150QJ Paa Ruku Wai Hohonu

Whakahaerehia te tukatuka OEM! E ai ki nga whakaritenga a te kaiwhakamahi, te hoahoa me te hanga i nga momo momo whakaritenga motuhake o te motuka ruuma kore-paerewa me te papu. Ko nga paerewa whakatinanatanga hua: GB / T2816-2014 "paa pai ruku", GB / T2818-2014 "motika tukutahi pai". WhatsApp: 17855846335

WHAKAPAKI NEI PDF DOWNLOAD

Nga korero

Tohu

Tirohanga Hua

QJ series submersible electric pump is a kind of lifting machine directly connected to the submersible motor and pump to work in the water. This series of pumps are vertical, with small footprint, compact structure, simple installation, easy maintenance and repair. It is widely used in agricultural irrigation, municipal engineering, water conservancy, urban water supply and drainage, as well as industrial and mining enterprises, disaster relief drainage and other fields. The flow range is 5-500m3/h, the head is 4-800m, and the power is 3-315KW. This submersible electric pump can efficiently lift and transport water, providing reliable water supply protection for various fields. Its stable performance and solid structure make it an indispensable machine in various water conservancy projects.

Nga Tikanga Whakamahi

This product is a three-phase AC 380V (tolerance ± 5%), 50HZ (tolerance ± 1%) power supply pump, is designed for water requirements of strict occasions. The product is suitable for water temperature not exceeding 20 °C, solid impurities content (mass ratio) is not greater than 0.01%, PH value (pH) is 6.5-8.5, hydrogen sulfide content is not greater than 1.5mg/L, chloride ion content is not greater than 400mg/L water quality environment. The pump adopts closed or water-filled wet structure motor, the inner cavity must be filled with clean water before use to prevent virtual filling, and then tighten the water injection and pressure relief bolts. The product shall be completely immersed in water, the penetration depth shall not exceed 70m, and the distance from the bottom of the well shall not be less than 3m. The water source required by the pump shall be able to meet its output demand and continuous operation, and the output of the pump shall be controlled at 0.7-1.2 times of the rated flow. The well shall be vertical, and the horizontal or inclined use shall be prohibited, and the cable shall be matched according to the requirements and equipped with external overload protection device. It is strictly prohibited to conduct no water test on the electric pump.

Tauira Tikanga

Read More About deep water well pump

Tohutoro Wahi Tauira

Tauira	Rere (m3/h)	Upoko (m)	Tere hurihuri (hurihia/tohu)	Puma wai(%)	Putanga diameter (mm)	E tika ana diameter(mm)	Whakatauria mana(KW)	Whakatauria ngaohiko(V)	Whakatauria nāianei(A)	Te Motika (%)	tauwehe hikoφ	Waeine Rahi Morahi Radial(mm)	Korero
150QJ5-100	5	100	2850	58	40	150	3	380	7.9	74.0	0.78	143
150QJ5-150	5	150	2850	58	40	150i runga ake	4	380	10.25	75.0	0.79	143
150QJ5-200		200					5.5		13.74	76.0	0.8
150QJ5-250		250					7.5		18.5	77.0	0.8
150QJ5-300		300					9.2		22.12	78.0	0.81
150QJ10-50	10	50	2850	63	50	150runga	3	380	7.9	74.0	0.78	143
150QJ10-66		66					4		10.25	75.0	0.79
150QJ10-78		78					4		10.25	75.0	0.79
150QJ10-84		84					5.5		13.74	76.0	0.8
150QJ10-91		91					5.5		13.74	76.0	0.8
150QJ10-100		100					5.5		13.74	76.0	0.8
150QJ10-128		128					7.5		18.5	77.0	0.8
150QJ10-150		150					7.5		18.5	77.0	0.8
150QJ10-200		200					11		26.28	78.5	0.81
150QJ10-250		250					13		30.87	79.0	0.81
150QJ10-300		300					15		35.62	79.0	0.81
150QJ15-33	15	33	2850	63	50	150runga	3	380	7.9	74.0	0.78	143
150QJ15-42		42					4		10.25	75.0	0.79
150QJ15-50		50					4		10.25	75.0	0.79
150QJ15-60		60					5.5		13.74	76	0.8
150QJ15-65		65					5.5		13.74	76.0	0.8
150QJ15-72		72					5.5		13.74	76.0	0.8
150QJ15-81		81					7.5		18.5	77.0	0.8
150QJ15-90		90					7.5		18.5	77.0	0.8
150QJ15-98		98					7.5		18.5	77.0	0.8
150QJ15-106		106					9.2		22.12	78.0	0.81
150QJ15-114		114					9.2		22.12	78.0	0.81
150QJ15-130		130					11		26.28	78.5	0.81
150QJ15-146		146					13		30.87	79.0	0.81
150QJ15-162		162					13		30.87	79.0	0.81
150QJ15-180		180					15		35.62	79.0	0.81
150QJ20-26	20	26	2850	64	50	150runga	3	380	7.9	74.0	0.78	143
150QJ20-33		33					3		7.9	74.0	0.78
150QJ20-39	20	39	2850	64	50	150runga	4	380	10.25	75.0	0.79	143
150QJ20-52		52					5.5		13.74	76.0	0.8
150QJ20-65		65					7.5		18.5	77.0	0.8
150QJ20-78		78					7.5		18.5	77.0	0.8
150QJ20-91		91					9.2		22.12	78.0	0.81
150QJ20-98		98					9.2		22.12	78.0	0.81
150QJ20-104		104					11		26.28	78.5	0.81
150QJ20-111		111					11		26.28	78.5	0.81
150QJ20-130		130					13		30.87	79.0	0.81
150QJ20-143		143					13		30.87	79.0	0.81
150QJ20-156		156					15		35.62	79.0	0.81
150QJ20-182		182					18.5		43.12	79.5	0.82
150QJ25-24	25	24	2850	64	65	150runga	3	380	7.9	74.0	0.78	143
150QJ25-32		32					4		10.25	75.0	0.79
150QJ25-40		40					5.5		13.74	76.0	0.8
150QJ25-48		48					5.5		13.74	76.0	0.8
150QJ25-56		56					7.5		18.5	77.0	0.8
150QJ25-64		64					7.5		18.5	77.0	0.8
150QJ25-72		72					9.2		22.12	78.0	0.81
150QJ25-77		77					9.2		22.12	78.0	0.81
150QJ25-84		84					11		26.28	78.5	0.81
150QJ25-96		96					11		26.28	78.5	0.81
150QJ25-104		104					13		30.87	79.0	0.81
150QJ25-110		110					13		30.87	79.0	0.81
150QJ25-120		120					15		35.62	79.0	0.81
150QJ25-128		128					15		35.62	79.0	0.81
150QJ25-136		136					18.5		43.12	79.5	0.82
150QJ25-154		154					18.5		43.12	79.5	0.82
150QJ32-18	32	18	2850	66	80	150runga	3	380	7.9	74.0	0.78	143
150QJ32-24		24					4		10.25	75.0	0.79
150QJ32-30		30					5.5		13.74	76.0	0.8
150QJ32-36		36					5.5		13.74	76.0	0.8
150QJ32-42	32	42	2850	66	80	150runga	7.5	380	18.5	77.0	0.8	143
150QJ32-54		54					9.2		22.12	78.0	0.81
150QJ32-66		66					11		26.28	78.5	0.81
150QJ32-72		72					13		30.87	79.0	0.81
150QJ32-84		84					13		30.87	79.0	0.81
150QJ32-90		90					15		35.62	79.0	0.81
150QJ32-96		96					15		35.62	79.0	0.81
150QJ32-114		114					18.5		43.12	79.5	0.82
150QJ40-16	40	16	2850	66	80	150runga	3	380	7.9	74.0	0.78	143
150QJ40-24		24					5.5		13.74	76.0	0.8
150QJ40-30		30					5.5		13.74	76.0	0.8
150QJ40-40		40					7.5		18.5	77.0	0.8
150QJ40-48		48					9.2		22.12	78.0	0.81
150QJ40-56		56					11		26.28	78.5	0.81
150QJ40-64		64					13		30.87	79.0	0.81
150QJ40-72		72					13		30.87	79.0	0.81
150QJ40-80		80					15		35.62	79.0	0.81
150QJ40-96		96					18.5		43.12	79.5	0.82
150QJ50-16	50	16	2850	65	80	150runga	4	380	10.25	75.0	0.79	143
150QJ50-22		22					5.5		13.74	76.0	0.8
150QJ50-28		28					7.5		18.5	77.0	0.8
150QJ50-34		34					9.2		22.12	78.0	0.81
150QJ50-40		40					9.2		22.12	78.0	0.81
150QJ50-46		46					11		26.28	78.5	0.81
150QJ50-52		52					13		30.87	79.0	0.81
150QJ50-57		57					15		35.62	79.0	0.81
150QJ50-74		74					18.5		43.12	79.5	0.82
150QJ50-80		80					18.5		43.12	79.5	0.82
150QJ63-12	63	12	2850	60	80	150runga	4	380	10.25	75.0	0.79	143
150QJ63-18		18					7.5		18.5	77.0	0.8
150QJ63-30		30					9.2		22.12	78.0	0.81
150QJ63-36		36					11		26.28	78.5	0.81
150QJ63-42	63	42	2850	60	80	150runga	13	380	30.87	79.0	0.81	143
150QJ63-48		48					15		35.62	79.0	0.81
150QJ63-54		54					18.5		43.12	79.5	0.82
150QJ15-220	15	220	2850		50	150runga	18.5	380	43.12			143
150QJ15-260		260					20		49.7
150QJ15-300		300					25		56.5
150QJ20-210	20	210	2850		50	150runga	20	380	49.7			143
150QJ20-240		240					25		56.5
150QJ20-290		290					30		66.6
150QJ25-175	25	175	2850		65	150runga	20		49.7			143
150QJ25-200		200					30		66.6
150QJ25-290		290					37		82.1
150QJ32-120	32	120	2850		80	150runga	20	380	49.7			143
150QJ32-132		132					25		56.5
150QJ32-156		156					30		66.6
150QJ32-190		190					37		82.1
150QJ32-240		240					45		96.9
150QJ40-110	40	110	2850		80	150runga	20	380	49.7			143
150QJ40-121		121					25		56.5
150QJ40-143		143					30		66.6
150QJ40-176		176					37		82.1
150QJ40-220		220					45		96.9
150QJ50-100	50	100	2850		80	150runga	20	380	49.7			143
150QJ50-110		110					25		56.5
150QJ50-130		130					30		66.6
150QJ50-160		160					37		82.1
150QJ50-200		200					45		96.9

Whakatupato Haumaru

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade 380/50HZ, the use of other voltage grades of submersible motors need to be customized.The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious sign:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering and steering instructions are the same.When the pump is upright, pay attention to safety, prevent overturning injury.

5, this pump has won wide acclaim for its efficiency and reliability. It is used in strict accordance with the applicable lift and flow range stipulated by the electric pump to avoid excessive wear of thrust bearings and other parts caused by large flow at low lift or excessive pumping force at high lift, resulting in motor overload and burnout. After being put into the well, the insulation resistance to the ground of the electric pump shall be measured and shall not be less than 100MΩ. After starting, the voltage and current shall be observed regularly, and the insulation of the motor winding shall be checked to meet the specified requirements. If the storage temperature is below freezing, the water in the pump shall be dried to avoid damage to the motor due to low temperature freezing in the motor cavity. This electric pump is your reliable choice, which can provide stable and reliable power support for your work.

He Kupu Whakataki ki te Hanganga

Structure brief: pump part is mainly composed of pump shaft, impeller, diversion shell, rubber bearing, check valve body (optional parts) and other components.The motor part is mainly composed of base, pressure regulating film, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand ring, water inlet joint, lead cable and other components.

Ko nga ahuatanga matua o te hua ko:

1.The motor is a water-sealed wet submersible three-phase asynchronous motor.The motor cavity is filled with clean water for cooling the motor and lubricating the bearing.The voltage regulating film at the bottom of the motor is used to regulate the temperature rise caused by the motor.The expansion and contraction pressure difference of the body water caused by the change.
2. In order to prevent the sand particles in the well water from entering the motor, two oil seals are installed at the upper end of the motor shaft extension, and a sand ring is installed to form a sand prevention structure.
3. In order to prevent the pump shaft from jumping at startup, the pump shaft is connected with the motor shaft through a coupling, and a thrust bearing is installed at the lower part of the motor.
4. The lubrication of the motor and pump bearing is water lubrication.
5. The motor stator winding is made of high-quality submersible motor winding wire, with excellent insulation performance.
6. The pump is designed by computer CAD, with simple structure and excellent technical performance.

Read More About deep well pump installation

Tāuta

(1) Whakaritenga i mua i te whakaurunga:
1. Tirohia mehemea ka tutuki te papu ruku ki nga tikanga whakamahi me te whanuitanga kua tohua ki te pukapuka.
2. Ma te whakamahi i te obiect taumaha me te diameter e rite ana ki te teitei o te diameter o waho o te papu ruku, ine mehemea ka uru te inneldiameter o te poka wai ki te papu ruku, me te ine mena ka tutuki te hohonutanga o te puna ki nga whakaritenga whakaurunga.
3. Tirohia mehemea he ma te rua o te puna me te wai pokarekare ranei. Kaua rawa e whakamahia he papu hiko ruku ki te horoi i te paru welor papu me te wai kirikiri kia kore e pakaru wawe te papu hiko ruku.
4. Tirohia mehemea he pai te tuunga o te rawhi whakaurunga welhead me te kaha ki te tu ki te kounga o te waahanga katoa.
5. Tirohia mehemea kua oti te whakaurunga o nga waahanga papu ruku me te tika kia rite ki te hoahoa huinga i roto i te pukapuka Tangohia te mata tātari ka huri i te hononga kia kite mena ka huri ngawari.
6. Wewetehia te wiri wai ka whakakiia te kohao motopaika ki te wai ma, kaua e pirau (tohu. me whakakiia ki runga), katahi ka whakakaha i te kopa wai. I muri i nga haora 12 o te werohia o te wai, kaua e iti iho i te 150M Q te parenga whakamarumaru o te motini ka ine ki te tepu wiri 500V.
7. Ko te hononga taura, tapahia he ringaringa rapa 120mm mai i tetahi pito o te taura puta me te taura taurite me te maripi a te kaiao hiko, ka wiri i te roa o nga waea matua e toru ki te ahua maeke, tihorea he uho parahi 20mm, waruhia te waikura. te paparanga ki waho o te waea parahi me te maripi, te kakahu kirikiri ranei, ka kuhu i nga pito waea hono e rua ki roto i te parepare. I muri i te herenga o te paparanga ki te waea parahi pai, whakapirihia kia pai, kia mau, me te onepu o tetahi. nga pupuhi i runga i te mata. Na, mo nga hononga e toru, whakamahia te riipene whakamaarama polyvester hei takai i roto i te ahua o te ahua o te tapae mo nga oko e toru. Takaia nga pito e rua o te paparanga takai kia mau ki te miro nyion, katahi ka whakamahi i te tikanga tatai ki te takai i te riipene mo nga papa e toru. Takaia te kaitahu ki waho ki te riipene whakamatao pehanga teitei mo nga paparanga e toru. Ka mutu, whakakopahia nga whenu e toru ka takaia mo nga paparanga e rima me te riipene pehanga teitei. Me tino herea ia paparanga, kia piri, kia piri hoki nga hononga o roto kia kore ai e kuhu te wai me te pakaru i te maataki, I muri i te takai, ruku ki te wai i te 20'c te pāmahana rūma mo te 12 haora, me te ine i te parenga whakamatao ki te tepu wiri. , kia kaua e iti iho i te 100M Ω

Ko te hoahoa tukanga waea waea kua honoa e whai ake nei:
Read More About deep well pump installation diagram

8. Whakamahi i te mita maha ki te tirotiro mena kei te hono nga waea-waa-toru me te ahua taurite te parenga DC.
9. Tirohia mehemea kua taumaha te ara iahiko me te kaha o te hurihanga, katahi ka hono atu i te pana whakamaru i te taumaha, i nga taputapu tiimata ranei. Tirohia te Ripanga 2 mo nga tauira motuhake, katahi ka ringihia he peere wai ki roto i te papu wai mai i te putanga papu wai hei whakahinuhinu i nga rapa rapa i roto i te papu, katahi ka tuu te papu hiko ruku ki runga kia mau. ka tirohia mehemea e rite ana te ahunga urungi ki te tohu urungi. Ki te kore, whakawhitia nga hononga e rua o te taura e toru-waahanga. Katahi ka whakauruhia te tātari ka takatu ki te heke ki raro i te puna. Mena ka whakamahia i roto i nga waahi motuhake (penei i nga awaawa, i nga awaawa, i nga awa, i nga harotoroto, i nga harotoroto, me etahi atu), me tika te turanga o te papu hiko.

(2) Nga taputapu me nga taputapu whakauru:
1. Kotahi te rua o nga mekameka hiki mo te neke atu i te rua tana.
2. He tripod me te teitei poutū kaua e iti iho i te wha mita.
3. E rua nga taura iri (wire ropes) ka taea te kawe i te taumaha neke atu i te kotahi tana (ka taea te kawe i te taumaha o te huinga katoa o nga papu wai).
4. Tāutahia kia rua ngā rawhi (splints).
5. Nga wrenches, hama, wiriwiri, taputapu hiko me nga taputapu, aha atu.

(3)Tautanga papu hiko:
1. Ko te hoahoa whakaurunga o te papu hiko ruku e whakaatuhia ana i te Whakaaturanga 2. Ko nga rahinga whakaurunga motuhake e whakaatuhia ana i te Ripanga 3 "Rarangi o nga Rarangi Whakamutunga o te Pump Hiko Rakau".

2. Ko nga papu hiko ruku me te upoko iti iho i te 30 mita ka taea te whakairi tika ki roto i te puna ma te whakamahi i nga ngongo me nga taura waea, etahi atu taura hemp ranei ka taea te kawe i te taumaha katoa o te miihini, nga paipa wai, me te wai i roto i nga paipa.

3. Ko nga papu me te upoko neke atu i te 30 mita te whakamahi paipa maitai, a ko te raupapa whakaurunga e whai ake nei:
①Whakamahia he rawhi hei rawhi i te pito o runga o te wahanga papu wai (kua honoa te motini me te papu wai i tenei wa), hikitia me te mekameka iri, ka ata herea ki roto i te puna tae noa ki te kuhua te rawhi ki te upoko o te puna ka tango mekameka iri.
② Whakamahia etahi atu rawhi hei rawhi i te paipa, hikitia me te mekameka iri kia 15 cm te tawhiti atu i te flange, ka ata whakaheke. I waenganui i te flange paipa me te flange papu Whakanohoia te papa rapa ki te waahi ka whakakoia te paipa me te papu kia rite ki nga tutaki, nati me nga horoi puna.
③ Whakaarahia te papu ruuma kia paku, tangohia te rawhi i te pito o runga o te papu wai, herea te taura ki te paipa wai me te riipene kirihou, ka ata herea ki raro kia tuu te rawhi ki te upoko puna.
④Whakamahia taua tikanga ki te here i nga paipa wai katoa ki roto i te puna.
⑤I muri i te hono o te taura arataki ki te pana whakahaere, ka hono atu ki te hiko hiko e toru nga wahanga.

(4) Nga mea hei tohu i te wa o te whakaurunga:
1. Mēnā ka kitea he āhuatanga tāmii i te wā e mahi ana te kumara, huri, kumea ranei te paipa wai kia pai ai te taunga. Ki te kore tonu e mahi nga momo mahi, tena koaKaua e tohe te papu ki raro kia kore ai e pakaru te papu hiko ruku me te puna.
2. I te wa o te whakaurunga, me whakanoho he papa rapa ki te taha o ia paipa me te whakakaha kia rite.
3. Ka tukuna te papu wai ki roto i te puna, me tuu ki waenganui o te paipa puna kia kore ai e rere te papu ki te pakitara o te puna mo te wa roa, ka wiri te papu, ka tahia, ka wera te motini. .
4. Whakatauhia te hohonutanga o te papu wai ki raro o te puna i runga i te rere o te onepu me te parapara o te puna. Kaua e tanu te papu ki te paru. Ko te tawhiti mai i te papu wai ki raro o te puna ko te tikanga kaua e iti iho i te 3 mita (tirohia te Whakaahua 2).
5. Ko te hohonutanga o te urunga wai o te papu wai kia kaua e iti iho i te 1-1.5 mita mai i te taumata wai hihiri ki te kohanga uru wai (tirohia te Whakaahua 2). Ki te kore, ka ngawari te pakaru o nga papa papu wai.
6. Ko te hiki o te papu wai e kore e iti rawa. Ki te kore, me whakauru he paera kuaha ki runga i te paipa wai o te upoko o te puna ki te whakahaere i te rere o te papu ki te waahi rere reiti kia kore ai te motini e nui te utaina me te wera na te nui o te rere.
7. I te wa e rere ana te papu wai, me noho tonu te whakaputanga wai me te ara, kia mau tonu te naianei (i raro i nga tikanga mahi kua whakatauhia, ko te tikanga kaua e neke atu i te 10% o te waa kua tohua), kaore he wiri, he haruru ranei. Mena he mate kino, me whakamutu te miihini kia kitea te take me te whakakore.
8. I te wa e whakauru ana, whakarongo ki te whakatakotoranga o te waea motika motika (tirohia te Whakaahua 2). Ina he paipa rino te paipa wai, arahina mai i te rawhi o te upoko puna; ina he paipa kirihou te paipa wai, arahina mai i te tohu whenua o te papu hiko.

Te Tiaki me te Tiaki

(1)After the submersible pump is installed, check the insulation resistance and three-phase conduction from the switch again, check whether the instrument and the connection of the start equipment are wrong, if there is no problem, the trial machine can be started, and observe whether the indicator readings of the instrument exceed the rated voltage and current specified on the nameplate after the start, and observe whether the pump has noise and vibration phenomenon, and put into operation if everything is normal.
(2)After the first operation of the pump for four hours, the motor should be shut down to test the thermal insulation resistance quickly, and its value should not be less than 0.5 megaohm.
(3)After the pump is shut down, it should be started after five minutes to prevent the water column in the pipe from being completely reflowed and causing excessive motor current and burnout.
(4)After the pump is put into normal operation, in order to prolong its service life, it is necessary to check whether the supply voltage, working current and insulation resistance are normal regularly. If the following conditions are found, the pump should be shut down immediately to troubleshoot.

1 In the rated condition, the current exceeds 20%.

2 Ka heke te taumata o te wai hihiri ki te wahanga uru wai, ka puta he wai mokowhiti.

3 He nui te wiri, te haruru ranei o te papu ruku.

4 He iti ake te ngaohiko tuku i te 340 volts.

5 Kua wera te ngongo.

6 Kua pakaru te paipa tuku wai.

7 The motor's thermal insulation resistance is lower than 0.5 megaohm.

(5)Unit disassembly:

1 Untie the cable tie, remove the pipeline part, and remove the wire plate.

2 whakawetohia te raka wai, kuhua te wai ki roto i te ruma motopaika.

3 tango i te tātari, wetewete te tīwiri pūmau i runga i te hononga ki te whakatika i te rakau nekeneke.

4 whakawetohia te raka e hono ana i te waahanga uru wai me te motini, ka wehea te papu mai i te motini (kia tupato ki te urunga o te waeine ina wehe, kia kore ai e piko te pou papu)

5 ko te raupapa wetewete o te papu: (tirohia te ahua 1) te waahanga uru wai, te impeller, te anga whakahuri, te impeller...... tirohia te tinana takirere, ka tango i te impeller, whakamahia nga taputapu motuhake hei wewete i te ringaringa koeko o te kua mau. impeller tuatahi, a ka karo i te piko me te maru i te rakau papu i roto i te tukanga o te wetewete.

6 ko te mahi wetewete o te motini: (tirohia te ahua 1) tuu te motini ki runga i te papa, ka tango i nga nati, te turanga, te nati maukati mahunga, te pereti pana, te ki, te nohoanga kaiarahi o raro me te raka upoko rua mai i te raro o ka huri te motuka, katahi ka tango i te rotor (kia tupato kia kaua e pakaru te kete waea) ka mutu te tango i te waahanga hono me te nohoanga kaiarahi o runga.

Huihuinga 7: i mua i te huihuinga, me horoi te waikura me te paru o nga waahanga, ka whakakikoruatia te mata o te mating me nga here ki te hiri, katahi ka whakaemihia i runga i te ritenga o te wetewete (ka neke ake te neke o te motuka motuka i muri i te huihuinga mo te kotahi mirimita), i muri i te huihuinga, me ngawari te hononga, katahi ka te miihini whakamatautau mata tātari. Me tango nga papu ruku i roto i te puna mo te wetewete me te tiaki i runga i te rarangi 5 i muri i te kotahi tau o te mahi, iti iho ranei i te kotahi tau e mahi ana engari e rua tau te wa ruku, ka whakakapia nga wahi kua ruku.

Rokiroki me te Tiaki

In order to ensure long-term use of your submersible pump, we strongly recommend that you drain the water in all motor cavities especially in winter to prevent the motor from freezing; at the same time, roll up the cable and tie it well. Store the equipment in a room without corrosive substances and gases, with the temperature below 40 °C. In addition, if you do not use the submersible pump for a long time, be sure to pay attention to rust prevention measures. These simple steps will help you maintain the performance of the equipment and extend its service life.

Mau Wahi