150QJP Peep Well Submersible Pump

QJP series special fountain pump is a fountain pump with higher efficiency developed by our factory. The motor core of the pump is made of high quality cold rolled silicon steel, which makes the pump have good magnetic permeability and will not produce heat when starting frequently. The two ends of the motor rotor are equipped with water-lubricated alloy copper sleeves instead of ball bearings, thus avoiding the problem of easy rust of ball bearings and burnout of motor due to lack of oil. 0JP series pump is also equipped with a variety of intelligent functions, such as over-temperature protection, anti-dry burning protection, etc., to ensure the safe operation of the pump. The pump is suitable for fountain decoration in landscape engineering, square, garden and other different occasions, providing users with efficient and reliable pumping solutions.

1, wutar lantarki: uku-lokaci AC 380V (haƙuri +/- 5%), 50HZ (haƙuri +/- 1%).

2, ingancin ruwa:

(1) zafin ruwa bai wuce 20 ° C ba;

(2) ƙaƙƙarfan abun ciki na ƙazanta (rabo mai yawa) bai fi 0.01% ba;

(3) ƙimar PH (pH) 6.5-8.5;

(4) abun ciki na hydrogen sulfide bai fi 1.5mg/L ba;

(5) abun ciki na chloride bai wuce 400mg/L ba.

3, an rufe motar ko tsarin jika mai cike da ruwa, kafin a yi amfani da kogon motar da ke ƙarƙashin ruwa dole ne ya kasance cike da ruwa mai tsafta, don hana cikar ƙarya, sannan a ɗaure allurar ruwa, kusoshi na sakin iska, in ba haka ba ba za a bari a yi amfani da su ba.

4, dole ne a nutse cikin ruwa gaba daya, zurfin nutsewar bai wuce 70m ba, kasan famfon mai jujjuyawar daga kasan rijiyar bai wuce 3m ba.

5, Ruwan rijiyar ruwa ya kamata ya iya saduwa da fitowar ruwan famfo mai jujjuyawar ruwa da ci gaba da aiki, ya kamata a sarrafa fitar da ruwan famfo mai ruwa a cikin 0.7 - 1.2 sau da yawa.

6, Rijiyar ta zama madaidaiciya, ba za a iya amfani da famfo mai ruwa ba ko zubar da shi, amfani da shi kawai a tsaye.

7, dole ne a daidaita famfo mai ruwa tare da kebul bisa ga buƙatun, da na'urar kariya ta wuce gona da iri.

8, an haramta famfo ba tare da na'urar gwajin ruwa ba

1, rijiya submersible famfo ga ruwa mai tsabta famfo, haramta sabon rijiyar, famfo laka da laka ruwa,

2, rijiyar famfo famfo irin ƙarfin lantarki sa 380/50HZ, da amfani da sauran irin ƙarfin lantarki maki na submersible Motors bukatar da za a musamman. Kebul na karkashin kasa dole ne ya yi amfani da kebul na ruwa mai hana ruwa, dole ne a sanye shi da kayan farawa, kamar akwatin rarrabawa, fara ba a shirye ba yakamata a yi amfani da cikakken aikin kariya na injin, kamar gajeriyar wuce gona da iri, kariyar lokaci, kariyar ƙarancin wuta, kariyar ƙasa, kariyar rashin aiki. , idan akwai yanayi mara kyau, na'urar kariyar yakamata ta kasance tafiya ta kan lokaci.

3, shigarwa da amfani da famfo dole ne a dogara da ƙasa, ya hana turawa da cirewa lokacin da hannaye da ƙafa suka jika, dole ne a yanke wutar lantarki kafin shigarwa da kuma kula da famfo, famfo yana amfani da wurin don saita " don hana girgiza wutar lantarki" bayyane alamun:

4, saukar da rijiyar ko kafin kafuwa, da kogon mota dole ne a cika da distilled ruwa ko mara-lalata tsaftataccen ruwan zãfi mai sanyi, ƙara ƙara / ruwa, famfo a kan ƙasa gwajin gudu, dole ne zuwa ga famfo jam'iyyar ruwa lubrication roba. bearings, nan take farawa bai wuce daƙiƙa guda ba, duba ko tuƙi ɗaya yake da umarnin tuƙi. Lokacin da famfo ya mike, kula da aminci, hana jujjuya rauni.

5, tsananin bisa ga tanadi na famfo daga, ya kwarara kewayon amfani, don hana low kwarara ko high daga famfo karfi, da tura qazanta da sauran sassa na lalacewa, da mota obalodi kone 6, bayan famfo saukar da rijiyar. ma'auni na motar zuwa ƙaƙƙarfan rufin ƙasa bai kamata ya zama ƙasa da 100M ba, bayan farawa don lura da ƙarfin lantarki da halin yanzu, duba kullun motar motsa jiki, ko daidai da bukatun; famfo ajiya wurin zafin jiki idan kasa da daskarewa batu, ya kamata a bushe da kogon mota ruwa, hana kogon mota ruwa ruwa kankara lalacewa lalacewa ta hanyar low zazzabi.

The pump part is mainly composed of pump shaft, impeller, flow guide housing, rubber bearing, check valve body (optional) and other parts. The motor part is mainly composed of base, pressure regulating diaphragm, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand discharging ring, water inlet section, lead cable and other parts. The main features of the product include: the motor is a water-filled wet submersible three-phase asynchronous motor, the motor cavity is filled with clear water for cooling the motor and lubricating the bearing, the pressure regulating diaphragm at the bottom of the motor is used to adjust the pressure difference caused by the heating of the motor. In order to prevent the sand in the well water from entering the motor, the upper end of the motor shaft extension is installed with two oil seals, and the sand discharging ring is installed to form a sand prevention structure. In order to avoid the pump shaft jumping when starting, the pump shaft is connected with the motor shaft through a coupling, and the thrust bearing is installed at the bottom of the motor. The lubrication of the motor and the pump bearing is water lubrication, and the stator winding of the motor uses high quality submersible motor wire with high insulation performance. The pump is designed by computer CAD, with simple structure and superior technical performance.

(1)Shiri kafin shigarwa:
1. Bincika ko famfo mai nutsewa ya dace da yanayin amfani da iyaka da aka ƙayyade a cikin littafin.
2. Yin amfani da maɗaukaki mai nauyi tare da diamita daidai da matsakaicin matsakaicin diamita na waje na famfo, auna ko inneldimeter na rijiyar zai iya dacewa da famfo mai ruwa, kuma auna ko zurfin rijiyar ya dace da bukatun shigarwa.
3. A duba ko rijiyar tana da tsafta da kuma ko ruwan rijiyar turbude ne. Kada a taɓa amfani da famfon lantarki mai nutsewa don wanke laka na welor da ruwan yashi don gujewa lalacewa da wuri ga famfon lantarki mai nisa.
4. Bincika ko matsayin mannen shigarwa na welhead ya dace kuma ko zai iya jure ingancin duka naúrar.
5. Bincika idan kayan aikin famfo na submersible sun cika kuma an shigar dasu yadda ya kamata bisa ga zanen taron da ke cikin littafin
6. Cire dunƙule ruwa kuma cika ramin motar da ruwa mai tsabta mara lalacewa (bayanin kula. Tabbatar da cika shi), sannan ƙara matse ruwan. Bayan sa'o'i 12 na allurar ruwa, juriyar juriya na motar kada ta zama ƙasa da 150M Q lokacin da aka auna tare da tebur girgiza 500V.
7. Cable haɗin gwiwa, yanke hannun riga na 120mm na roba daga ƙarshen kebul ɗin da ke fita da kuma kebul ɗin da ya dace da wukar na'urar lantarki sa'an nan kuma ya girgiza tsawon wayoyi guda uku a cikin siffar taku, a cire wani cibiya na jan karfe 20mm, goge oxide. Layer a gefen wayar tagulla tare da wuka ko yashi, sannan a saka ƙarshen waya biyu da aka haɗa a cikin palirs.Bayan daure Layer tam tare da lallausan wayar tagulla, sayar da shi sosai da ƙarfi, da yashi kowane. burrs a saman. Sa'an nan kuma, don haɗin gwiwa guda uku, yi amfani da tef ɗin rufewa na polyvester don nannade su a cikin wani ɗan ƙaramin tsari don lafazin uku. Kunna ƙarshen Layer ɗin biyu tare da zaren nyion, sa'an nan kuma yi amfani da hanyar da aka ɗora tazara don nannade tef ɗin don yadudduka uku. Kunna fitar da waje tare da tef ɗin rufewa mai ƙarfi don yadudduka uku. A ƙarshe, ninka nau'i-nau'i uku tare kuma kunsa su akai-akai don yadudduka biyar tare da babban tef. Kowane Layer dole ne a daure sosai, kuma haɗin haɗin haɗin gwiwar dole ne su kasance masu ƙarfi kuma su kasance masu ƙarfi don hana ruwa shiga da lalata rufin, Bayan nannade, jiƙa a cikin ruwa a cikin dakin da zafin jiki na 20 'c na tsawon awanni 12, sannan a auna juriya na rufi tare da tebur mai girgiza. , wanda bai kamata ya zama ƙasa da 100M Ω ba

Jadawalin tsarin aikin wayoyi na USB wanda aka makala shine kamar haka:

8. Yi amfani da multimeter don bincika ko an haɗa wayoyi masu hawa uku kuma ko juriyar DC ta kusan daidaita.
9. Bincika ko ikon kewayawa da na'ura mai canzawa sun yi yawa, sa'an nan kuma haɗa maɓallin kariya daga overload ko kayan farawa. Dubi Table 2 don takamaiman samfura, sa'an nan kuma Zuba guga na ruwa a cikin famfo na ruwa daga tashar famfo na ruwa don sa mai da igiya na roba a cikin famfo, sa'an nan kuma sanya famfo na lantarki da ke karkashin ruwa a tsaye kuma a tsaye. Fara (ba fiye da dakika ɗaya ba) kuma duba ko jagoran tuƙi ya yi daidai da alamar tuƙi. Idan ba haka ba, musanya kowane haɗe-haɗe biyu na kebul na zamani uku. Sannan shigar da tacewa kuma shirya don gangara rijiyar. Idan aka yi amfani da shi a lokuta na musamman (kamar ramuka, ramuka, koguna, tafkuna, tafkuna, da sauransu), famfon lantarki dole ne ya zama ƙasa da dogaro.

(2) Kayan aiki da kayan aiki:
1. Ɗaya daga cikin sarƙoƙi na ɗagawa don fiye da ton biyu.
2. Tafiya mai tsayi a tsaye wanda bai gaza mita hudu ba.
3. Igiyoyin rataye guda biyu ( igiyoyin waya ) waɗanda zasu iya ɗaukar nauyin fiye da ton ɗaya (za su iya ɗaukar nauyin cikakken saitin famfo na ruwa).
4. Shigar da nau'i-nau'i biyu na manne (splints).
5. Wrenches, guduma, screwdrivers, lantarki kayan aiki da kayan aiki, da dai sauransu.

(3) Shigar da famfun lantarki:
1. Shigarwa ta hanyar yin gwajin lantarki mai saukarwa an nuna shi a cikin Hoto na 2. Ana nuna takamaiman girma a cikin Table 3 "Jerin shigarwa girma na famfo mai saukarwa".

2. Za a iya ɗaga famfunan wutar lantarki da ke ƙarƙashin ƙasa da kai ƙasa da mita 30 kai tsaye a cikin rijiyar ta hanyar amfani da tudu da igiyoyin waya ko wasu igiyoyin hemp waɗanda za su iya ɗaukar cikakken nauyin injin gabaɗaya, bututun ruwa, da ruwa a cikin bututu.

3. Pumps tare da shugaban sama da mita 30 suna amfani da bututun ƙarfe, kuma tsarin shigarwa shine kamar haka:
①A yi amfani da matsi don matse ƙarshen ɓangaren fanfo na ruwa (motar da famfon ɗin an haɗa su a wannan lokacin), ɗaga shi da sarƙar rataye, a hankali daure shi a cikin rijiyar har sai a daka matsi a kan rijiyar a cire. sarkar rataye.
② Yi amfani da wani nau'i na manne guda biyu don matsa bututu, ɗaga shi tare da sarƙar rataye 15 cm daga flange, kuma rage shi a hankali. Tsakanin flange na bututu da famfo flange Saka robar kushin a wurin da kuma matsawa bututun da famfo daidai da kusoshi, goro da masu wankin bazara.
③ Ɗaga fam ɗin da ke ƙarƙashin ruwa kaɗan, cire matsi a saman ƙarshen famfon na ruwa, ɗaure kebul ɗin da ƙarfi ga bututun ruwa tare da tef ɗin filastik, sannan a daure ta ƙasa har sai an sanya matsi a bakin rijiyar.
④ Yi amfani da wannan hanyar don ɗaure duk bututun ruwa a cikin rijiyar.
⑤ Bayan an haɗa kebul na gubar da aka haɗa zuwa maɓallin sarrafawa, an haɗa shi da wutar lantarki na matakai uku.

(4) Abubuwan lura yayin shigarwa:
1. Idan an sami wani abin damuwa yayin aikin famfo, juya ko ja bututun ruwa don shawo kan matsewar. Idan har yanzu matakai daban-daban ba su yi aiki ba, don Allah kar a tilasta famfo ƙasa don guje wa lalacewa ga famfon lantarki da ke ƙarƙashin ruwa da rijiyar.
2. A lokacin shigarwa, ya kamata a sanya takalmin roba a gefen kowane bututu kuma a ɗaure shi daidai.
3. Idan aka saukar da famfon ruwa a cikin rijiyar, sai a sanya shi a tsakiyar bututun rijiyar don hana famfo yin gudu da bangon rijiyar na tsawon lokaci, wanda hakan zai sa fam ɗin ya yi rawar jiki, motar kuma ta share ta ƙone. .
4. Ƙayyade zurfin famfo na ruwa zuwa kasan rijiyar bisa ga yanayin yashi da yashi na rijiyar. Kada a binne famfo a cikin laka. Nisa daga famfon ruwa zuwa kasan rijiyar gabaɗaya bai wuce mita 3 ba (duba hoto na 2).
5. Zurfin shigar ruwa na famfo ruwa ya kamata ya zama ƙasa da mita 1-1.5 daga matakin ruwa mai ƙarfi zuwa kullin shigar ruwa (duba Hoto 2). In ba haka ba, famfo famfo na ruwa na iya lalacewa cikin sauƙi.
6. Tashin famfo na ruwa ba zai iya zama ƙasa da ƙasa ba. In ba haka ba, ana buƙatar shigar da bawul ɗin gate a kan bututun ruwa na rijiyar don sarrafa magudanar famfo a wurin da aka ƙididdige shi don hana yin lodin motar da ƙonewa saboda yawan kwararar ruwa.
7. Lokacin da famfo na ruwa ke gudana, fitar da ruwa ya kamata ya kasance mai ci gaba kuma har ma, halin yanzu ya kamata ya kasance mai ƙarfi (a karkashin yanayin aiki mai ƙima, gabaɗaya ba fiye da 10% na halin yanzu ba), kuma kada a yi rawar jiki ko amo. Idan akwai wata matsala, yakamata a dakatar da injin don gano dalilin da kuma kawar da shi.
8. Lokacin shigarwa, kula da saitin waya ta ƙasa (duba hoto 2). Lokacin da bututun ruwa ya kasance bututun ƙarfe, kai shi daga matsewar rijiyar; lokacin da bututun ruwa ya zama bututun filastik, kai shi daga alamar ƙasa na famfon lantarki.

When the submersible pump is installed, recheck the insulation resistance and three-phase connectivity of the switch, and check whether there is any error in the connection between the instrument and the starting equipment. If there is no problem, you can start the test machine. After starting, observe whether the indication reading of each instrument is correct. If the rated voltage and current specified on the nameplate are exceeded, observe whether the pump has any noise or vibration. If everything is normal, you can put into operation. After the first start of the pump for four hours, it should be closed and the thermal insulation resistance of the motor should be quickly tested. Its value should not be less than 0.5 megaohm. After stopping the pump, it should be restarted after a five-minute interval to prevent the water column in the pipeline from completely reversing, resulting in the motor burning due to excessive current. After the pump is put into normal operation, in order to prolong its service life, it is necessary to check regularly whether the supply voltage, working current and insulation resistance are normal. If the following conditions are found, the machine should be shut down immediately to eliminate the fault:

1.the current exceeds 20% under the rated working conditions.

2.the dynamic water level drops to the inlet section, resulting in intermittent drainage.

3.the submersible pump vibrates violently or emits huge noise.

4.the supply voltage is lower than 340 volts.

5.a fuse is blown out.

6.the water pipe is damaged.

7.the thermal insulation resistance of the motor to the ground is less than 0.5 megaohm.

When disassembling the unit:

1.lock the cable, take off the pipeline part, and remove the line protection plate.

2.unscrew the drain bolt, empty all the water in the motor chamber.

3.remove the filter, loosen the screw on the coupling fixed motor shaft.

4.unscrew the bolt connecting the water inlet section and the motor, and separate the pump and the motor (pay attention to the leveling unit when separating to prevent the bending of the pump shaft).

5.the disassembly sequence of the pump is: (see Figure 1) water inlet section, impeller, guide housing, rotor, impeller. Check the valve body. When removing the impeller, use special tools to loosen the conical sleeve fixed on the impeller. In the process of disassembly and assembly, avoid bending the pump shaft and damaging various parts.

6.the disassembly process of the motor is: (see Figure 1) put the motor on the platform, remove the nut, base, shaft head lock nut, thrust plate, key, lower guide rail, support seat, and tie rod bolt from the bottom of the motor in order, and then take out the rotor (be careful not to damage the wiring harness), and finally remove the connecting part and the upper guide rail bearing seat. When assembling the unit: before assembly, rust and dirt on each part should be cleaned and sealant coated on each mating surface and fastener, then assembled in reverse order of disassembly (motor shaft movement after assembly is about 1 mm), after assembly, coupling should be flexible, then put on the filter for testing. Each submersible pump running for one year, or if the running time is less than one year but has been immersed for two years, it must be disassembled and inspected according to Article 5 to replace worn parts.

 1, fitar da ruwa a cikin rami na motar (musamman a lokacin hunturu don hana motar daga daskarewa), kuma daure kebul ɗin da kyau.

 2, adana a cikin daki na cikin gida ba tare da lalata abubuwa da gas ba, tare da zafin jiki ƙasa da 40 ° C.

 3, dogon lokacin amfani ya kamata kula da tsatsa rigakafin submersible farashinsa.

01 Ruwa mai zurfi mai zurfi

02 Ruwa mai tsayi mai tsayi

03 ruwan tudu 

04 Tower ruwa

05 Noma ban ruwa

06 ban ruwa na lambu

07 ruwan kogi

08 ruwan gida