150QJR Va'alele Loloto Pamu

Designed for underground hot water mining below 100°C, this product has the characteristics of high temperature resistance, corrosion resistance and aging resistance. Whether in underground mining or other hot water environment applications, it can effectively resist the challenges of harsh environment. Its excellent performance and stable quality make it an ideal choice in the mining field.

1, tuʻuina atu eletise: tolu-vaega AC 380V (faʻapalepale + / - 5%), 50HZ (faʻapalepale + / - 1%).

2, lelei vai:

(1) water temperature is not higher than 20 °C;

(2) faʻamaʻi eleelea faʻamaʻi (fuainumera tele) e le sili atu i le 0.01%;

(3) PH tau (pH) 6.5-8.5;

(4) e le sili atu i le 1.5mg/L mea e maua i le hydrogen sulfide;

(5) e le sili atu i le 400mg/L le mea o iai ion chloride.

3, o le afi tapuni poʻo le faʻatumu vai susu fausaga, aʻo leʻi faʻaaogaina le vaʻa afi afi e tatau ona tumu i vai mama, e puipuia ai le tumu sese, ona faʻamalosi lea o le tui vai, faʻamau faʻamalolo ea, a le o lea e le faʻatagaina e faʻaaoga.

4, e tatau ona goto uma i totonu o le vai, o le loloto o le maulu e le sili atu nai lo le 70m, o le pito i lalo ole pamu mai le pito i lalo ole vaieli e le itiiti ifo i le 3m.

5, e tatau ona mafai e le vai lelei ona faʻafeiloaʻi le gaosiga o le pamu vai ma faʻaauau pea le faʻagaioiga, e tatau ona pulea le gaosiga o le suavai i le 0.7 - 1.2 taimi o le tafe fua.

6, e tatau ona saʻo le vaieli, e le mafai ona faʻaaogaina pe lafoai le pamu faʻafefe, naʻo le faʻaogaina i luga.

7, o le pamu submersible e tatau ona faʻafetaui ma le uaea e tusa ai ma manaʻoga, ma le masini puipuia le mamafa i fafo. 8, o le pamu e matua faʻasaina e aunoa ma se vai e leai se uta masini suʻega

 The well submersible pump is a kind of pump suitable for clean water. It is strictly prohibited to dig new wells and extract sediment and turbid water. The voltage grade of the pump is 380/50HZ, and other submersible motors with different voltage grades need to be customized. Underground cables must be waterproof and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have conventional comprehensive motor protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and no-load protection. In abnormal cases, the protection device should be tripped in time. During installation and use, it is necessary to ensure that the pump is reliably grounded. It is forbidden to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. In the place where the pump is used, an obvious "anti-electric shock" sign must be set up. Before going down the well or installing the motor, the internal chamber must be filled with distilled water or non-corrosive clean cold water. The water adding/discharge bolt must be tightened. When testing the pump on the ground, water must be poured into the pump chamber to lubricate the rubber bearings. The instant start should not exceed one second to check whether the direction is correct, the same as the steering indication. Pay attention to safety when the pump is upright to prevent overturning and injury. Strictly in accordance with the provisions of the pump lift and flow range of use, to prevent the pump in low lift has a large flow or in high lift has a large pull, resulting in extreme wear of thrust bearings and other components, resulting in motor overload burnout. After the pump into the well, the insulation resistance of the motor and the ground shall be measured, which shall not be less than 100MΩ. After the start, observe the voltage and current regularly, and check whether the motor winding insulation meets the requirements; if the temperature of the pump storage location is below the freezing point, the water in the motor cavity shall be discharged to prevent freezing damage to the motor.

Fa'atomuaga pu'upu'u o le fausaga: vaega pamu e masani lava ona aofia ai le pamu pamu, impeller, atigi fa'afefete, pa'u pa'u, siaki valve tino (vaega faitalia) ma isi vaega. O vaega ole afi e tele lava ina aofia ai le faavae, ata tifaga faʻatonutonuina, faʻapipiʻi faʻamalosi, ipu faʻapipiʻi, nofoa faʻataʻitaʻiga pito i lalo, stator, rotor, nofoa faʻataʻitaʻi pito i luga, mama oneone, vaega ole vai, uaea ma isi vaega.

O uiga autu o le oloa e aofia ai:

 1, O le afi o se afi faʻafefe susu e tolu-vaega asynchronous afi e tumu i le vai, o le afi afi e tumu i vai mama, faʻaaogaina e faʻamalo ai le afi ma faʻafefe le faʻamomoli, o le faʻatonuga faʻatonutonu ata i le pito i lalo o le afi e faʻaaogaina e fetuunai ai. o le faʻalauteleina ma le faʻaitiitia o le eseesega o le mamafa o le vai i totonu o le tino e mafua mai i le suiga o le vevela o le afi.

 2, Ina ia puipuia le oneone i totonu o le vaieli mai le ulufale atu i le afi, o le pito i luga o le afi afi ua faʻapipiʻiina i faʻamaufaʻailoga suauʻu lua, ma faʻapipiʻi se mama oneone e fausia ai se fausaga puipuia o le oneone.

 3, Ina ia puipuia le pamu pamu mai le alu i luga pe a amata, o le pamu pamu ma le afi afi e fesoʻotaʻi e se soʻotaga, ma faʻapipiʻi le pito i luga o le faʻamau i le pito i lalo o le afi.

 4, O le lubrication o le afi ma le pamu o le vai lubrication.

 5, O le afi stator winding e faia i le tulaga maualuga submersible afi viliina uaea, ma le faatinoga insulation maualuga.

 6, O le pamu ua mamanuina e le komepiuta CAD, faʻatasi ai ma le faʻaogaina faigofie ma le lelei o faʻatinoga faʻapitoa.

(1) Sauniuniga aʻo leʻi faʻapipiʻiina:
1. Siaki pe fetaui le pamu fa'asusu i le fa'aogaina ma le lautele o lo'o fa'ailoa mai ile tusi lesona.
2. Fa'aaogaina o se obiect mamafa ma le lautele e tutusa ma le maualuga pito i fafo o le pamu fa'asusu, fua pe mafai e le inneldiameter o le vaieli ona ofi le pamu fa'asusu, ma fua pe o le loloto o le vai e fetaui ma mana'oga fa'apipi'i.
3. Siaki pe mama le vaieli ma pe o le vaieli e pala. 'Aua ne'i fa'aogaina se pamu eletise e fa'ato'ilaloina e fufulu ai le palapala ma le oneone o le pa'u welor e 'alofia ai le vave fa'aleagaina o le pamu eletise fa'alalo.
4. Siaki pe talafeagai le tulaga o le faʻapipiʻi welhead faʻapipiʻi ma pe mafai ona tatalia le tulaga o le iunite atoa
5. Siaki pe ua mae'a ma fa'apipi'i lelei vaega o pamu fa'asusu e tusa ai ma le fa'ata'otoga o lo'o i totonu o le tusi lesona.
6. Tatala le fa'avili vai ma fa'atumu le oga o le afi i vai mama, e le pala (matau. ia mautinoa e fa'atutu i luga), ona fa'amau lea o le fa'asuavai. A maeʻa le 12 itula o le tui vai, e le tatau ona itiiti ifo i le 150M Q le teteʻe o le afi ile 500V pe a fua ile laulau lulu 500V.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

O le fa'apipi'i fa'apipi'i fa'asologa o fa'agasologa o uaea e fa'apea:

8. Fa'aaoga se multimeter e siaki ai pe o feso'ota'i laina e tolu-vaega ma pe fa'atatau i le paleni DC.
9. Siaki pe sili atu le mamafa o le eletise ma le transformer, ona faʻafesoʻotaʻi lea o le ki o le puipuiga o le mamafa poʻo le amataina o meafaigaluega. Va'ai le Laulau 2 mo fa'ata'ita'iga fa'apitoa, ona sasaa lea o se pakete vai i totonu o le pamu vai mai le pamu vai e fa'alu'u ai pa'u pa'u i totonu o le pamu, ona tu'u sa'o lea o le pamu eletise fa'ato'ilalo ma tumau. ma siaki pe o ogatasi le fa'atonuga ma le fa'ailoga fa'atonu. Afai e leai, fesuiai soʻo se lua fesoʻotaʻiga o le tolu-vaega uaea. Ona faʻapipiʻi lea o le faamama ma sauni e alu i lalo o le vaieli. Afai e faʻaaogaina i taimi faʻapitoa (e pei o alavai, alavai, vaitafe, vaituloto, vaituloto, ma isi), o le pamu eletise e tatau ona faʻalagolago i le eleele.

(2) Fa'apipi'i meafaigaluega ma meafaigaluega:
1. Tasi le pea o filifili si'i mo le sili atu i le lua tone.
2. O se tripod ma le maualuga tuusaʻo e le itiiti ifo i le fa mita.
3. E lua maea tautau (uaea uaea) e mafai ona tauave le mamafa e sili atu ma le tasi tone (e mafai ona tauave le mamafa o se seti atoa o pamu vai).
4. Fa'apipi'i ni paipa se lua (splints).
5. Tu'u, samala, sikuli, meafaigaluega eletise ma meafaigaluega, ma isi.

(3) Fa'apipi'i pamu eletise:
1. O le faʻapipiʻiina o le faʻapipiʻiina o le pamu eletise o loʻo faʻaalia i le Ata 2. O faʻamaufaʻailoga faʻapipiʻi faʻapitoa o loʻo faʻaalia i le Laulau 3 "Lisi o Fua Faʻapipiʻi o le Pump Eletise Submersible".

2. O pamu eletise e mafai ona faʻafefeteina ma le ulu e itiiti ifo i le 30 mita e mafai ona sisi saʻo i totonu o le vaieli e faʻaaoga ai faʻagaau ma maea uaea poʻo isi maea hemp e mafai ona tauaveina le mamafa atoa o le masini, paipa vai, ma vai i totonu o paipa.

3. O pamu ma le ulu e sili atu i le 30 mita e faʻaaogaina paipa uʻamea, ma o le faʻasologa faʻapipiʻi e faʻapea:
①Fa'aoga le pipii e pipii ai le pito pito i luga ole vaega o le pamu vai (o le afi ma le pamu vai o loʻo fesoʻotaʻi i le taimi lea), sii i luga i se filifili tautau, ma nonoa lemu i totonu o le vaieli seia tuʻu le faʻamau i luga o le ulu vaieli ma aveese le filifili tautau.
② Fa'aaoga se isi pea paipa e pipii ai se paipa, sii i luga i se filifili tautau e 15 cm le mamao mai le apa, ma tuutuu i lalo lemu. I le va o lau paipa ma le pamu pamu Fa'amau le pa'u ma fa'amau le paipa ma pamu fa'atasi i fa'amau, nati ma fufulu vaipuna.
③ Si'i teisi le pamu vai, aveese le pipii i le pito pito i luga o le pamu vai, nonoa le uaea i le paipa vai i se pa'u palasitika, ma nonoa malie i lalo seia tu'u le pipii i le ulu vaieli.
④ Fa'aaoga le auala lava e tasi e nonoa uma ai paipa vai i totonu o le vaieli.
⑤A maeʻa ona fesoʻotaʻi le uaea taʻitaʻia i le ki faʻatonutonu, e faʻafesoʻotaʻi i le sapalai eletise tolu-vaega.

(4) Mea e matauina i le taimi o le faʻapipiʻiina:
1. Afai e maua se fa'alavelave fa'afuase'i i le taimi o le pamu, liliu pe toso le paipa vai e fa'ato'ilalo ai le mea fa'amau. Afai e le aoga lava faiga eseese, faamolemole aua le faamalosia le pamu i lalo e aloese ai mai le faaleagaina o le pamu eletise ma le vaieli.
2. I le taimi o le faʻapipiʻiina, e tatau ona tuʻu se paʻu paʻu i le flange o paipa taʻitasi ma faʻapipiʻi tutusa.
3. A tuu i lalo le pamu vai i totonu o le vaieli, e tatau ona tuʻu i le ogatotonu o le paipa vaieli e puipuia ai le pamu mai le faʻasaga i le puipui o le vaieli mo se taimi umi, ma mafua ai ona tete le pamu ma salu ma mu le afi. .
4. Fuafua le loloto o le pamu vai i le pito i lalo o le vaieli e tusa ai ma tulaga o le tafe o le oneone ma le palapala o le vaieli. Aua le tanumia le pamu i le palapala. O le mamao mai le pamu vai i le pito i lalo o le vaieli e masani lava e le itiiti ifo i le 3 mita (silasila i le Ata 2).
5. O le loloto o le vai o le pamu vai e tatau ona le itiiti ifo i le 1-1.5 mita mai le maualuga o le vai i le node o le vai (silasila i le Ata 2). A leai, e mafai ona faigofie ona faʻaleagaina le paʻu vai.
6. O le si'itia o le pamu vai e le mafai ona maualalo tele. A leai, e tatau ona fa'apipi'i se alavai faitoto'a i luga o le paipa vai e fa'atonutonu ai le tafe o le pamu i le nofoaga fa'atatau e puipuia ai le afi mai le mamafa ma mu ona o le tele o tafega.
7. A oʻo ina tamoʻe le pamu vai, e tatau ona faʻaauau pea le gaosiga o le vai ma e oʻo lava, o le taimi nei e tatau ona mautu (i lalo o tulaga faigaluega faʻatulagaina, e masani lava e le sili atu i le 10% o le taimi nei faʻamauina), ma e le tatau ona i ai se vibration poʻo le pisa. Afai ei ai se faaletonu, e tatau ona taofi le masini e suʻe le mafuaʻaga ma faʻaumatia.
8. A faʻapipiʻi, faʻalogo lelei i le faʻatulagaina o le uaea faʻavae afi (silasila i le Ata 2). Afai o le paipa vai o se paipa u'amea, ta'ita'i mai le fa'amau o le vaieli; pe a avea le paipa vai o se paipa palasitika, taʻitaʻia mai le faʻailoga o le pamu eletise.

• 1. A maeʻa ona faʻapipiʻi le pamu submersible, siaki le faʻaogaina o le insulation ma le tolu-vaega faʻatautaia mai le ki, siaki pe sese le meafaigaluega ma le fesoʻotaʻiga o mea amata, pe a leai se faʻafitauli, e mafai ona amata le masini faʻataʻitaʻiga, ma mataʻituina pe sili atu le fua faʻatatau o le meafaifaʻaili i le voltage faʻamaonia ma le taimi nei o loʻo faʻamaonia i luga o le nameplate pe a maeʻa le amataga, ma mataʻituina pe o le pamu o loʻo i ai le pisapisao ma le vibration, ma faʻaogaina pe a masani mea uma.
• 2. A maeʻa le faʻaogaina muamua o le pamu mo le fa itula, e tatau ona tapuni le afi e faʻataʻitaʻi vave le faʻaogaina o le vevela, ma o lona tau e le tatau ona itiiti ifo i le 0.5 megaohm.
• 3. A maeʻa ona tapunia le pamu, e tatau ona amata pe a uma le lima minute e puipuia ai le koluma vai i totonu o le paipa mai le toe faʻaleleia atoatoa ma mafua ai le tele o le afi afi ma le susunuina.
• 4. A maeʻa ona tuʻuina le pamu i le gaioiga masani, ina ia faʻaumiina lona ola tautua, e tatau ona siaki pe o le voltage tuʻuina atu, galue i le taimi nei ma le faʻaogaina o le insulation e masani lava. Afai e maua tulaga nei, e tatau ona tapuni vave le pamu e foia faafitauli.
•  
• - I le tulaga faʻatulagaina, o le taimi nei e sili atu i le 20%.
• - O le maualuga o le vai e pa'ū i le vaega o le vai, ma mafua ai le vai vavao.
• - O le pamu fa'afefeteina e tele le vibration po'o le pisa.
• - E la'ititi ifo ile 340 volts le eletise.
• - Ua mu se fuse.
• - Ua leaga le paipa vai.
• - O le fa'alumaina fa'amama a le afi e maualalo ifo nai lo le 0.5 megaohm.
•  
• 5. Unit disassembly:
• - Tatala le nonoa uaea, aveese le vaega o paipa, ma aveese le ipu uaea.
• - vili i lalo le fa'amau vai, tu'u le vai i totonu o le potu afi.
• - aveese le faamama, tatala le sikulima mau i luga o le sooga e faʻaleleia ai le afi afi.
• - vili i lalo le fa'amau e feso'ota'i ai le vaega o le vai ma le afi, ma vavae'ese le pamu mai le afi (fa'alogo lelei i le fa'alava o le iunite pe a vavae'ese, e taofia ai le punou o le pamu)
• - o le fa'asologa o le fa'amavaeina o le pamu o le: (silasila i le ata 1) vaega o le vai, impeller, diversion shell, impeller...... siaki valve tino, pe a aveese le impeller, fa'aaoga meafaigaluega fa'apitoa e tatala ai le lima conical o le fa'amaumau. impeller muamua, ma aloese mai le punou ma le tu'imomomoina o le pamu i le faagasologa o le disassembly.
• - o le fa'agasologa o le talepeina o le afi o le: (silasila i le ata 1) tu'u le afi i luga o le fa'avae, ma aveese nati, fa'avae, fa'ato'aga ulu o lo'o lokaina, ipu fa'amau, ki, nofoa ta'iala pito i lalo ma fa'amau ulu fa'alua mai le pito i lalo. le afi i le faasologa, ona ave lea i fafo le rotor (faʻalogo e aua neʻi faʻaleagaina le afifi uaea) ma mulimuli ane aveese le vaega faʻafesoʻotaʻi ma le nofoa pito i luga o le taʻiala.
• - faʻapipiʻi iunite: aʻo leʻi faʻapipiʻiina, e tatau ona faʻamama le ele ma le palapala o vaega, ma faʻapipiʻi le pito i luga ma faʻamau faʻapipiʻi i le faʻamau, ona faʻapipiʻi lea i le faʻafeagai o le faʻamavaeina (e alu i luga ma lalo le afi afi pe a uma le faʻapotopotoga mo le tasi. milimita), pe a uma le faʻapotopotoga, e tatau ona fetuutuunaʻi le soʻotaga, ona faʻapipiʻi lea o le masini suʻega suʻega. E tatau ona ave i fafo pamu i totonu o le vaieli mo le talepe ma le tausiga e tusa ai ma le Mataupu 5 pe a uma le tausaga o galue, pe itiiti ifo i le tausaga o galue ae lua tausaga o le taimi o le maulu, ma e tatau ona suia vaega ua masaesae.

 Welcome to use our submersible pump products!Our products are exquisitely designed and convenient to use, widely used in family, agriculture, and industrial fields.In order to ensure the lasting and stable performance of your products, we suggest paying special attention to drainage in winter to prevent motor icing, and rolling and tying the cable tightly.When storing, please choose an environment without corrosive substances and harmful gases, and keep the temperature below 40 °C.If you do not use it for a long time, please pay attention to rust prevention to protect the quality of the submersible pump.Wish you a smooth and unimpeded use experience, thank you for choosing our products!

01 Vaivai loloto

02 Suavai maualuga

03 vai mai mauga 

04 vai olo

05 Fa'asusu fa'ato'aga

06 fa'asusuina o togalaau

07 vai inu vai

08 vai aiga