tariby mifanandrify amin'ny antsy elektrônika dia manozongozona ny halavan'ny tariby fototra telo amin'ny endrika mandroso, esory ny fotony varahina 20mm, kikisana ny oxide. sosona eo amin`ny ivelan`ny tariby varahina amin`ny antsy na fasika lamba, ary ampidiro ny roa mifamatotra tariby mifarana amin`ny palirs.Rehefa avy mamatotra ny sosona mafy amin`ny tariby varahina tsara, solder azy tsara sy mafy, ary fasika na inona na inona. burrs amin`ny ambonin`ny. Avy eo, ho an'ireo tonon-taolana telo, dia ampiasao ny kasety insulation polyvester mba hamehezana azy ireo amin'ny fomba semi stacked ho an'ny lavers telo. Apetaho mafy amin'ny kofehy nyion ny tendrony roa amin'ny sosona fanosotra, ary avy eo dia ampiasao fomba semi stacked mba hamehezana ny kasety ho an'ny sosona telo. Fonosy amin'ny kasety insulation tosidra ambony ho an'ny sosona telo ny outellayer. Farany, aforeto miaraka ireo kofehy telo ary avereno apetaho amin'ny kasety avo lenta. Ny sosona tsirairay dia tsy maintsy mifatotra mafy, ary ny interlayer tonon-taolana dia tsy maintsy ho mafy sy fimm mba hisorohana ny rano tsy hiditra sy hanimba ny insulation, Rehefa avy nofonosina, kobanina amin`ny rano amin`ny efitra mari-pana ny 20 'C nandritra ny 12 ora, ary refesina ny insulation fanoherana amin`ny mihozongozona latabatra. , izay tsy tokony ho latsaky ny 100M Ω
Toy izao manaraka izao ny diagrama fizotry ny fizotry ny tariby tariby mifamatotra:
8. Mampiasà multimeter mba hijerena raha mifandray ny tariby telo-dingana ary sao dia mifandanja ny fanoherana DC.
9. Jereo raha be loatra ny fahaizan'ny circuit sy ny transformer, ary ampifandraiso amin'ny fiatoana fiarovana na fitaovana fanombohana avy eo. Jereo ny tabilao 2 ho an'ny maodely manokana, ary avy eo dia arotsaho ao anaty paompy rano avy amin'ny fivoahan'ny paompy rano ny siny mba hanesorana ny fingotra ao amin'ny paompy, ary avy eo dia apetraho mitsangana sy miorim-paka ny paompy elektrika an-drano. ary jereo raha mifanaraka amin'ny famantarana ny familiana ny fitarihana. Raha tsy izany dia ampifamadiho ny mpampitohy roa amin'ny tariby misy dingana telo. Avy eo apetraho ny sivana ary miomàna hidina amin'ny fantsakana. Raha ampiasaina amin'ny fotoana manokana (toy ny tatatra, tatatra, renirano, dobo, dobo, sns.), Ny paompy elektrika dia tsy maintsy miorina tsara.
(2) Fametrahana fitaovana sy fitaovana:
1. Rojo fanandratana roa mihoatra ny roa taonina.
2. Tripod misy haavo mitsangana tsy latsaky ny efatra metatra.
3. Tady mihantona roa (tady tariby) izay mahazaka lanja mihoatra ny iray taonina (mahazaka ny lanjan'ny paompin-drano feno).
4. Mametraka clamp roa (splints).
5. Wrenches, tantanana, screwdrivers, fitaovana elektrika sy fitaovana, sns.
(3) Fametrahana paompy elektrika:
1. Ny sarin'ny fametrahana ny paompy elektrika an-tsokosoko dia aseho amin'ny sary 2. Ny refy fametrahana manokana dia aseho amin'ny tabilao 3 "Lisitry ny haben'ny fametrahana ny paompy elektrika azo ampiasaina".
2. Ny paompy elektrika azo atsoboka amin'ny lohany latsaky ny 30 metatra dia azo atsangana mivantana ao amin'ny fantsakana amin'ny fampiasana hoses sy tady tariby na tady hemp hafa izay mahazaka ny lanjan'ny milina iray manontolo, ny fantson-drano ary ny rano ao anaty fantsona.
3. Ny paompy manana loha mihoatra ny 30 metatra dia mampiasa fantsona vy, ary ny filaharan'ny fametrahana dia toy izao manaraka izao:
①Mampiasà clamp hanintonana ny tendrony ambony amin'ny ampahany amin'ny paompy rano (efa mifandray ny motera sy ny paompy rano amin'izao fotoana izao), atsangano amin'ny rojo mihantona, ary afehezo tsikelikely ao anaty lavaka fantsakana mandra-pametraka ny fametahana eo amin'ny lohan'ny fantsakana ary esory rojo mihantona.
② Mampiasà fametahana roa hafa hamehezana sodina, atsangano amin'ny rojo mihantona eo amin'ny 15 sm miala ny flange, ary ampidino tsikelikely. Eo anelanelan'ny flange pipe sy flange paompyApetraho eo amin'ny toerany ny pad fingotra ary henjana ny sodina ary paompy mitovy amin'ny bolt, voanjo ary mpanasa lohataona.
③ Asandrato kely ny paompin-drano, esory ny fametahana eo amin'ny tendrony ambony amin'ny paompy rano, afehezo mafy amin'ny fantsona plastika ny tariby, ary afehezo tsikelikely mandra-pametraka ny fametahana eo amin'ny lohan'ny fantsakana.
④Mampiasà fomba mitovy amin'ny famatorana ny fantsona rehetra ao anaty lavaka fantsakana.
⑤Rehefa mifandray amin'ny tariby fanaraha-maso ny tariby mitarika, dia mifandray amin'ny famatsiana herinaratra amin'ny dingana telo izany.
(4) Zavatra tokony homarihina mandritra ny fametrahana:
1. Raha toa ka misy trangan-javatra misy fitohanana hita mandritra ny fizotry ny paompy, atodiho na sintonina ny fantson-drano mba hialana amin'ny teboka mikorontana. Raha mbola tsy mandeha ny fepetra isan-karazany, azafadyAza terena hidina ny paompy mba hisorohana ny fahasimban'ny paompy elektrika sy ny fantsakana.
2. Mandritra ny fametrahana dia tokony hapetraka eo amin'ny sisin'ny sodina tsirairay ny pad fingotra ary hamafisina tsara.
3. Rehefa ampidinina ao anaty fantsakana ny paompy rano, dia tokony hapetraka eo afovoan'ny fantsakana izany mba hisorohana ny paompy tsy hianjera amin'ny rindrin'ny fantsakana mandritra ny fotoana maharitra, ka mahatonga ny paompy hihovitrovitra ary ny motera hifafa sy handoro. .
4. Farito ny halalin'ny paompin-drano mankany amin'ny fanambanin'ny fantsakana araka ny toetry ny fasika mikoriana sy ny fotaka. Aza alevina ao anaty fotaka ny paompy. Ny halaviran'ny paompin-drano mankany amin'ny fanambanin'ny fantsakana amin'ny ankapobeny dia tsy latsaky ny 3 metatra (jereo ny sary 2).
5. Ny halalin'ny rano miditra amin'ny paompy dia tsy tokony ho latsaky ny 1-1,5 metatra avy amin'ny haavon'ny rano mavitrika mankany amin'ny node fampidirana rano (jereo ny sary 2). Raha tsy izany dia mety ho simba mora foana ny paompy rano.
6. Tsy tokony ho ambany loatra ny fiakaran'ny paompy rano. Raha tsy izany, mila asiana valva vavahady eo amin'ny fantson-drano amin'ny lohan'ny fantsakana mba hifehezana ny fikorianan'ny paompy eo amin'ny toerana misy naoty mba hisorohana ny motera tsy ho be loatra sy ho may noho ny tahan'ny fikorianan'ny rivotra.
7. Rehefa mandeha ny paompy rano, ny fivoahan'ny rano dia tokony ho mitohy ary na dia, ny ankehitriny dia tokony ho marin-toerana (eo ambanin'ny fepetra miasa, amin'ny ankapobeny tsy mihoatra ny 10% ny naoty ankehitriny), ary tsy tokony hisy hovitrovitra na tabataba. Raha misy tsy mety dia tokony hajanona ny milina mba hahitana ny antony sy hanafoanana izany.
8. Rehefa mametraka, tandremo tsara ny fametrahana ny tariby fanodinkodinana maotera (jereo ny sary 2). Raha sodina vy ny fantsona rano, dia tariho avy amin'ny fantson-drano; rehefa fantsona plastika ny fantsona rano dia tariho avy amin'ny marika fototra amin'ny paompy elektrika.
（1）submersible pump installation is complete, re-check the insulation resistance and three-phase conduction from the switch, check the instrument and start the equipment connection error, if there is no problem, can start the trial, after the start of the instrument indicating readings whether more than the nameplate stipulated rated voltage and current, observe the pump noise and vibration phenomenon, everything is normal can be put into operation.
（2）pump operation for the first four hours, should be shut down quickly test the thermal insulation resistance of the motor, the value should not be less than 0.5 megaohm.
（3）pump shutdown, should be started after an interval of five minutes, to prevent the water column in the pipe has not completely reflux caused by excessive motor current and burnout.
（4）pump into normal operation,in order to prolong its service life, to check the supply voltage, working current and insulation resistance is normal, if found the following situation, should immediately shut down troubleshooting.
1 amin'ny fepetra nomena, ny ankehitriny dia mihoatra ny 20%.
2 ny haavon'ny rano mavitrika mankany amin'ny faritra fidirana amin'ny rano, miteraka rano miato.
3 submersible paompy hovitrovitra na tabataba mafy.
4 famatsiana malefaka dia ambany noho ny 340 volts.
5 fuse nandoro dingana iray.
Fahasimban'ny fantsona rano 6.
7 maotera amin'ny fanoherana ny insulation mafana dia latsaky ny 0.5 megaohm.
(5)This product is a portable water pump, with the characteristics of easy disassembly, the user can disassemble and clean the various components according to the following steps to maintain the normal operation of the pump. First of all to untie the cable tie, remove the pipeline part and take off the line protection plate. Then unscrew the drain bolt, discharge all the water in the motor chamber. Then take off the filter, loosen the fixing screw on the coupling fixed motor shaft. Then unscrew the bolt connecting the water inlet section and the motor, the pump and the motor separation (pay attention to the device leveling when separating, to prevent the bending of the pump shaft). The sequence of disassembly of the pump is: water inlet section, impeller, guide housing, impeller, check valve body. When disassembling the impeller, use special tools to loosen the cone sleeve fixed the impeller. In the whole disassembly process, pay attention to avoid bending the pump shaft and damage various parts. The steps of motor disassembly are: put the motor on the platform, remove the nut, seat, shaft head lock nut, thrust plate, key, lower guide rail from the bottom in order (tie rod bolt), then remove the rotor (pay attention not to damage the wire packet), and finally remove the connecting section and the upper guide bearing seat. Before assembly, the rust and dirt of each part should be cleaned, and sealant should be applied to each mating surface and fastener, and then the assembly should be carried out in the opposite order of disassembly (the movement of the motor shaft after assembly is about 1 mm). After assembly, the coupling should be flexible, and then the filter should be put on for machine test. 6. Submersible electric pump should be taken out of the well for dismantling and maintenance according to Article 5 after operating for one year, or less than one year, but the diving time has reached two years, and the worn parts should be replaced.
1, esory ny rano ao amin'ny lavaka maotera (indrindra amin'ny ririnina mba hisorohana ny motera tsy hivaingana), ary afehezo tsara ny tariby.
2, tehirizo ao anaty efitrano anatiny tsy misy akora sy entona manimba, miaraka amin'ny mari-pana ambany 40 °C.
3, ny fampiasana maharitra dia tokony handinika ny fisorohana ny harafesina amin'ny paompy submersible.
- Impeller
- Shaft tanany
- Fingotra tanany
-
Peratra famehezana
01 Fantsakana rano lalina
02 Famatsiana rano avo
03 famatsiana rano an-tendrombohitra
04 rano tilikambo
05 Fanondrahana fambolena
06 fanondrahana zaridaina
07 rano fisotro madio
08 rano ao an-trano
Malgashi 
English 
Afrikaans 
Albanian 
Amharic 
Arabic 
Armenian 
Azerbaijani 
Basque 
Belarusian 
Bengali 
Bosnian 
Bulgarian 
Catalan 
Cebuano 
Corsican 
Croatian 
Czech 
Danish 
Dutch 
Esperanto 
Estonian 
Finnish 
French 
Frisian 
Galician 
Georgian 
German 
Greek 
Gujarati 
Haitian Creole 
Hausa 
Hawaiian 
Hebrew 
Hindi 
Miao 
Hungarian 
Icelandic 
Igbo 
Indonesian 
Irish 
Italian 
Japanese 
Javanese 
Kannada 
Kazakh 
Khmer 
Rwandese 
Korean 
Kurdish 
Kyrgyz 
Lao 
Latin 
Latvian 
Lithuanian 
Luxembourgish 
Macedonian 
Malay 
Malayalam 
Maltese 
Maori 
Marathi 
Mongolian 
Myanmar 
Nepali 
Norwegian 
Norwegian 
Occitan 
Pashto 
Persian 
Polish 
Portuguese 
Punjabi 
Romanian 
Russian 
Samoan 
Scottish Gaelic 
Serbian 
Sesotho 
Shona 
Sindhi 
Sinhala 
Slovak 
Slovenian 
Somali 
Spanish 
Sundanese 
Swahili 
Swedish 
Tagalog 
Tajik 
Tamil 
Tatar 
Telugu 
Thai 
Turkish 
Turkmen 
Ukrainian 
Urdu 
Uighur 
Uzbek 
Vietnamese 
Welsh 
Bantu 
Yiddish 
Yoruba 
Zulu