150QJR Pum Waiwai Hohonu

Designed for underground hot water mining below 100°C, this product has the characteristics of high temperature resistance, corrosion resistance and aging resistance. Whether in underground mining or other hot water environment applications, it can effectively resist the challenges of harsh environment. Its excellent performance and stable quality make it an ideal choice in the mining field.

1, mana lako: ʻekolu-phase AC 380V (hoʻomanawanui + / - 5%), 50HZ (hoʻomanawanui + / - 1%).

2, ka maikaʻi o ka wai:

(1) water temperature is not higher than 20 °C;

(2) ʻaʻole ʻoi aku ka nui o nā mea haumia paʻa (mass ratio) ma mua o 0.01%;

(3) Waiwai PH (pH) 6.5-8.5;

(4) ʻAʻole ʻoi aku ka nui o ka hydrogen sulfide ma mua o 1.5mg/L;

(5) ʻAʻole ʻoi aku ka nui o ka ʻona chloride ma mua o 400mg/L.

3, pani ʻia ka mīkini a i ʻole ka wai i piha i ka wai, ma mua o ka hoʻohana ʻana i ka lua kaʻa submersible pono e piha i ka wai maʻemaʻe, i mea e pale ai i ka hoʻopunipuni piha, a laila hoʻopaʻa i ka wai wai, hoʻokuʻu i nā bolts ea, inā ʻaʻole ʻae ʻia e hoʻohana.

4, pono e hoʻopiha piha ʻia ka pauma submersible i ka wai, ʻaʻole ʻoi aku ka hohonu o ka luʻu ʻana ma mua o 70m, ʻo ka lalo o ka paila submersible mai lalo o ka luawai ʻaʻole i emi iho ma mua o 3m.

5, hiki i ka wai punawai ke hoʻokō i ka hoʻopuka ʻana o ka wai paila submersible a me ka hoʻomau ʻana i ka hana, pono e hoʻokele ʻia ka hoʻopuka wai wai submersible ma 0.7 - 1.2 mau manawa o ka kahe i helu ʻia.

6, pono e pololei ka luawai, ʻaʻole hiki ke hoʻohana ʻia ka pauma submersible a hoʻolei ʻia, hoʻohana kū pololei wale nō.

7, pono e hoʻohālikelike ʻia ka pauma submersible me ke kaula e like me nā koi, a me ka ʻōnaehana pale overload waho. 8, pāpā loa ʻia ka paila me ka ʻole o ka mīkini hoʻāʻo wai ʻole

 The well submersible pump is a kind of pump suitable for clean water. It is strictly prohibited to dig new wells and extract sediment and turbid water. The voltage grade of the pump is 380/50HZ, and other submersible motors with different voltage grades need to be customized. Underground cables must be waterproof and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have conventional comprehensive motor protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and no-load protection. In abnormal cases, the protection device should be tripped in time. During installation and use, it is necessary to ensure that the pump is reliably grounded. It is forbidden to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. In the place where the pump is used, an obvious "anti-electric shock" sign must be set up. Before going down the well or installing the motor, the internal chamber must be filled with distilled water or non-corrosive clean cold water. The water adding/discharge bolt must be tightened. When testing the pump on the ground, water must be poured into the pump chamber to lubricate the rubber bearings. The instant start should not exceed one second to check whether the direction is correct, the same as the steering indication. Pay attention to safety when the pump is upright to prevent overturning and injury. Strictly in accordance with the provisions of the pump lift and flow range of use, to prevent the pump in low lift has a large flow or in high lift has a large pull, resulting in extreme wear of thrust bearings and other components, resulting in motor overload burnout. After the pump into the well, the insulation resistance of the motor and the ground shall be measured, which shall not be less than 100MΩ. After the start, observe the voltage and current regularly, and check whether the motor winding insulation meets the requirements; if the temperature of the pump storage location is below the freezing point, the water in the motor cavity shall be discharged to prevent freezing damage to the motor.

ʻO ka hoʻomaka pōkole o ka hoʻolālā: ʻo ka ʻāpana pauma ka mea nui o ka pump shaft, impeller, diversion shell, rubber bearing, check valve body (nā ʻāpana koho) a me nā mea ʻē aʻe. ʻO ka ʻāpana kaʻa ka mea nui i hoʻokumu ʻia me ka base, kaomi hoʻoponopono kiʻiʻoniʻoni, pahu pahu, pahu pahu, ka noho alakaʻi haʻahaʻa haʻahaʻa, stator, rotor, alakaʻi alakaʻi i luna noho, one apo, ʻāpana wai komo, kelepona a me nā mea ʻē aʻe.

ʻO nā hiʻohiʻona nui o ka huahana:

 1, ʻO ke kaʻa he wai piha piha i ka wai submersible ʻekolu-phase asynchronous motor, piha ka pahu kaʻa i ka wai maʻemaʻe, hoʻohana ʻia e hōʻoluʻolu i ka mīkini a lubricate i ka bearing, hoʻohana ʻia ke kiʻi hoʻoponopono kaomi ma lalo o ka kaʻa e hoʻoponopono. ka hoʻonui a me ka ʻokoʻa o ke kaomi ʻana o ka wai i loko o ke kino ma muli o ka hoʻololi ʻana o ka piʻi ʻana o ka wela o ke kaʻa.

 2, I mea e pale aku ai i ke one i loko o ka wai punawai mai ke komo ʻana i ke kaʻa, ua hoʻolako ʻia ka ʻaoʻao o luna o ka pahu kaʻa me nā sila ʻaila ʻelua, a ua hoʻokomo ʻia kahi apo one e hana i kahi ʻano pale one.

 3, I mea e pale ʻole ai i ka holo ʻana o ka pahu pāpaʻi i ka wā e hoʻomaka ai, ua hoʻopili ʻia ka pahu pāpaʻi a me ka pahu kaʻa e ka hui ʻana, a ua hoʻokomo ʻia kahi pahu pahu kiʻekiʻe ma ka ʻaoʻao haʻahaʻa o ke kaʻa.

 4, ʻO ka lubrication o ka kaʻa a me ka pahū pahū he wai lubrication.

 5, Hana ʻia ka wili kaʻa kaʻa stator me ke ʻano kiʻekiʻe o ka submersible motor winding wire, me ka hana insulation kiʻekiʻe.

 6, Hoʻolālā ʻia ka paila e ka CAD kamepiula, me ka hana maʻalahi a me ka hana ʻenehana maikaʻi.

(1) Hoʻomākaukau ma mua o ke kau ʻana:
1. E nānā inā kūpono ka pauma submersible i nā kūlana hoʻohana a me ka laulā i ʻōlelo ʻia ma ka manual.
2. Ma ka hoʻohana ʻana i kahi obiect kaumaha me ke anawaena e like me ke anawaena o waho loa o ka pauma hoʻohaʻahaʻa, e ana inā hiki i ka inneldiameter o ka luawai ke hoʻokomo i ka pauma hoʻoheheʻe ʻia, a e ana i ka hoʻokō ʻana o ka hohonu i nā koi hoʻokomo.
3. E nānā i ka maʻemaʻe o ka luawai a me ka wai o ka pūnāwai. Mai hoʻohana i ka pauma uila e holoi ai i ka ʻōpala welor a me ka wai one no ka pale ʻana i ka pōʻino mua o ka pauma uila.
4. E nānā inā kūpono ke kūlana o ka hoʻopili welhead a inā hiki iā ia ke kū i ke kūlana o ka ʻāpana holoʻokoʻa.
5. E nānā inā ua paʻa a hoʻokomo pono ʻia nā ʻāpana pauma submersible e like me ke kiʻikuhi hui ma ka manual.
6. Wehe i ka wili wai a hoʻopiha i ka lua kaʻa me ka wai maʻemaʻe, ʻaʻole ʻino (e hoʻomaopopo. Ma hope o 12 mau hola o ka wai ʻana, ʻaʻole pono e emi ka pale insulation o ke kaʻa ma mua o 150M Q ke ana ʻia me kahi papa haʻalulu 500V.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

ʻO ke kiʻikuhi kaʻina hana uwila i hoʻopili ʻia penei:

8. E hoʻohana i ka multimeter no ka nānā ʻana inā pili ʻia nā uea ʻekolu ʻāpana a inā ʻaʻole kaulike ke kūpaʻa DC.
9. E nānā inā ua hoʻonui ʻia ka mana kaapuni a me ka mea hoʻololi, a laila hoʻohui i ke kī hoʻomalu overload a i ʻole nā ​​mea hoʻomaka. E nānā i ka Papa 2 no nā hi'ohi'ona kiko'ī, a laila, e ninini i ka bākeke wai i loko o ka pā wai mai ka puka wai e ho'oma'ama'a i ka pahu pahu i loko o ka pama, a laila e kau i ka pauma uwila i lalo i luna a pa'a. a e nānā inā pili ka hoʻokele me ka hōʻailona hoʻokele. Inā ʻaʻole, e hoʻololi i nā mea hoʻohui ʻelua o ke kaula ʻekolu. Inā hoʻohana ʻia i nā hanana kūikawā (e like me nā ʻauwai, nā ʻauwai, nā muliwai, nā loko, nā loko, a me nā mea ʻē aʻe), pono e hoʻopaʻa ʻia ka paila uila.

(2) Mea hoʻokomo a me nā mea hana:
1. Hoʻokahi mau kaulahao hāpai no ʻelua mau tona.
2. ʻO kahi tripod me ke kiʻekiʻe kū i lalo o ʻehā mau mika.
3. ʻElua kaula kau (wire ropes) hiki ke kaumaha i ke kaumaha ma mua o hoʻokahi tona (hiki ke halihali i ke kaumaha o ka pahu wai piha).
4. E hoʻouka i ʻelua mau paʻi (splints).
5. Nā wrenches, hammers, screwdrivers, uila a me nā mea kani, etc.

(3) Hoʻokomo ʻia ka pauma uila:
1. Hōʻike ʻia ke kiʻikuhi hoʻonohonoho o ka pauma uila submersible ma ka Figure 2. Hōʻike ʻia nā ana hoʻonohonoho kikoʻī ma ka Papa 3 "List of Installation Dimensions of the Submersible Electric Pump".

2. Hiki ke hoʻokiʻekiʻe pololei ʻia nā paila uila me ke poʻo ma lalo o 30 mika i loko o ka pūnāwai me ka hoʻohana ʻana i nā paipu a me nā kaula uwea a i ʻole nā ​​kaula hemp ʻē aʻe e hiki ai ke halihali i ke kaumaha piha o ka mīkini holoʻokoʻa, nā paipu wai, a me ka wai i loko o nā paipu.

3. ʻO nā pumps me ke poʻo i ʻoi aku ma mua o 30 mika e hoʻohana i nā paipu kila, a penei ka hoʻonohonoho ʻana:
①E hoʻohana i kahi pipili no ka hoʻopaʻa ʻana i ka ʻaoʻao o luna o ka ʻaoʻao o ka pauma wai (ua hoʻopili ʻia ke kaʻa a me ka pauma wai i kēia manawa), e hoʻokiʻekiʻe me ke kaulahao e kau ana, a nakinaki mālie i loko o ka luawai a kau i ka paʻi ma ke poʻo punawai a wehe i ke kaulahao. kaulahao e kau ana.
② E hoʻohana i nā paipu ʻē aʻe e hoʻopaʻa i ka paipu, e hoʻokiʻekiʻe me ke kaulahao e kau ana ma kahi mamao o 15 knm mai ka lehelehe, a e hoʻohaʻahaʻa mālie. Ma waena o ka flange paipu a me ka flange pump E hoʻopaʻa i ka pā hao a hoʻopaʻa i ka paipu a paʻa pono me nā bolts, nati a me nā mea holoi puna.
③ E hoʻokiʻekiʻe iki i ka pauma hoʻohaʻahaʻa, e wehe i ke kaula ma ka ʻaoʻao o luna o ka pā wai, e hoʻopaʻa paʻa i ke kaula i ka paipu wai me ka lipine plastik, a nakinaki mālie i lalo a kau ʻia ka paʻi ma ka luawai.
④E hoʻohana i ke ʻano like e hoʻopaʻa ai i nā paipu wai a pau i loko o ka pūnāwai.
⑤Ma hope o ka hoʻopili ʻia ʻana o ke kaula alakaʻi i waho i ka hoʻololi mana, ua hoʻopili ʻia i ka lako mana ʻekolu.

(4) Nā mea e nānā ai i ka wā e hoʻokomo ai:
1. Inā ʻike ʻia kahi mea hoʻopuʻi i ka wā o ka pahū ʻana, e hoʻohuli a huki paha i ka paipu wai no ka lanakila ʻana i ke kiko pahu. Inā ʻaʻole e holo nā ʻano hana like ʻole, e ʻoluʻolu, mai hoʻoikaika i ka pamu i lalo e pale aku i ka pōʻino o ka pauma uila a me ka luawai.
2. I ka wā o ka hoʻokomo ʻana, pono e kau ʻia kahi pā hao ma ka ʻaoʻao o kēlā me kēia paipu a paʻa pono.
3. Ke hoʻohaʻahaʻa ʻia ka paila wai i loko o ka pūnāwai, pono e hoʻokomo ʻia i waenakonu o ka paipu pūnāwai i mea e pale ai i ka holo ʻana o ka pamu i ka paia o ka pūnāwai no ka manawa lōʻihi, e hoʻonāwaliwali ai ka pamu a e kahili a wela ke kaʻa. .
4. E hoʻoholo i ka hohonu o ka paila wai a hiki i lalo o ka luawai e like me ke kahe ʻana o ke one a me ka lepo o ka luawai. Mai kanu i ka pamu i ka lepo. ʻO ka mamao mai ka pā wai a hiki i lalo o ka pūnāwai ʻaʻole i emi iho ma mua o 3 mika (e nānā i ke Kiʻi 2).
5. ʻAʻole emi ka hohonu o ke komo ʻana o ka wai ma lalo o 1-1.5 mika mai ke kiʻekiʻe o ka wai ikaika a hiki i ka node inlet wai (e nānā i ke Kiʻi 2). Inā ʻaʻole, hiki ke pohō maʻalahi nā bearings pump wai.
6. ʻAʻole hiki ke haʻahaʻa loa ka hāpai ʻana o ka paila wai. A i ʻole, pono e hoʻokomo ʻia kahi valve puka ma luna o ka pipeline wai punawai e hoʻomalu i ke kahe ʻana o ka paila ma ka helu kahe i helu ʻia e pale ai i ka hoʻonui ʻia ʻana o ke kaʻa a puhi ʻia ma muli o nā kahe kahe nui.
7. I ka holo ana o ka pauma wai, pono e hoomau ka puka ana o ka wai a me ke ano, pono ke kupaa (ma lalo o na kulana hana i heluia, ma ke ano, aole oi aku mamua o 10% o ka manawa i heluia), a aole e haalulu a walawala. Inā loaʻa kekahi mea ʻino, pono ke kāpae ʻia ka mīkini e ʻike i ke kumu a hoʻopau.
8. I ka wā e hoʻokomo ai, e hoʻolohe i ka hoʻonohonoho ʻana o ka uea hoʻopaʻa ʻia kaʻa (e nānā i ke Kiʻi 2). Inā he paipu kila ka paipu wai, e alakaʻi iā ia mai ka puʻu punawai; inā he paipu plastik ka paipu wai, e alakaʻi iā ia mai ka hōʻailona kumu o ka paila uila.

• 1. Ma hope o ka hoʻokomo ʻia ʻana o ka pauma submersible, e nānā i ke kūpaʻa insulation a me ka conduction ʻekolu-phase mai ka hoʻololi hou ʻana, e nānā inā hewa ka mea kani a me ka pilina o nā mea hoʻomaka, inā ʻaʻohe pilikia, hiki ke hoʻomaka ka mīkini hoʻokolokolo, a e nānā inā ʻoi aku ka nui o ka helu helu ʻana o ka mea kani i ka volta helu a me kēia manawa i kuhikuhi ʻia ma ka papa inoa ma hope o ka hoʻomaka ʻana, a nānā inā he walaʻau a me ka haʻalulu ʻana o ka pamu, a hoʻokomo i ka hana inā maʻamau nā mea a pau.
• 2. Ma hope o ka hana mua o ka paila no nā hola ʻehā, pono e pani ʻia ke kaʻa no ka hoʻāʻo ʻana i ke kūpaʻa insulation thermal me ka wikiwiki, a ʻaʻole e emi kona waiwai ma mua o 0.5 megaohm.
• 3. Ma hope o ka pani ʻia ʻana o ka pauma, pono e hoʻomaka ʻia ma hope o ʻelima mau minuke e pale i ke kolamu wai i loko o ka paipu mai ka hoʻihoʻi hou ʻana a me ka hoʻonui ʻana i ka mīkini kaʻa a me ke ahi.
• 4. Ma hope o ka hoʻokomoʻiaʻana o ka paila i loko o ka hana maʻamau, i mea e hoʻolōʻihi ai i kona ola lawelawe, pono e nānā inā he mau maʻamau ka volta hoʻolako, ka hana o kēia manawa a me ka pale pale. Inā ʻike ʻia kēia mau kūlana, pono e pani koke i ka pauma no ka hoʻoponopono pilikia.
•  
• - Ma ke kūlana i helu ʻia, ʻoi aku ka nui o kēia manawa ma mua o 20%.
• - Ke hāʻule nei ke kiʻekiʻe o ka wai i ka ʻāpana komo wai, e hoʻoulu ai i ka wai.
• - He haʻalulu koʻikoʻi a walaʻau paha ka ʻōpala submersible.
• - ʻO ka haʻahaʻa haʻahaʻa ma mua o 340 volts.
• - Ua pau ka fuse.
• - Ua poino ka paipu wai.
• - ʻOi aku ka haʻahaʻa o ke kūpaʻa insulation thermal o ka moto ma mua o 0.5 megaohm.
•  
• 5.Unit disassembly:
• - Wehe i ka nakinaki uwea, wehe i ka mahele paipu, a wehe i ka pa uwea.
• - e hoʻokuʻu i ka pahu wai, e hoʻokomo i ka wai i loko o ke keʻena kaʻa.
• - wehe i ka kānana, wehe i ka wili paʻa ma ka hui ʻana e hoʻoponopono i ke kumu kaʻa.
• - e hoʻokuʻu i lalo i ka bolt e hoʻopili ana i ka ʻāpana komo wai me ka mīkini, a hoʻokaʻawale i ka pamu mai ke kaʻa (e hoʻolohe i ka cushion unit i ka wā e hoʻokaʻawale ai, e pale ai i ka piʻo ʻana o ke kumu paʻa)
• - ʻo ke kaʻina hoʻokaʻawale ʻana o ka paila: (e nānā i ka helu 1) ʻāpana komo wai, impeller, diversion shell, impeller...... nānā i ke kino valve, i ka wā e wehe ai i ka impeller, e hoʻohana i nā mea hana kūikawā e wehe i ka lima conical o ka paʻa. impeller mua, a pale aku i ke kulou a me ka hoeha ana i ka pahu pamu i ke kaʻina o ka wehe.
• - ke kaʻina o ka wehe ʻana o ke kaʻa ʻo ia: (e nānā i ka helu 1) kau i ke kaʻa ma luna o ke kahua, a wehe i nā nati, kumu, nā kī paʻa o ke poʻo, ka pā kī, ke kī, ka noho alakaʻi alakaʻi haʻahaʻa a me ka pahu poʻo pālua mai lalo o ke kaʻa, a laila lawe i ka rotor (e makaʻala i ʻole e hōʻino i ka pūʻolo uea) a hope e wehe i ka ʻāpana hoʻohui a me ka noho alakaʻi alakaʻi luna.
• - hui hui: ma mua o ka hui ʻana, pono e hoʻomaʻemaʻe ʻia ka ʻōpala a me ka lepo o nā ʻāpana, a uhi ʻia ka ʻili a me nā mea hoʻopaʻa me ka sealant, a laila hoʻohui ʻia ma ke ʻano ʻē aʻe o ka wehe ʻana (e neʻe ka pahu kaʻa i luna a i lalo ma hope o ka hui ʻana ma kahi o hoʻokahi. millimeter), ma hope o ka hui ʻana, pono e maʻalahi ka hui ʻana, a laila ka mīkini hoʻāʻo kānana. E lawe ʻia nā pauma i loko o ka luawai no ka wehe ʻana a me ka mālama ʻana e like me ka Paukū 5 ma hope o hoʻokahi makahiki o ka hana ʻana, a i ʻole ma lalo o hoʻokahi makahiki o ka hana ʻana akā ʻelua mau makahiki o ka luʻu ʻana, a e hoʻololi ʻia nā ʻāpana kahiko.

 Welcome to use our submersible pump products!Our products are exquisitely designed and convenient to use, widely used in family, agriculture, and industrial fields.In order to ensure the lasting and stable performance of your products, we suggest paying special attention to drainage in winter to prevent motor icing, and rolling and tying the cable tightly.When storing, please choose an environment without corrosive substances and harmful gases, and keep the temperature below 40 °C.If you do not use it for a long time, please pay attention to rust prevention to protect the quality of the submersible pump.Wish you a smooth and unimpeded use experience, thank you for choosing our products!

01 Hoʻokomo wai hohonu

02 Waiwai kiʻekiʻe

03 lako wai mauna 

04 hale kiaʻi wai

05 Ka wai mahiai

06 ka hoʻoulu ʻana i ka māla

07 hoʻokomo wai kahawai

08 wai hale