150QJP Ngintip sumur Pompa Submersible

QJP series special fountain pump is a fountain pump with higher efficiency developed by our factory. The motor core of the pump is made of high quality cold rolled silicon steel, which makes the pump have good magnetic permeability and will not produce heat when starting frequently. The two ends of the motor rotor are equipped with water-lubricated alloy copper sleeves instead of ball bearings, thus avoiding the problem of easy rust of ball bearings and burnout of motor due to lack of oil. 0JP series pump is also equipped with a variety of intelligent functions, such as over-temperature protection, anti-dry burning protection, etc., to ensure the safe operation of the pump. The pump is suitable for fountain decoration in landscape engineering, square, garden and other different occasions, providing users with efficient and reliable pumping solutions.

1, catu daya: tilu-fase AC 380V (kasabaran + / - 5%), 50HZ (kasabaran + / - 1%).

2, kualitas cai:

(1) water temperature is not higher than 20 °C;

(2) eusi najis padet (rasio massa) teu leuwih gede ti 0,01%;

(3) Nilai PH (pH) 6,5-8,5;

(4) eusi hidrogén sulfida teu leuwih gede ti 1.5mg/L;

(5) eusi ion klorida teu leuwih gede ti 400mg/L.

3, motor ditutup atawa struktur baseuh cai-kaeusi, saméméh pamakéan rongga motor submersible kudu pinuh ku cai bersih, pikeun nyegah palsu pinuh, lajeng tighten suntik cai, bolts release hawa, disebutkeun teu diwenangkeun ngagunakeun.

4, pompa submersible kudu sagemblengna submerged dina caina, jero diving teu leuwih gede ti 70m, handap pompa submersible ti handap sumur teu kurang ti 3m.

5, aliran cai sumur kudu bisa minuhan kaluaran cai pompa submersible sarta operasi kontinyu, kaluaran cai pompa submersible kudu dikawasa dina 0.7 - 1.2 kali aliran dipeunteun.

6, sumur kudu lempeng, pompa submersible teu bisa dipaké atawa dumped, ngan pamakéan nangtung.

7, pompa submersible kudu loyog jeung kabel nurutkeun sarat, jeung alat panyalindungan overload éksternal.

8, pompa nu mastikeun dilarang tanpa cai no-beban mesin test

1, sumur pompa submersible pikeun pompa cai bersih, prohibits sumur anyar, ngompa sédimén jeung cai bécék,

2, sumur pompa cai tegangan kelas 380 / 50HZ, pamakéan sasmita tegangan séjén motor submersible perlu ngaropéa. Kabel jero taneuh kedah nganggo kabel tahan cai, kedah dilengkepan alat-alat ngamimitian, sapertos kotak distribusi, ngamimitian henteu siap kedah gaduh fungsi panyalindungan komprehensif motor anu biasa dianggo, sapertos panyalindungan overload sirkuit pondok, panyalindungan fase, panyalindungan undervoltage, panyalindungan grounding, panyalindungan idling. , bisi kaayaan abnormal, alat panyalindungan kudu timely Peta lalampahan.

3, instalasi tur pamakéan pompa kudu reliably grounded, prohibits push jeung tarikan switch lamun leungeun jeung suku anu baseuh, kudu neukteuk off catu daya saméméh instalasi tur pamaliharaan tina pompa, pompa pamakéan tempat pikeun nyetél " pikeun nyegah shock listrik" tanda atra:

4, Turun sumur atawa saméméh instalasi, Rongga motor kudu ngeusi cai sulingan atawa non-corrosive bersih tiis cai ngagolak, tighten nu / baud cai, pompa dina test ngajalankeun taneuh, kudu ka karét lubrication cai chamber pompa. bantalan, ngamimitian instan teu leuwih ti sadetik, tingali naha setir sarua jeung parentah steering. Nalika pompa éta orientasi tegak, nengetan kaamanan, nyegah overturning tatu.

5, mastikeun nurutkeun dibekelan tina angkat pompa, rentang aliran pamakéan, pikeun nyegah aliran low atawa gaya ngompa angkat tinggi, dorong bearing jeung bagian séjén maké, nu overload motor dibeuleum 6, sanggeus pompa handap sumur, pangukuran motor ka résistansi insulasi taneuh teu kudu kirang ti 100M, sanggeus mimiti niténan tegangan jeung arus, pariksa insulasi motor pungkal, naha luyu jeung sarat; pompa suhu lokasi gudang lamun kirang ti titik beku, kudu garing cai Rongga motor, nyegah karuksakan és cai Rongga motor disababkeun ku hawa low.

The pump part is mainly composed of pump shaft, impeller, flow guide housing, rubber bearing, check valve body (optional) and other parts. The motor part is mainly composed of base, pressure regulating diaphragm, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand discharging ring, water inlet section, lead cable and other parts. The main features of the product include: the motor is a water-filled wet submersible three-phase asynchronous motor, the motor cavity is filled with clear water for cooling the motor and lubricating the bearing, the pressure regulating diaphragm at the bottom of the motor is used to adjust the pressure difference caused by the heating of the motor. In order to prevent the sand in the well water from entering the motor, the upper end of the motor shaft extension is installed with two oil seals, and the sand discharging ring is installed to form a sand prevention structure. In order to avoid the pump shaft jumping when starting, the pump shaft is connected with the motor shaft through a coupling, and the thrust bearing is installed at the bottom of the motor. The lubrication of the motor and the pump bearing is water lubrication, and the stator winding of the motor uses high quality submersible motor wire with high insulation performance. The pump is designed by computer CAD, with simple structure and superior technical performance.

(1) Persiapan saméméh instalasi:
1. Pariksa naha pompa submersible meets kaayaan pamakéan sarta wengkuan spésifed dina manual.
2. Ngagunakeun obiect beurat kalawan diaméter sarua jeung diaméter luar maksimum pompa submersible, ngukur naha inneldiameter of wellbore nu bisa nyocogkeun ka pompa submersible, sarta ngukur naha jero sumur meets sarat instalasi.
3. Pariksa naha liang sumur beresih jeung cai sumur keruh. Pernah ngagunakeun pompa listrik submersible pikeun ngumbah leutak pompa welor jeung cai keusik pikeun nyegah karuksakan prématur kana pompa listrik submersible.
4. Pariksa naha posisi clamp pamasangan welhead cocog sareng naha éta tiasa tahan kualitas sadaya unit.
5. Pariksa lamun komponén pompa submersible geus réngsé sarta dipasang leres nurutkeun diagram assembly dina manualLeupaskeun layar filter sarta muterkeun gandeng pikeun nempo lamun rotates flexibly
6. Unscrew nu screw cai jeung fillthe rohangan motor jeung bersih, cai non corrosive (catetan. Pastikeun pikeun fil eta nepi), teras tighten waterscrew nu. Saatos 12 jam suntikan cai, résistansi insulasi motor henteu kedah kirang ti 150M Q nalika diukur nganggo méja oyag 500V.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

Diagram prosés wiring kabel napel nyaéta kieu:

8. Paké multimeter pikeun pariksa naha kawat tilu-fase disambungkeun tur naha lalawanan DC kira saimbang.
9. Pariksa naha sirkuit jeung trafo kapasitas overloaded, lajeng sambungkeun switch panyalindungan overload atawa alat dimimitian. Tempo Table 2 pikeun model husus, lajengTuang ember cai kana pompa cai ti outlet pompa cai mun lubricate bantalan karét dina pompa, lajeng nempatkeun pompa listrik submersible orientasi tegak tur steady.Start (teu leuwih ti hiji detik) jeung pariksa naha arah steering konsisten jeung tanda steering. Lamun henteu, swap wae dua panyambungna tina kabel tilu-fase. Lajeng install filter sarta nyiapkeun turun sumur. Upami dianggo dina kaayaan anu khusus (sapertos parit, parit, walungan, balong, balong, jsb.), pompa listrik kedah didasarkeun sacara dipercaya.

(2) Alat sareng alat pamasangan:
1. Hiji pasangan ngangkat ranté pikeun leuwih ti dua ton.
2. A tripod kalayan jangkungna nangtung teu kurang ti opat méter.
3. Dua tali gantung (tali kawat) nu bisa nanggung beurat leuwih ti hiji ton (bisa nanggung beurat hiji set lengkep pompa cai).
4. Pasang dua pasang jepitan (splints).
5. Wrenches, palu, obeng, pakakas listrik jeung instrumen, jsb.

(3) pamasangan pompa listrik:
1. Diagram instalasi tina pompa listrik submersible ditémbongkeun dina Gambar 2. Dimensi instalasi husus ditémbongkeun dina Table 3 "Daptar Dimensi Instalasi Pompa Electric Submersible".

2. Pompa listrik submersible kalawan sirah kirang ti 30 méter bisa hoisted langsung kana sumur ngagunakeun hoses jeung tali kawat atawa tali hemp lianna nu bisa nanggung beurat pinuh ku sakabéh mesin, pipa cai, jeung cai dina pipa.

3. Pompa kalayan sirah leuwih ti 30 méter ngagunakeun pipa baja, sarta runtuyan instalasi nyaéta kieu:
①Pake jepitan pikeun ngajepit tungtung luhur bagian pompa cai (motor sareng pompa cai parantos nyambungkeun waktos ayeuna), angkat nganggo ranté gantung, teras dasikeun lalaunan kana sumur dugi ka Pasang jepitan dina sirah sumur teras cabut ranté gantung.
② Paké sapasang clamps séjén pikeun clamp pipa, angkat eta kalawan ranté gantung 15 cm jauh ti flange, sarta nurunkeun eta lalaunan. Antara flange pipe jeung flange pompa Pasang pad karét di tempat sarta tighten pipa na pompa merata kalawan bolts, kacangan sarta spring washers.
③ Angkat pompa beuleum saeutik, cabut jepitan dina tungtung luhur pompa cai, dasi kabelna pageuh kana pipa cai nganggo pita plastik, teras talitikeun lalaunan dugi ka jepitan disimpen dina sumur.
④Paké cara nu sarua pikeun ngabeungkeut sakabéh pipa cai kana sumur.
⑤Saatos kabel timbal-kaluar disambungkeun ka saklar kontrol, éta disambungkeun ka catu daya tilu-fase.

(4) Hal-hal anu kedah diperhatoskeun nalika instalasi:
1. Lamun fenomena jamming kapanggih salila prosés ngompa, balikkeun atawa tarik pipa cai pikeun nungkulan titik jamming. Lamun sagala rupa ukuran masih teu hasil, mangga Ulah maksakeun pompa ka handap pikeun nyegah karuksakan kana pompa listrik submersible jeung sumur.
2. Salila instalasi, a Pad karét kudu ditempatkeun di flange unggal pipa na tightened merata.
3. Nalika pompa cai diturunkeun kana sumur, éta kudu ditempatkeun di tengah-tengah pipa sumur pikeun nyegah pompa tina ngajalankeun kana témbok sumur pikeun lila, ngabalukarkeun pompa ngageter jeung motor keur nyapu jeung kaduruk. .
4. Nangtukeun jero pompa cai ka handapeun sumur dumasar kana keusik anu ngalir sareng kaayaan leutak sumur. Ulah ngubur pompa dina leutak. Jarak ti pompa cai ka handapeun sumur umumna teu kurang ti 3 méter (tingali Gambar 2).
5. Jero asupna cai tina pompa cai kedah teu kurang ti 1-1,5 méter ti tingkat cai dinamis ka titik inlet cai (tingali Gambar 2). Upami teu kitu, bantalan pompa cai tiasa gampang ruksak.
6. The lift tina pompa cai teu tiasa teuing low. Upami teu kitu, klep gerbang kedah dipasang dina pipa cai sumur pikeun ngontrol aliran pompa dina titik aliran anu dipeunteun pikeun nyegah motor kabeungharan sareng kaduruk kusabab laju aliran anu ageung.
7. Nalika pompa cai dijalankeun, kaluaran cai kedah kontinyu sareng malah, arus kedah stabil (dina kaayaan kerja anu dipeunteun, umumna henteu langkung ti 10% tina arus anu dipeunteun), sareng teu kedah aya geter atanapi bising. Upami aya abnormalitas, mesin kedah dieureunkeun pikeun milari panyababna sareng ngaleungitkeunana.
8. Nalika masang, nengetan setelan tina kawat grounding motor (tingali Gambar 2). Nalika pipa cai nyaéta pipa baja, ngarah tina clamp wellhead; lamun pipa cai téh pipa plastik, ngarah tina tanda grounding tina pompa listrik.

When the submersible pump is installed, recheck the insulation resistance and three-phase connectivity of the switch, and check whether there is any error in the connection between the instrument and the starting equipment. If there is no problem, you can start the test machine. After starting, observe whether the indication reading of each instrument is correct. If the rated voltage and current specified on the nameplate are exceeded, observe whether the pump has any noise or vibration. If everything is normal, you can put into operation. After the first start of the pump for four hours, it should be closed and the thermal insulation resistance of the motor should be quickly tested. Its value should not be less than 0.5 megaohm. After stopping the pump, it should be restarted after a five-minute interval to prevent the water column in the pipeline from completely reversing, resulting in the motor burning due to excessive current. After the pump is put into normal operation, in order to prolong its service life, it is necessary to check regularly whether the supply voltage, working current and insulation resistance are normal. If the following conditions are found, the machine should be shut down immediately to eliminate the fault:

1.the current exceeds 20% under the rated working conditions.

2.the dynamic water level drops to the inlet section, resulting in intermittent drainage.

3.the submersible pump vibrates violently or emits huge noise.

4.the supply voltage is lower than 340 volts.

5.a fuse is blown out.

6.the water pipe is damaged.

7.the thermal insulation resistance of the motor to the ground is less than 0.5 megaohm.

When disassembling the unit:

1.lock the cable, take off the pipeline part, and remove the line protection plate.

2.unscrew the drain bolt, empty all the water in the motor chamber.

3.remove the filter, loosen the screw on the coupling fixed motor shaft.

4.unscrew the bolt connecting the water inlet section and the motor, and separate the pump and the motor (pay attention to the leveling unit when separating to prevent the bending of the pump shaft).

5.the disassembly sequence of the pump is: (see Figure 1) water inlet section, impeller, guide housing, rotor, impeller. Check the valve body. When removing the impeller, use special tools to loosen the conical sleeve fixed on the impeller. In the process of disassembly and assembly, avoid bending the pump shaft and damaging various parts.

6.the disassembly process of the motor is: (see Figure 1) put the motor on the platform, remove the nut, base, shaft head lock nut, thrust plate, key, lower guide rail, support seat, and tie rod bolt from the bottom of the motor in order, and then take out the rotor (be careful not to damage the wiring harness), and finally remove the connecting part and the upper guide rail bearing seat. When assembling the unit: before assembly, rust and dirt on each part should be cleaned and sealant coated on each mating surface and fastener, then assembled in reverse order of disassembly (motor shaft movement after assembly is about 1 mm), after assembly, coupling should be flexible, then put on the filter for testing. Each submersible pump running for one year, or if the running time is less than one year but has been immersed for two years, it must be disassembled and inspected according to Article 5 to replace worn parts.

 1, nempatkeun kaluar cai dina rohangan motor (utamana dina usum tiis pikeun nyegah motor ti katirisan), sarta dasi kabel ogé.

 2, store in an indoor room without corrosive substances and gases, with a temperature below 40 °C.

 3, pamakéan jangka panjang kedah nengetan pencegahan karat tina pompa submersible.

01 Asupan cai sumur jero

02 Pasokan cai luhur

03 suplai cai gunung 

04 cai munara

05 irigasi tatanén

06 irigasi kebon

07 asupan cai walungan

08 cai domestik