Ruwan Ruwa Mai Ruwa Mai Zurfi Rijiya

Nau'in famfo na buoyancy wanda aka ƙera zuwa famfo mai nutsewa a kwance, na'urar buoy, na'urar gyarawa, na'urar fitarwa da sauran haɗin haɗin gwiwa, gabaɗayan amfani da ruwa. Abvantbuwan amfãni: shigarwar sa yana da sauƙi da sauri, mai sauƙi don yin famfo, sauƙi don maye gurbin da kuma kula da famfo.Ya dace da koguna, tafkin ruwa na ruwa na ruwa, ayyukan injiniya na gaggawa na gaggawa suna buƙatar amsawa da sauri.Idan aka kwatanta da aikin injiniya na gargajiya na gargajiya, farashin farashin An ajiye aikin injiniyan farar hula, cikakken farashi yana da ƙasa, kuma aikin yana da ƙarfi.

Famfu na buoy na iya daidaita matsayinsa bisa ga canjin matakin ruwa, wanda koyaushe zai iya ajiye famfo mai nutsewa a wuri ɗaya a ƙarƙashin ruwa.

We are pleased to introduce our product, a three-phase AC 380V power supply (tolerance ± 5%), 50HZ (tolerance ± 1%) submersible pump. The product requires water quality meets the following conditions: water temperature is not higher than 20 °C; solid impurities content (mass ratio) is not greater than 0.01%; PH value (pH) is 6.5-8.5; hydrogen sulfide content is not more than 1.5mg/L; chloride ion content is not greater than 400mg/L. The motor adopts a closed or water immersion wet structure. Before use, the inner cavity of the submersible motor needs to be filled with clean water to prevent mistakes. And the water injection and exhaust bolts need to be tightened, otherwise it can not be used. The submersible pump must be completely immersed in water to work, the immersion depth shall not exceed 70 meters, and the distance between the bottom of the submersible pump and the bottom of the well shall not be less than 3 meters. The well water flow should be able to meet the water output and continuous operation of the submersible pump, and the water output of the submersible pump shall be controlled at 0.7-1.2 times of the rated flow. The well must be vertical, and the submersible pump can not be used horizontally or inclined, but only vertically. The submersible pump must match the cable according to the requirements and be equipped with external overload protection device. The pump is strictly prohibited from no-load test without water. This product is suitable for a variety of demanding pump working environment, guaranteeing efficient and stable operation, which is your ideal choice.

Duk samfuran za a iya keɓance su, da fatan za a tuntuɓe mu don cikakkun bayanai.

1, rijiya submersible famfo ga ruwa mai tsabta famfo, haramta sabon rijiyar, famfo laka da laka ruwa,

2, rijiyar famfo famfo irin ƙarfin lantarki sa 380/50HZ, da amfani da sauran irin ƙarfin lantarki maki na submersible Motors bukatar da za a musamman. Kebul na karkashin kasa dole ne ya yi amfani da kebul na ruwa mai hana ruwa, dole ne a sanye shi da kayan farawa, kamar akwatin rarrabawa, fara ba a shirye ba yakamata a yi amfani da cikakken aikin kariya na injin, kamar gajeriyar wuce gona da iri, kariyar lokaci, kariyar ƙarancin wuta, kariyar ƙasa, kariyar rashin aiki. , idan akwai yanayi mara kyau, na'urar kariyar yakamata ta kasance tafiya ta kan lokaci.

3, shigarwa da amfani da famfo dole ne a dogara da ƙasa, ya hana turawa da cirewa lokacin da hannaye da ƙafa suka jika, dole ne a yanke wutar lantarki kafin shigarwa da kuma kula da famfo, famfo yana amfani da wurin don saita " don hana girgiza wutar lantarki" bayyane alamun:

4, saukar da rijiyar ko kafin kafuwa, da kogon mota dole ne a cika da distilled ruwa ko mara-lalata tsaftataccen ruwan zãfi mai sanyi, ƙara ƙara / ruwa, famfo a kan ƙasa gwajin gudu, dole ne zuwa ga famfo jam'iyyar ruwa lubrication roba. bearings, nan take farawa bai wuce daƙiƙa guda ba, duba ko tuƙi ɗaya yake da umarnin tuƙi. Lokacin da famfo ya mike, kula da aminci, hana jujjuya rauni.

5, tsananin bisa ga tanadi na famfo daga, kwarara kewayon amfani, don hana low kwarara ko high daga yin famfo karfi, da tura hali da sauran sassa na lalacewa, da mota obalodi kone.

6, bayan famfo saukar da rijiyar, ma'aunin motar zuwa juriya na ƙasa bai kamata ya zama ƙasa da 100M ba, bayan farawa don lura da ƙarfin lantarki da na yanzu, duba murfin iska na motar, ko daidai da bukatun; famfo ajiya wurin zafin jiki idan kasa da daskarewa batu, ya kamata a bushe da ruwa a cikin kogon mota, hana motor rami ruwa kankara lalacewa lalacewa ta hanyar low zazzabi.

 Brief gabatarwar tsarin: famfo part ne yafi hada da famfo shaft, impeller, karkatarwa harsashi, roba hali, duba bawul jiki (na zaɓi sassa) da sauran components.Motor part ne yafi hada da tushe, matsa lamba regulating film, tura bearing, tura farantin. , Ƙananan wurin zama mai jagoran jagora, stator, rotor, kujera mai jagora na sama, zoben yashi, sashin shigar ruwa, kebul da sauran abubuwan da aka gyara.

Babban fasali na samfurin sun haɗa da:

1, Motar ne mai jika mai cike da ruwa mai cike da ruwa mai cike da ruwa guda uku asynchronous motor, kogon motar yana cike da ruwa mai tsafta, ana amfani da shi don sanyaya motar da mai mai ɗaukar nauyi, ana amfani da fim ɗin daidaita matsi a ƙasan motar don daidaitawa. bambancin matsa lamba da fadadawa da matsa lamba na ruwa a cikin jiki wanda ya haifar da canjin yanayin zafi na motar.

 2, Don hana yashi a cikin rijiyar ruwa daga shiga cikin motar, babban ƙarshen motar motar yana sanye da hatimin mai guda biyu, kuma an sanya zoben yashi don samar da tsarin rigakafin yashi.

 3, Domin hana fam ɗin famfo daga tashi sama lokacin farawa, ana haɗa fam ɗin famfo da injin motar ta hanyar haɗin gwiwa, kuma an shigar da madaidaicin matsa lamba a ƙasan ɓangaren motar.

 4, The lubrication na mota da famfo hali ne ruwa lubrication.

 5, The motor stator winding da aka yi da high quality submersible motor winding waya, tare da high rufi yi.

 6, An tsara famfo ta kwamfuta CAD, tare da tsari mai sauƙi da kyakkyawan aikin fasaha.

(1)Shiri kafin shigarwa:
1. Bincika ko famfo mai nutsewa ya dace da yanayin amfani da iyaka da aka ƙayyade a cikin littafin.
2. Yin amfani da maɗaukaki mai nauyi tare da diamita daidai da matsakaicin matsakaicin diamita na waje na famfo, auna ko inneldimeter na rijiyar zai iya dacewa da famfo mai ruwa, kuma auna ko zurfin rijiyar ya dace da bukatun shigarwa.
3. A duba ko rijiyar tana da tsafta da kuma ko ruwan rijiyar turbude ne. Kada a taɓa amfani da famfon lantarki mai nutsewa don wanke laka na welor da ruwan yashi don gujewa lalacewa da wuri ga famfon lantarki mai nisa.
4. Bincika ko matsayin mannen shigarwa na welhead ya dace kuma ko zai iya jure ingancin duka naúrar.
5. Bincika idan kayan aikin famfo na submersible sun cika kuma an shigar dasu yadda ya kamata bisa ga zanen taron da ke cikin littafin
6. Cire dunƙule ruwa kuma cika ramin motar da ruwa mai tsabta mara lalacewa (bayanin kula. Tabbatar da cika shi), sannan ƙara matse ruwan. Bayan sa'o'i 12 na allurar ruwa, juriyar juriya na motar kada ta zama ƙasa da 150M Q lokacin da aka auna tare da tebur girgiza 500V.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

Jadawalin tsarin aikin wayoyi na USB wanda aka makala shine kamar haka:

8. Yi amfani da multimeter don bincika ko an haɗa wayoyi masu hawa uku kuma ko juriyar DC ta kusan daidaita.
9. Bincika ko ikon kewayawa da na'ura mai canzawa sun yi yawa, sa'an nan kuma haɗa maɓallin kariya daga overload ko kayan farawa. Dubi Table 2 don takamaiman samfura, sa'an nan kuma Zuba guga na ruwa a cikin famfo na ruwa daga tashar famfo na ruwa don sa mai da igiya na roba a cikin famfo, sa'an nan kuma sanya famfo na lantarki da ke karkashin ruwa a tsaye kuma a tsaye. Fara (ba fiye da dakika ɗaya ba) kuma duba ko jagoran tuƙi ya yi daidai da alamar tuƙi. Idan ba haka ba, musanya kowane haɗe-haɗe biyu na kebul na zamani uku. Sannan shigar da tacewa kuma shirya don gangara rijiyar. Idan aka yi amfani da shi a lokuta na musamman (kamar ramuka, ramuka, koguna, tafkuna, tafkuna, da sauransu), famfon lantarki dole ne ya zama ƙasa da dogaro.

(2) Kayan aiki da kayan aiki:
1. Ɗaya daga cikin sarƙoƙi na ɗagawa don fiye da ton biyu.
2. Tafiya mai tsayi a tsaye wanda bai gaza mita hudu ba.
3. Igiyoyin rataye guda biyu ( igiyoyin waya ) waɗanda zasu iya ɗaukar nauyin fiye da ton ɗaya (za su iya ɗaukar nauyin cikakken saitin famfo na ruwa).
4. Shigar da nau'i-nau'i biyu na manne (splints).
5. Wrenches, guduma, screwdrivers, lantarki kayan aiki da kayan aiki, da dai sauransu.

(3) Shigar da famfun lantarki:
1. Shigarwa ta hanyar yin gwajin lantarki mai saukarwa an nuna shi a cikin Hoto na 2. Ana nuna takamaiman girma a cikin Table 3 "Jerin shigarwa girma na famfo mai saukarwa".

2. Za a iya ɗaga famfunan wutar lantarki da ke ƙarƙashin ƙasa da kai ƙasa da mita 30 kai tsaye a cikin rijiyar ta hanyar amfani da tudu da igiyoyin waya ko wasu igiyoyin hemp waɗanda za su iya ɗaukar cikakken nauyin injin gabaɗaya, bututun ruwa, da ruwa a cikin bututu.

3. Pumps tare da shugaban sama da mita 30 suna amfani da bututun ƙarfe, kuma tsarin shigarwa shine kamar haka:
①A yi amfani da matsi don matse ƙarshen ɓangaren fanfo na ruwa (motar da famfon ɗin an haɗa su a wannan lokacin), ɗaga shi da sarƙar rataye, a hankali daure shi a cikin rijiyar har sai a daka matsi a kan rijiyar a cire. sarkar rataye.
②A yi amfani da wani nau'i na ƙugiya don ɗaure bututu, ɗaga shi da sarƙar rataye 15 cm nesa da flange, kuma rage shi a hankali. Tsakanin flange na bututu da famfo flange Saka robar kushin a wurin da kuma matsawa bututun da famfo daidai da kusoshi, goro da masu wankin bazara.
③Ɗaga fam ɗin da ke ƙarƙashin ruwa kaɗan, cire matsi a saman ƙarshen famfon na ruwa, ɗaure kebul ɗin da ƙarfi ga bututun ruwa tare da tef ɗin filastik, a hankali daure ta ƙasa har sai an sanya matsi a bakin rijiyar.
④ Yi amfani da wannan hanyar don ɗaure duk bututun ruwa a cikin rijiyar.
⑤ Bayan an haɗa kebul na gubar da aka haɗa zuwa maɓallin sarrafawa, an haɗa shi da wutar lantarki na matakai uku.

(4) Abubuwan lura yayin shigarwa:
1. Idan an sami wani abin damuwa yayin aikin famfo, juya ko ja bututun ruwa don shawo kan matsewar. Idan har yanzu matakai daban-daban ba su yi aiki ba, don Allah kar a tilasta famfo ƙasa don guje wa lalacewa ga famfon lantarki da ke ƙarƙashin ruwa da rijiyar.
2. A lokacin shigarwa, ya kamata a sanya takalmin roba a gefen kowane bututu kuma a ɗaure shi daidai.
3. Idan aka saukar da famfon ruwa a cikin rijiyar, sai a sanya shi a tsakiyar bututun rijiyar don hana famfo yin gudu da bangon rijiyar na tsawon lokaci, wanda hakan zai sa fam ɗin ya yi rawar jiki, motar kuma ta share ta ƙone. .
4. Ƙayyade zurfin famfo na ruwa zuwa kasan rijiyar bisa ga yanayin yashi da yashi na rijiyar. Kada a binne famfo a cikin laka. Nisa daga famfon ruwa zuwa kasan rijiyar gabaɗaya bai wuce mita 3 ba (duba hoto na 2).
5. Zurfin shigar ruwa na famfo ruwa ya kamata ya zama ƙasa da mita 1-1.5 daga matakin ruwa mai ƙarfi zuwa kullin shigar ruwa (duba Hoto 2). In ba haka ba, famfo famfo na ruwa na iya lalacewa cikin sauƙi.
6. Tashin famfo na ruwa ba zai iya zama ƙasa da ƙasa ba. In ba haka ba, ana buƙatar shigar da bawul ɗin gate a kan bututun ruwa na rijiyar don sarrafa magudanar famfo a wurin da aka ƙididdige shi don hana yin lodin motar da ƙonewa saboda yawan kwararar ruwa.
7. Lokacin da famfo na ruwa ke gudana, fitar da ruwa ya kamata ya kasance mai ci gaba kuma har ma, halin yanzu ya kamata ya kasance mai ƙarfi (a karkashin yanayin aiki mai ƙima, gabaɗaya ba fiye da 10% na halin yanzu ba), kuma kada a yi rawar jiki ko amo. Idan akwai wata matsala, yakamata a dakatar da injin don gano dalilin da kuma kawar da shi.
8. Lokacin shigarwa, kula da saitin waya ta ƙasa (duba hoto 2). Lokacin da bututun ruwa ya kasance bututun ƙarfe, kai shi daga matsewar rijiyar; lokacin da bututun ruwa ya zama bututun filastik, kai shi daga alamar ƙasa na famfon lantarki.

• 1 Submersible famfo shigarwa ya cika, sake duba juriya na kariya da kuma tafiyar matakai guda uku daga sauyawa, duba kayan aiki kuma fara kuskuren haɗin kayan aiki, idan babu matsala, zai iya fara gwajin gwaji, bayan farawa na kayan aiki. yana nuna karatuttukan ko fiye da lambar sunan da aka ƙulla ƙididdige ƙimar ƙarfin lantarki da na yanzu, lura da hayaniyar famfo da yanayin jijjiga, duk abin da ke al'ada za a iya saka shi cikin aiki.
• 2 aikin famfo na farko na sa'o'i hudu na farko, ya kamata a rufe da sauri gwada juriya na thermal na motar, ƙimar kada ta kasance ƙasa da 0.5 megaohm.
• 3 famfo kashewa, ya kamata tazara minti biyar bayan da farko, hana ruwa shafi a cikin bututu ba gaba daya reflux da kuma haifar da motor halin yanzu yana da girma da kuma konewa.
• 4 famfo cikin aiki na yau da kullun, don tsawaita rayuwar sabis ɗin, don bincika ƙarfin wutar lantarki, aiki na yanzu da juriya na rufi al'ada ne, idan an sami yanayi mai zuwa, nan da nan ya kamata a rufe matsalar.
•  
• - a cikin yanayin da aka ƙididdigewa, halin yanzu ya fi 20%.
• - matakin ruwa mai ƙarfi zuwa sashin shigar ruwa, yana haifar da ruwa mai tsaka-tsaki.
• - submersible famfo mai tsananin girgiza ko amo.
• - ƙarfin wutar lantarki yana ƙasa da 340 volts.
• - fuse ya ƙone wani lokaci.
• - lalacewar bututun ruwa.
• - Motar zuwa juriya na thermal rufi bai wuce 0.5 megaohm ba.
•  
• 5 wannan samfurin yana da halaye na rarrabuwa mai sauƙi, ana iya rarraba su ta matakai masu sauƙi.
• Matakan kwancewa sun haɗa da: 1 kwance igiyar igiya, cire kayan aikin bututun da farantin kariyar layi. 2 dunƙule magudanar ruwan fitar da ruwa sannan a fitar da duk ruwan da ke cikin ɗakin motar. 3 cire tacewa da sassauta dunƙule gyare-gyare akan haɗaɗɗen haɗakarwa da aka gyara zuwa mashin motar. 4 dunƙule ƙasa a cikin kulle da ke haɗa sashin shigar ruwa da injin, kuma raba famfo da injin (ku kula don kiyaye sashin a kwance don hana lanƙwasawa na bututun famfo lokacin rabuwa). 5 jerin rarraba famfo shine: (duba Hoto 1) ɓangaren shigar ruwa, impeller, shunt shell, impeller, duba bawul jiki.
• Lokacin cire impeller, yi amfani da kayan aiki na musamman don sassauta riƙon hannun rigar da ke gyara impeller. A cikin aiwatar da rarrabuwa, kauce wa lankwasa famfo da lalata abubuwa daban-daban.
• 6 tsarin rushewar motar shine: (duba Hoto 1) sanya motar a kan dandamali, sannan cire goro a kan kusoshi (jawo sandar sanda), tushe, madaidaicin madauri na kulle, farantin turawa, maɓalli, ƙananan jagorar dogo, dan kadan ya lalace) sannan a karshe cire bangaren hadawa da wurin zama na dogo na jagora na sama.
• 7 naúrar taro: kafin taro ya kamata a tsaftace tsatsa da datti na kowane bangare, kuma a yi amfani da sealant a kan kowane mating surface da fastener, sa'an nan a gudanar da taron a cikin juyi tsari na wargajewa (motsi na mota). shaft bayan taro ya kai kusan millimita daya), bayan an gama taron, sai a rika jujjuyawa a hankali, sannan a sanya tacewa don gwaji.6. Za a fitar da famfunan da ke ƙarƙashin ruwa daga cikin rijiyar don tarwatsawa da kuma kula da su bisa ga sashi na 5 bayan shekara guda na aiki, ko ƙasa da shekara guda na aiki amma shekaru biyu na lokacin nutsewa, kuma za a maye gurbin abubuwan da aka sawa.

 1, fitar da ruwa a cikin rami na motar (musamman a lokacin hunturu don hana motar daga daskarewa), kuma daure kebul ɗin da kyau.

 2, store in an indoor room without corrosive substances and gases, with a temperature below 40 °C.

 3, dogon lokacin amfani ya kamata kula da tsatsa rigakafin submersible farashinsa.

01 Ruwa mai zurfi mai zurfi

02 Ruwa mai tsayi mai tsayi

03 ruwan tudu 

04 Tower ruwa

05 Noma ban ruwa

06 ban ruwa na lambu

07 ruwan kogi

08 ruwan gida