150QJ Lalina Fantsakana Pompe

Manaova fanodinana OEM! Araka ny fepetra takian'ny mpampiasa, ny famolavolana sy ny fanamboarana karazana fepetra manokana tsy manara-penitra submersible maotera sy ny paompy. Ny fenitra fampiharana ny vokatra: GB / T2816-2014 "paompy submersible tsara", GB / T2818-2014 "motera asynchronous tsara submersible". WhatsApp: 17855846335

Mifandraisa amin'izay PDF DOWNLOAD

tsipiriany

Read More About deep water well pump

Reference Modely ampahany

MODELY	Fikoriana (m3/h)	LOHA (m)	Rotatingspeed (fiovana/ teboka)	Paompy rano(%)	fivoahan'ny savaivony (mm)	Azo ampiharina tsara savaivony (mm)	naoty hery (KW)	naoty malefaka (V)	naoty ankehitriny (A)	Fahombiazan'ny motera (%)	power factorcosφ	Unit Radial Habe ambony (mm)	fanamarihana
150QJ5-100	5	100	2850	58	40	150	3	380	7.9	74.0	0.78	143
150QJ5-150	5	150	2850	58	40	150 ambony	4	380	10.25	75.0	0.79	143
150QJ5-200		200					5.5		13.74	76.0	0.8
150QJ5-250		250					7.5		18.5	77.0	0.8
150QJ5-300		300					9.2		22.12	78.0	0.81
150QJ10-50	10	50	2850	63	50	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ10-66		66					4		10.25	75.0	0.79
150QJ10-78		78					4		10.25	75.0	0.79
150QJ10-84		84					5.5		13.74	76.0	0.8
150QJ10-91		91					5.5		13.74	76.0	0.8
150QJ10-100		100					5.5		13.74	76.0	0.8
150QJ10-128		128					7.5		18.5	77.0	0.8
150QJ10-150		150					7.5		18.5	77.0	0.8
150QJ10-200		200					11		26.28	78.5	0.81
150QJ10-250		250					13		30.87	79.0	0.81
150QJ10-300		300					15		35.62	79.0	0.81
150QJ15-33	15	33	2850	63	50	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ15-42		42					4		10.25	75.0	0.79
150QJ15-50		50					4		10.25	75.0	0.79
150QJ15-60		60					5.5		13.74	76	0.8
150QJ15-65		65					5.5		13.74	76.0	0.8
150QJ15-72		72					5.5		13.74	76.0	0.8
150QJ15-81		81					7.5		18.5	77.0	0.8
150QJ15-90		90					7.5		18.5	77.0	0.8
150QJ15-98		98					7.5		18.5	77.0	0.8
150QJ15-106		106					9.2		22.12	78.0	0.81
150QJ15-114		114					9.2		22.12	78.0	0.81
150QJ15-130		130					11		26.28	78.5	0.81
150QJ15-146		146					13		30.87	79.0	0.81
150QJ15-162		162					13		30.87	79.0	0.81
150QJ15-180		180					15		35.62	79.0	0.81
150QJ20-26	20	26	2850	64	50	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ20-33		33					3		7.9	74.0	0.78
150QJ20-39	20	39	2850	64	50	150AMBONY	4	380	10.25	75.0	0.79	143
150QJ20-52		52					5.5		13.74	76.0	0.8
150QJ20-65		65					7.5		18.5	77.0	0.8
150QJ20-78		78					7.5		18.5	77.0	0.8
150QJ20-91		91					9.2		22.12	78.0	0.81
150QJ20-98		98					9.2		22.12	78.0	0.81
150QJ20-104		104					11		26.28	78.5	0.81
150QJ20-111		111					11		26.28	78.5	0.81
150QJ20-130		130					13		30.87	79.0	0.81
150QJ20-143		143					13		30.87	79.0	0.81
150QJ20-156		156					15		35.62	79.0	0.81
150QJ20-182		182					18.5		43.12	79.5	0.82
150QJ25-24	25	24	2850	64	65	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ25-32		32					4		10.25	75.0	0.79
150QJ25-40		40					5.5		13.74	76.0	0.8
150QJ25-48		48					5.5		13.74	76.0	0.8
150QJ25-56		56					7.5		18.5	77.0	0.8
150QJ25-64		64					7.5		18.5	77.0	0.8
150QJ25-72		72					9.2		22.12	78.0	0.81
150QJ25-77		77					9.2		22.12	78.0	0.81
150QJ25-84		84					11		26.28	78.5	0.81
150QJ25-96		96					11		26.28	78.5	0.81
150QJ25-104		104					13		30.87	79.0	0.81
150QJ25-110		110					13		30.87	79.0	0.81
150QJ25-120		120					15		35.62	79.0	0.81
150QJ25-128		128					15		35.62	79.0	0.81
150QJ25-136		136					18.5		43.12	79.5	0.82
150QJ25-154		154					18.5		43.12	79.5	0.82
150QJ32-18	32	18	2850	66	80	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ32-24		24					4		10.25	75.0	0.79
150QJ32-30		30					5.5		13.74	76.0	0.8
150QJ32-36		36					5.5		13.74	76.0	0.8
150QJ32-42	32	42	2850	66	80	150AMBONY	7.5	380	18.5	77.0	0.8	143
150QJ32-54		54					9.2		22.12	78.0	0.81
150QJ32-66		66					11		26.28	78.5	0.81
150QJ32-72		72					13		30.87	79.0	0.81
150QJ32-84		84					13		30.87	79.0	0.81
150QJ32-90		90					15		35.62	79.0	0.81
150QJ32-96		96					15		35.62	79.0	0.81
150QJ32-114		114					18.5		43.12	79.5	0.82
150QJ40-16	40	16	2850	66	80	150AMBONY	3	380	7.9	74.0	0.78	143
150QJ40-24		24					5.5		13.74	76.0	0.8
150QJ40-30		30					5.5		13.74	76.0	0.8
150QJ40-40		40					7.5		18.5	77.0	0.8
150QJ40-48		48					9.2		22.12	78.0	0.81
150QJ40-56		56					11		26.28	78.5	0.81
150QJ40-64		64					13		30.87	79.0	0.81
150QJ40-72		72					13		30.87	79.0	0.81
150QJ40-80		80					15		35.62	79.0	0.81
150QJ40-96		96					18.5		43.12	79.5	0.82
150QJ50-16	50	16	2850	65	80	150AMBONY	4	380	10.25	75.0	0.79	143
150QJ50-22		22					5.5		13.74	76.0	0.8
150QJ50-28		28					7.5		18.5	77.0	0.8
150QJ50-34		34					9.2		22.12	78.0	0.81
150QJ50-40		40					9.2		22.12	78.0	0.81
150QJ50-46		46					11		26.28	78.5	0.81
150QJ50-52		52					13		30.87	79.0	0.81
150QJ50-57		57					15		35.62	79.0	0.81
150QJ50-74		74					18.5		43.12	79.5	0.82
150QJ50-80		80					18.5		43.12	79.5	0.82
150QJ63-12	63	12	2850	60	80	150AMBONY	4	380	10.25	75.0	0.79	143
150QJ63-18		18					7.5		18.5	77.0	0.8
150QJ63-30		30					9.2		22.12	78.0	0.81
150QJ63-36		36					11		26.28	78.5	0.81
150QJ63-42	63	42	2850	60	80	150AMBONY	13	380	30.87	79.0	0.81	143
150QJ63-48		48					15		35.62	79.0	0.81
150QJ63-54		54					18.5		43.12	79.5	0.82
150QJ15-220	15	220	2850		50	150AMBONY	18.5	380	43.12			143
150QJ15-260		260					20		49.7
150QJ15-300		300					25		56.5
150QJ20-210	20	210	2850		50	150AMBONY	20	380	49.7			143
150QJ20-240		240					25		56.5
150QJ20-290		290					30		66.6
150QJ25-175	25	175	2850		65	150AMBONY	20		49.7			143
150QJ25-200		200					30		66.6
150QJ25-290		290					37		82.1
150QJ32-120	32	120	2850		80	150AMBONY	20	380	49.7			143
150QJ32-132		132					25		56.5
150QJ32-156		156					30		66.6
150QJ32-190		190					37		82.1
150QJ32-240		240					45		96.9
150QJ40-110	40	110	2850		80	150AMBONY	20	380	49.7			143
150QJ40-121		121					25		56.5
150QJ40-143		143					30		66.6
150QJ40-176		176					37		82.1
150QJ40-220		220					45		96.9
150QJ50-100	50	100	2850		80	150AMBONY	20	380	49.7			143
150QJ50-110		110					25		56.5
150QJ50-130		130					30		66.6
150QJ50-160		160					37		82.1
150QJ50-200		200					45		96.9

Fiarovana fiarovana

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade 380/50HZ, the use of other voltage grades of submersible motors need to be customized.The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious sign:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering and steering instructions are the same.When the pump is upright, pay attention to safety, prevent overturning injury.

5, this pump has won wide acclaim for its efficiency and reliability. It is used in strict accordance with the applicable lift and flow range stipulated by the electric pump to avoid excessive wear of thrust bearings and other parts caused by large flow at low lift or excessive pumping force at high lift, resulting in motor overload and burnout. After being put into the well, the insulation resistance to the ground of the electric pump shall be measured and shall not be less than 100MΩ. After starting, the voltage and current shall be observed regularly, and the insulation of the motor winding shall be checked to meet the specified requirements. If the storage temperature is below freezing, the water in the pump shall be dried to avoid damage to the motor due to low temperature freezing in the motor cavity. This electric pump is your reliable choice, which can provide stable and reliable power support for your work.

Fampidirana ny Structure

Structure brief: pump part is mainly composed of pump shaft, impeller, diversion shell, rubber bearing, check valve body (optional parts) and other components.The motor part is mainly composed of base, pressure regulating film, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand ring, water inlet joint, lead cable and other components.

Ny tena mampiavaka ny vokatra dia ahitana:

1.The motor is a water-sealed wet submersible three-phase asynchronous motor.The motor cavity is filled with clean water for cooling the motor and lubricating the bearing.The voltage regulating film at the bottom of the motor is used to regulate the temperature rise caused by the motor.The expansion and contraction pressure difference of the body water caused by the change.
2. In order to prevent the sand particles in the well water from entering the motor, two oil seals are installed at the upper end of the motor shaft extension, and a sand ring is installed to form a sand prevention structure.
3. In order to prevent the pump shaft from jumping at startup, the pump shaft is connected with the motor shaft through a coupling, and a thrust bearing is installed at the lower part of the motor.
4. The lubrication of the motor and pump bearing is water lubrication.
5. The motor stator winding is made of high-quality submersible motor winding wire, with excellent insulation performance.
6. The pump is designed by computer CAD, with simple structure and excellent technical performance.

Read More About deep well pump installation

hametraka

(1) Fiomanana alohan'ny fametrahana:
1. Hamarino raha mahafeno ny fepetra fampiasana sy ny habaka voafaritra ao amin'ny boky ny paompy submersible.
2. Mampiasa obiect mavesatra miaraka amin'ny savaivony mitovy amin'ny savaivony ivelany ambony indrindra amin'ny paompy submersible, refeso raha mety hifanaraka amin'ny paompy submersible ny savaivony amin'ny lavaka fantsakana, ary refesina raha mahafeno ny fepetra takiana amin'ny fametrahana ny halaliny.
3. Hamarino raha madio ny lavaka fantsakana ary ny rano fantsakana dia feno rano. Aza mampiasa paompy elektrika azo atsoboka mihitsy mba hanasana ny fotaka sy ny rano fasika mba hisorohana ny fahasimbana aloha loatra amin'ny paompy elektrika.
4. Hamarino raha mety ny toerana misy ny clamp fametrahana welhead ary mahatanty ny kalitaon'ny vondrona manontolo.
5. Hamarino raha toa ka feno sy apetraka araka ny tokony ho izy ny singa ao amin'ny paompy submersible araka ny kisarisary ao amin'ny boky torolalana.
6. Esory ny visy ary fenoy rano madio tsy misy korontanina ny lavaky ny môtô (mariho. Ataovy azo antoka ny famenoana azy), ary henjana ny vy. Taorian'ny 12 ora ny tsindrona rano, ny insulation fanoherana ny maotera dia tsy tokony ho latsaky ny 150M Q rehefa refesina amin'ny 500V nihozongozona latabatra.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

Toy izao manaraka izao ny diagrama fizotry ny fizotry ny tariby tariby mifamatotra:
Read More About deep well pump installation diagram

8. Mampiasà multimeter mba hijerena raha mifandray ny tariby telo-dingana ary sao dia mifandanja ny fanoherana DC.
9. Jereo raha be loatra ny fahaizan'ny circuit sy ny transformer, ary ampifandraiso amin'ny fiatoana fiarovana na fitaovana fanombohana avy eo. Jereo ny tabilao 2 ho an'ny maodely manokana, ary avy eo dia arotsaho ao anaty paompy rano avy amin'ny fivoahan'ny paompy rano ny siny mba hanesorana ny fingotra ao amin'ny paompy, ary avy eo dia apetraho mitsangana sy miorim-paka ny paompy elektrika an-drano. ary jereo raha mifanaraka amin'ny famantarana ny familiana ny fitarihana. Raha tsy izany dia ampifamadiho ny mpampitohy roa amin'ny tariby misy dingana telo. Avy eo apetraho ny sivana ary miomàna hidina amin'ny fantsakana. Raha ampiasaina amin'ny fotoana manokana (toy ny tatatra, tatatra, renirano, dobo, dobo, sns.), Ny paompy elektrika dia tsy maintsy miorina tsara.

(2) Fametrahana fitaovana sy fitaovana:
1. Rojo fanandratana roa mihoatra ny roa taonina.
2. Tripod misy haavo mitsangana tsy latsaky ny efatra metatra.
3. Tady mihantona roa (tady tariby) izay mahazaka lanja mihoatra ny iray taonina (mahazaka ny lanjan'ny paompin-drano feno).
4. Mametraka clamp roa (splints).
5. Wrenches, tantanana, screwdrivers, fitaovana elektrika sy fitaovana, sns.

(3) Fametrahana paompy elektrika:
1. Ny sarin'ny fametrahana ny paompy elektrika an-tsokosoko dia aseho amin'ny sary 2. Ny refy fametrahana manokana dia aseho amin'ny tabilao 3 "Lisitry ny haben'ny fametrahana ny paompy elektrika azo ampiasaina".

2. Ny paompy elektrika azo atsoboka amin'ny lohany latsaky ny 30 metatra dia azo atsangana mivantana ao amin'ny fantsakana amin'ny fampiasana hoses sy tady tariby na tady hemp hafa izay mahazaka ny lanjan'ny milina iray manontolo, ny fantson-drano ary ny rano ao anaty fantsona.

3. Ny paompy manana loha mihoatra ny 30 metatra dia mampiasa fantsona vy, ary ny filaharan'ny fametrahana dia toy izao manaraka izao:
①Mampiasà clamp hanintonana ny tendrony ambony amin'ny ampahany amin'ny paompy rano (efa mifandray ny motera sy ny paompy rano amin'izao fotoana izao), atsangano amin'ny rojo mihantona, ary afehezo tsikelikely ao anaty lavaka fantsakana mandra-pametraka ny fametahana eo amin'ny lohan'ny fantsakana ary esory rojo mihantona.
② Mampiasà fametahana roa hafa hamehezana sodina, atsangano amin'ny rojo mihantona eo amin'ny 15 sm miala ny flange, ary ampidino tsikelikely. Eo anelanelan'ny flange pipe sy flange paompyApetraho eo amin'ny toerany ny pad fingotra ary henjana ny sodina ary paompy mitovy amin'ny bolt, voanjo ary mpanasa lohataona.
③ Asandrato kely ny paompin-drano, esory ny fametahana eo amin'ny tendrony ambony amin'ny paompy rano, afehezo mafy amin'ny fantsona plastika ny tariby, ary afehezo tsikelikely mandra-pametraka ny fametahana eo amin'ny lohan'ny fantsakana.
④Mampiasà fomba mitovy amin'ny famatorana ny fantsona rehetra ao anaty lavaka fantsakana.
⑤Rehefa mifandray amin'ny tariby fanaraha-maso ny tariby mitarika, dia mifandray amin'ny famatsiana herinaratra amin'ny dingana telo izany.

(4) Zavatra tokony homarihina mandritra ny fametrahana:
1. Raha toa ka misy trangan-javatra misy fitohanana hita mandritra ny fizotry ny paompy, atodiho na sintonina ny fantson-drano mba hialana amin'ny teboka mikorontana. Raha mbola tsy mandeha ny fepetra isan-karazany, azafadyAza terena hidina ny paompy mba hisorohana ny fahasimban'ny paompy elektrika sy ny fantsakana.
2. Mandritra ny fametrahana dia tokony hapetraka eo amin'ny sisin'ny sodina tsirairay ny pad fingotra ary hamafisina tsara.
3. Rehefa ampidinina ao anaty fantsakana ny paompy rano, dia tokony hapetraka eo afovoan'ny fantsakana izany mba hisorohana ny paompy tsy hianjera amin'ny rindrin'ny fantsakana mandritra ny fotoana maharitra, ka mahatonga ny paompy hihovitrovitra ary ny motera hifafa sy handoro. .
4. Farito ny halalin'ny paompin-drano mankany amin'ny fanambanin'ny fantsakana araka ny toetry ny fasika mikoriana sy ny fotaka. Aza alevina ao anaty fotaka ny paompy. Ny halaviran'ny paompin-drano mankany amin'ny fanambanin'ny fantsakana amin'ny ankapobeny dia tsy latsaky ny 3 metatra (jereo ny sary 2).
5. Ny halalin'ny rano miditra amin'ny paompy dia tsy tokony ho latsaky ny 1-1,5 metatra avy amin'ny haavon'ny rano mavitrika mankany amin'ny node fampidirana rano (jereo ny sary 2). Raha tsy izany dia mety ho simba mora foana ny paompy rano.
6. Tsy tokony ho ambany loatra ny fiakaran'ny paompy rano. Raha tsy izany, mila asiana valva vavahady eo amin'ny fantson-drano amin'ny lohan'ny fantsakana mba hifehezana ny fikorianan'ny paompy eo amin'ny toerana misy naoty mba hisorohana ny motera tsy ho be loatra sy ho may noho ny tahan'ny fikorianan'ny rivotra.
7. Rehefa mandeha ny paompy rano, ny fivoahan'ny rano dia tokony ho mitohy ary na dia, ny ankehitriny dia tokony ho marin-toerana (eo ambanin'ny fepetra miasa, amin'ny ankapobeny tsy mihoatra ny 10% ny naoty ankehitriny), ary tsy tokony hisy hovitrovitra na tabataba. Raha misy tsy mety dia tokony hajanona ny milina mba hahitana ny antony sy hanafoanana izany.
8. Rehefa mametraka, tandremo tsara ny fametrahana ny tariby fanodinkodinana maotera (jereo ny sary 2). Raha sodina vy ny fantsona rano, dia tariho avy amin'ny fantson-drano; rehefa fantsona plastika ny fantsona rano dia tariho avy amin'ny marika fototra amin'ny paompy elektrika.

Fikojakojana sy Fikojakojana

(1)After the submersible pump is installed, check the insulation resistance and three-phase conduction from the switch again, check whether the instrument and the connection of the start equipment are wrong, if there is no problem, the trial machine can be started, and observe whether the indicator readings of the instrument exceed the rated voltage and current specified on the nameplate after the start, and observe whether the pump has noise and vibration phenomenon, and put into operation if everything is normal.
(2)After the first operation of the pump for four hours, the motor should be shut down to test the thermal insulation resistance quickly, and its value should not be less than 0.5 megaohm.
(3)After the pump is shut down, it should be started after five minutes to prevent the water column in the pipe from being completely reflowed and causing excessive motor current and burnout.
(4)After the pump is put into normal operation, in order to prolong its service life, it is necessary to check whether the supply voltage, working current and insulation resistance are normal regularly. If the following conditions are found, the pump should be shut down immediately to troubleshoot.

1 In the rated condition, the current exceeds 20%.

2 Ny haavon'ny rano mavitrika dia midina any amin'ny faritra fidirana amin'ny rano, ka miteraka rano miato.

3 Ny paompy submersible dia misy vibration na tabataba mafy.

4 Ny voltase famatsiana dia ambany noho ny 340 volts.

5 May ny fuse iray.

6 Simba ny fantsona famatsian-drano.

7 The motor's thermal insulation resistance is lower than 0.5 megaohm.

(5)Unit disassembly:

1 Untie the cable tie, remove the pipeline part, and remove the wire plate.

2 Ampidino ny bolt rano, apetraho ao anaty efitranon'ny motera ny rano.

3 Esory ny sivana, esory ny visy raikitra eo amin'ny fampifangaroana mba hanitsiana ny tadin'ny maotera.

4 Ampidino ny bolt mampifandray ny fizarana rano miditra amin'ny motera, ary saraho ny paompy amin'ny maotera (tandremo ny cushion vondrona rehefa misaraka, mba hisorohana ny fiondrika ny paompy shaft)

5 ny filaharan'ny disassembly ny paompy dia: (jereo ny sary 1) fizarana rano fidiran'ny rano, impeller, diversion akorandriaka, impeller...... jereo valve vatana, rehefa manala ny impeller, mampiasa fitaovana manokana hamaha ny conical tanany ny raikitra. impeller aloha, ary aza miforitra sy mangetaheta ny paompy shaft amin'ny dingan'ny disassembly.

6 Ny disassembly ny maotera dia: (jereo ny sary 1) mametraka ny maotera eo amin'ny lampihazo, ary esory ny voanjo, fototra, shaft loha mihidy voanjo, thrust takelaka, lakile, mpitari-dalana ambany mitondra seza sy ny loha roa bolt avy amin'ny farany ambany ny ny maotera indray, ary avy eo dia esory ny rotor (tandremo mba tsy hanimba ny tariby fonosana) ary farany esory ny mampifandray fizarana sy ny mpitari-dalana ambony mitondra seza.

Fivoriambe 7: alohan'ny fivoriambe dia tokony hodiovina ny harafesina sy ny loto amin'ny ampahany, ary ny tampon-kavoana sy ny fametahana dia voapetaka amin'ny sealant, ary avy eo dia mivory amin'ny filaharana mifanohitra amin'ny disassembly (miakatra sy midina ny motera aorian'ny fivoriambe mandritra ny iray. milimetatra), aorian'ny fivoriambe, ny fifandraisana dia tokony ho malefaka, ary avy eo ny milina fitsapana efijery sivana. Ny paompy antsitrika dia alaina avy ao anaty fantsakana ho fandravana sy fikojakojana araka ny andininy faha-5 aorian’ny herintaona niasana, na latsaky ny herintaona niasana nefa roa taona nisitrika, ary hosoloina ny kojakoja efa tonta.

Fitehirizana sy fitandremana

In order to ensure long-term use of your submersible pump, we strongly recommend that you drain the water in all motor cavities especially in winter to prevent the motor from freezing; at the same time, roll up the cable and tie it well. Store the equipment in a room without corrosive substances and gases, with the temperature below 40 °C. In addition, if you do not use the submersible pump for a long time, be sure to pay attention to rust prevention measures. These simple steps will help you maintain the performance of the equipment and extend its service life.

Mitafy Parts