Water Filled Submersible Pump

ʻO ka ʻōnaehana uila submersible ʻo QS kahi ʻano hou o ka irrigation a me ka mīkini wai. ʻO kēia pūʻulu o nā pumps he vertical, me ka hoʻohana ʻana i ka hoʻolālā vane alakaʻi radial maikaʻi a maikaʻi ʻole, ka leo liʻiliʻi, ke kaumaha māmā, ke kiʻekiʻe kiʻekiʻe, ka hoʻonohonoho maʻalahi a me ka neʻe ʻana, mālama maʻalahi a me ka hana.

 Kahe ana 5-50m3/h, hāpai 5-800m.

Hoʻolako ʻia ka huahana me ʻekolu-phase AC 380V (ʻo ka hoʻomanawanui ʻo ± 5%), 50 Hz (ʻo ± 1%) ka lako mana. ʻO nā pono kūpono o ka wai:

(1) ʻaʻole e piʻi aʻe ka mahana o ka wai ma mua o 20 °C;

(2) ʻaʻole ʻoi aku ka nui o nā mea haumia paʻa (mass ratio) ma mua o 0.01%;

(3) ʻO ka waiwai PH (pH) he 6.5-8.5;

(4) ʻAʻole ʻoi aku ka nui o ka hydrogen sulfide ma mua o 1.5 mg / L;

(5) ʻAʻole ʻoi aku ka nui o ka chloride ion ma mua o 400 mg / L. ʻO ke kaʻa he mea pani a i hoʻopiha ʻia i ka wai.

Ma mua o ka hoʻohana ʻana, pono e hoʻopiha ʻia ka lua o loko o ke kaʻa submersible i ka wai maʻemaʻe, a e hoʻopaʻa ʻia ka wai hoʻoheheʻe a me nā ʻūhā o ka ea, inā ʻaʻole ia e hoʻohana ʻia. Pono e hoʻokomo piha ʻia ka pauma submersible i loko o ka wai e hana ai, ʻaʻole e ʻoi aku ka hohonu o ka hoʻokomo ʻana ma mua o 70 mika, a ʻo ka mamao ma waena o ka lalo o ka paila a me ka lalo o ka luawai ʻaʻole e emi iho ma mua o 3 mika. E hoʻokō ka kahe wai o ka wai i ka wai a me ka hoʻomau ʻana i nā koi hana o ka paila submersible, a e hoʻokele ʻia ka hoʻopuka ʻana o ka wai o ka paila submersible ma 0.7-1.2 mau manawa o ka kahe i helu ʻia. Pono e kū pololei ka pūnāwai, a ʻaʻole hiki ke hoʻohana ʻia ka paila submersible ma ke ʻano ākea a i ʻole ke kuhi ʻia, akā ma ke kū pololei. Pono e hoʻohālikelike ʻia ka pauma submersible me nā kaula a hoʻolako ʻia me nā mea pale o waho e like me ka makemake. Ua pāpā loa ʻia ka pauma submersible mai ka hoʻāʻo ʻana me ka hoʻouka ʻole ʻana i ka wai.

1, ʻo ka pauma hoʻoheheʻe ʻia no ka pauma wai maʻemaʻe, pāpā i ka holoi ʻana i ka luawai hou, ka paila ʻana i ka sediment a me ka wai lepo,

2, maikaʻi ka wai puna wai uila helu 380/50HZ, ka hoʻohana ʻana i nā māka uila ʻē aʻe o nā motika submersible pono e hana maʻamau. Pono e hoʻohana i nā kaula ʻo Downhole i ke kaula wai, pono e hoʻolako ʻia me nā lako hoʻomaka, e like me ka pahu hoʻolaha, hoʻomaka ʻaʻole mākaukau pono e loaʻa i ka hana hoʻomalu holoʻokoʻa holoʻokoʻa, e like me ka pale pōkole overload, pale ʻāpana, pale undervoltage, pale grounding, pale idling, i loko. ʻO ka hihia o nā kūlana kūpono ʻole, ʻo ka mea pale e pono ke hele i ka manawa hana.

3, pono e hoʻokumu pono ʻia ka paila i ke kaʻina o ka hoʻonohonoho ʻana a me ka hoʻohana ʻana. Ua pāpā ʻia ma nā lima a me nā wāwae pulu pulu huki huki. Ma mua o ka hoʻokomo ʻana a me ka mālama ʻana i ka pamu, pono e ʻoki ʻia ka mana. Hoʻokomo ʻia ma kahi e hoʻohana ʻia ai ka paila, pono e hōʻailona maopopo ʻia "e pale i ka haʻalulu uila". Ma mua o ka iho ʻana i ka pūnāwai a i ʻole ka hoʻokomo ʻana, pono e hoʻopiha ʻia ka lua kaʻa me ka wai i hoʻoheheʻe ʻia a i ʻole ka wai anuanu maʻemaʻe ʻole, a hoʻopaʻa i ka pahu wai.

4, i ka wā o ka hana ninaninau kūloko o ka paila, pono e ninini ʻia ka wai i loko o ke keʻena pamu e hoʻomaʻamaʻa i ka ʻōpala. ʻAʻole e ʻoi aku ka manawa hoʻomaka koke i hoʻokahi kekona, e nānā inā like ke kuhikuhi me ke kuhikuhi hoʻokele. Ke kū pololei ka paila, e hoʻolohe i ka palekana, pale i ka hoʻohuli a me ka ʻeha.

5, e like me nā ʻōlelo o ka hoʻokiʻekiʻe ʻana o ka pauma, ke kahe o ka hoʻohana ʻana, e pale aku i ka kahe haʻahaʻa a i ʻole ka hoʻokiʻekiʻe kiʻekiʻe o ka pumping ikaika, ke kuʻi ʻana a me nā ʻāpana ʻē aʻe o ka ʻaʻahu, puhi ʻia ke kaʻa kaʻa 6, ma hope o ka pau ʻana o ka punawai, ʻAʻole pono ke ana o ke kaʻa i ka pale ʻana o ka honua ma lalo o 100M, ma hope o ka hoʻomaka ʻana e nānā i ka volta a me kēia manawa, e nānā i ka insulation winding motor, inā e like me nā koi; E hoʻomaloʻo i ka wai kaʻa kaʻa kaʻa, e pale i ka pōʻino o ka wai o ka mīkini ma muli o ka wela haʻahaʻa.

The pump part is mainly composed of pump shaft, impeller, guide housing, rubber bearing, check valve body (optional) and other components. The motor part mainly includes base, pressure regulating diaphragm, thrust bearing, thrust plate, lower guide bearing seat, stator, rotor, upper guide bearing seat, sand discharging ring, water inlet section, lead cable and other components. The main characteristics of this product are that the motor is a water-immersed three-phase asynchronous motor, and the motor cavity is filled with water to cool the motor and lubricate the bearing. The pressure regulating film at the bottom is used to adjust the pressure difference of the water body in the cavity caused by the temperature rise of the motor. In order to prevent the sand from entering the motor, the upper end of the motor shaft extension is equipped with two oil seals and installed a sand discharging ring, forming a sand prevention structure. At the same time, in order to prevent the pump shaft from jumping when starting, the pump shaft is connected with the motor shaft by a coupling, and the thrust bearing is installed under the motor. The lubrication of the whole product is water lubrication, and the motor stator winding is made of high quality submersible motor winding wire with high insulation performance. In addition, the pump is designed by computer CAD, with simple structure and excellent technical performance.

(1) Hoʻomākaukau ma mua o ke kau ʻana:
1. E nānā inā kūpono ka pauma submersible i nā kūlana hoʻohana a me ka laulā i ʻōlelo ʻia ma ka manual.
2. Ma ka hoʻohana ʻana i kahi obiect kaumaha me ke anawaena e like me ke anawaena o waho loa o ka pauma hoʻohaʻahaʻa, e ana inā hiki i ka inneldiameter o ka luawai ke hoʻokomo i ka pauma hoʻoheheʻe ʻia, a e ana i ka hoʻokō ʻana o ka hohonu i nā koi hoʻokomo.
3. E nānā i ka maʻemaʻe o ka luawai a me ka wai o ka pūnāwai. Mai hoʻohana i ka pauma uila e holoi ai i ka ʻōpala welor a me ka wai one no ka pale ʻana i ka pōʻino mua o ka pauma uila.
4. E nānā inā kūpono ke kūlana o ka hoʻopili welhead a inā hiki iā ia ke kū i ke kūlana o ka ʻāpana holoʻokoʻa.
5. E nānā inā ua paʻa a hoʻokomo pono ʻia nā ʻāpana pauma submersible e like me ke kiʻikuhi hui ma ka manual.
6. Wehe i ka wili wai a hoʻopiha i ka lua kaʻa me ka wai maʻemaʻe, ʻaʻole ʻino (e hoʻomaopopo. Ma hope o 12 mau hola o ka wai ʻana, ʻaʻole pono e emi ka pale insulation o ke kaʻa ma mua o 150M Q ke ana ʻia me kahi papa haʻalulu 500V.
7. Uea hui, e oki i ka lima wili 120mm mai kekahi welau o ke kaula i puka aku a me ka uwea like me ka pahi a ka mea uwila, a oki i ka loa o na uwea kumu ekolu ma ke ano hee, e ihi i ke kumu keleawe 20mm, e wili i ka oxide. papa ma ka waho o ka uwea keleawe me ka pahi a me ke one lole, a hookomo i na uwea pili elua i loko o palirs.Ma hope o nakinaki pono i ka papa me ka maikai keleawe uea, solder pono a paa, a me ke one o kekahi. burrs ma ka ʻili. A laila, no nā hui ʻekolu, e hoʻohana i ka lipine insulation polyvester e hoʻopili iā lākou ma ke ʻano semi hoʻopaʻa ʻia no ʻekolu ʻauʻau. E wīwī i nā ʻaoʻao ʻelua o ka papa wrapping a paʻa me ke kaula nyion, a laila e hoʻohana i ke ʻano semi-stacked e ʻōwili i ka lipine no ʻekolu papa. E uhi i ka outellayer me ke kiʻekiʻe-press insulation tape no ʻekolu papa. ʻO ka hope, e pelu i nā kaula ʻekolu a hoʻopaʻa pinepine iā lākou no nā papa ʻelima me ka lipine kaomi kiʻekiʻe. Pono e hoʻopaʻa paʻa ʻia kēlā me kēia papa, a pono e paʻa a paʻa nā hui interlayer e pale aku i ka wai mai ke komo ʻana a me ka hōʻino ʻana i ka insulation, Ma hope o ke kāwili ʻana, e hoʻoinu i ka wai i ka lumi wela o 20 'c no 12 mau hola, a e ana i ke kūpaʻa insulation me kahi papa haʻalulu. , ʻaʻole pono e emi ma lalo o 100M Ω

ʻO ke kiʻikuhi kaʻina hana uwila i hoʻopili ʻia penei:

8. E hoʻohana i ka multimeter no ka nānā ʻana inā pili ʻia nā uea ʻekolu ʻāpana a inā ʻaʻole kaulike ke kūpaʻa DC.
9. E nānā inā ua hoʻonui ʻia ka mana kaapuni a me ka mea hoʻololi, a laila hoʻohui i ke kī hoʻomalu overload a i ʻole nā ​​mea hoʻomaka. E nānā i ka Papa 2 no nā hi'ohi'ona kiko'ī, a laila, e ninini i ka bākeke wai i loko o ka pā wai mai ka puka wai e ho'oma'ama'a i ka pahu pahu i loko o ka pama, a laila e kau i ka pauma uwila i lalo i luna a pa'a. a e nānā inā pili ka hoʻokele me ka hōʻailona hoʻokele. Inā ʻaʻole, e hoʻololi i nā mea hoʻohui ʻelua o ke kaula ʻekolu. Inā hoʻohana ʻia i nā hanana kūikawā (e like me nā ʻauwai, nā ʻauwai, nā muliwai, nā loko, nā loko, a me nā mea ʻē aʻe), pono e hoʻopaʻa ʻia ka paila uila.

(2) Mea hoʻokomo a me nā mea hana:
1. Hoʻokahi mau kaulahao hāpai no ʻelua mau tona.
2. ʻO kahi tripod me ke kiʻekiʻe kū i lalo o ʻehā mau mika.
3. ʻElua kaula kau (wire ropes) hiki ke kaumaha i ke kaumaha ma mua o hoʻokahi tona (hiki ke halihali i ke kaumaha o ka pahu wai piha).
4. E hoʻouka i ʻelua mau paʻi (splints).
5. Nā wrenches, hammers, screwdrivers, uila a me nā mea kani, etc.

(3) Hoʻokomo ʻia ka pauma uila:
1. Hōʻike ʻia ke kiʻikuhi hoʻonohonoho o ka pauma uila submersible ma ka Figure 2. Hōʻike ʻia nā ana hoʻonohonoho kikoʻī ma ka Papa 3 "List of Installation Dimensions of the Submersible Electric Pump".

2. Hiki ke hoʻokiʻekiʻe pololei ʻia nā paila uila me ke poʻo ma lalo o 30 mika i loko o ka pūnāwai me ka hoʻohana ʻana i nā paipu a me nā kaula uwea a i ʻole nā ​​kaula hemp ʻē aʻe e hiki ai ke halihali i ke kaumaha piha o ka mīkini holoʻokoʻa, nā paipu wai, a me ka wai i loko o nā paipu.

3. ʻO nā pumps me ke poʻo i ʻoi aku ma mua o 30 mika e hoʻohana i nā paipu kila, a penei ka hoʻonohonoho ʻana:
①E hoʻohana i kahi pipili no ka hoʻopaʻa ʻana i ka ʻaoʻao o luna o ka ʻaoʻao o ka pauma wai (ua hoʻopili ʻia ke kaʻa a me ka pauma wai i kēia manawa), e hoʻokiʻekiʻe me ke kaulahao e kau ana, a nakinaki mālie i loko o ka luawai a kau i ka paʻi ma ke poʻo punawai a wehe i ke kaulahao. kaulahao e kau ana.
② E hoʻohana i nā paipu ʻē aʻe e hoʻopaʻa i ka paipu, e hoʻokiʻekiʻe me ke kaulahao e kau ana ma kahi mamao o 15 knm mai ka lehelehe, a e hoʻohaʻahaʻa mālie. Ma waena o ka flange paipu a me ka flange pump E hoʻopaʻa i ka pā hao a hoʻopaʻa i ka paipu a paʻa pono me nā bolts, nati a me nā mea holoi puna.
③ E hoʻokiʻekiʻe iki i ka pauma hoʻohaʻahaʻa, e wehe i ke kaula ma ka ʻaoʻao o luna o ka pā wai, e hoʻopaʻa paʻa i ke kaula i ka paipu wai me ka lipine plastik, a nakinaki mālie i lalo a kau ʻia ka paʻi ma ka luawai.
④E hoʻohana i ke ʻano like e hoʻopaʻa ai i nā paipu wai a pau i loko o ka pūnāwai.
⑤Ma hope o ka hoʻopili ʻia ʻana o ke kaula alakaʻi i waho i ka hoʻololi mana, ua hoʻopili ʻia i ka lako mana ʻekolu.

(4) Nā mea e nānā ai i ka wā e hoʻokomo ai:
1. Inā ʻike ʻia kahi mea hoʻopuʻi i ka wā o ka pahū ʻana, e hoʻohuli a huki paha i ka paipu wai no ka lanakila ʻana i ke kiko pahu. Inā ʻaʻole e holo nā ʻano hana like ʻole, e ʻoluʻolu, mai hoʻoikaika i ka pamu i lalo e pale aku i ka pōʻino o ka pauma uila a me ka luawai.
2. I ka wā o ka hoʻokomo ʻana, pono e kau ʻia kahi pā hao ma ka ʻaoʻao o kēlā me kēia paipu a paʻa pono.
3. Ke hoʻohaʻahaʻa ʻia ka paila wai i loko o ka pūnāwai, pono e hoʻokomo ʻia i waenakonu o ka paipu pūnāwai i mea e pale ai i ka holo ʻana o ka pamu i ka paia o ka pūnāwai no ka manawa lōʻihi, e hoʻonāwaliwali ai ka pamu a e kahili a wela ke kaʻa. .
4. E hoʻoholo i ka hohonu o ka paila wai a hiki i lalo o ka luawai e like me ke kahe ʻana o ke one a me ka lepo o ka luawai. Mai kanu i ka pamu i ka lepo. ʻO ka mamao mai ka pā wai a hiki i lalo o ka pūnāwai ʻaʻole i emi iho ma mua o 3 mika (e nānā i ke Kiʻi 2).
5. ʻAʻole emi ka hohonu o ke komo ʻana o ka wai ma lalo o 1-1.5 mika mai ke kiʻekiʻe o ka wai ikaika a hiki i ka node inlet wai (e nānā i ke Kiʻi 2). Inā ʻaʻole, hiki ke pohō maʻalahi nā bearings pump wai.
6. ʻAʻole hiki ke haʻahaʻa loa ka hāpai ʻana o ka paila wai. A i ʻole, pono e hoʻokomo ʻia kahi valve puka ma luna o ka pipeline wai punawai e hoʻomalu i ke kahe ʻana o ka paila ma ka helu kahe i helu ʻia e pale ai i ka hoʻonui ʻia ʻana o ke kaʻa a puhi ʻia ma muli o nā kahe kahe nui.
7. I ka holo ana o ka pauma wai, pono e hoomau ka puka ana o ka wai a me ke ano, pono ke kupaa (ma lalo o na kulana hana i heluia, ma ke ano, aole oi aku mamua o 10% o ka manawa i heluia), a aole e haalulu a walawala. Inā loaʻa kekahi mea ʻino, pono ke kāpae ʻia ka mīkini e ʻike i ke kumu a hoʻopau.
8. I ka wā e hoʻokomo ai, e hoʻolohe i ka hoʻonohonoho ʻana o ka uea hoʻopaʻa ʻia kaʻa (e nānā i ke Kiʻi 2). Inā he paipu kila ka paipu wai, e alakaʻi iā ia mai ka puʻu punawai; inā he paipu plastik ka paipu wai, e alakaʻi iā ia mai ka hōʻailona kumu o ka paila uila.

The use of underwater pumps need to be carried out in strict accordance with the following steps: First of all, after the installation of the underwater pump, it is necessary to recheck the insulation resistance and the three-phase continuity of the switch, and check whether there are errors in the connection of the instrument and the start equipment. If there is no problem, you can start to test the machine. After the start, observe whether the indication readings of each instrument are correct. If the rated voltage and current specified on the nameplate are exceeded, please observe whether the pump has any noise or vibration. If everything is normal, it can be put into operation. The second step, after the pump runs for four hours for the first time, it should be closed and the thermal insulation resistance of the motor should be tested quickly. Its value should not be less than 0.5 megaohm. The third step, after the pump stops, it should be restarted after five minutes to prevent the water column in the pipeline from completely reversing, resulting in the motor burning due to excessive current. The fourth step, after the pump is put into normal operation, in order to prolong its service life, it is necessary to check the power supply voltage, operating current and insulation resistance regularly to see if they are normal. If the following conditions are found, the machine should be shut down immediately to troubleshoot:

1 the current exceeds 20% under the rated working conditions.

2 the dynamic water level drops to the inlet section, causing intermittent drainage.

3 the underwater pump vibrates violently or makes a lot of noise.

4 the supply voltage is lower than 340 volts.

5 a fuse burned. 6 water pipe damage.

7 the motor to the ground thermal insulation resistance is less than 0.5 megaohms.

The fifth step, the removal of the unit:

1 untie the cable tether, remove the pipe part, and remove the line protection plate.

2 screw down the water bolt and discharge all the water in the motor chamber.

3 remove the filter and loosen the fixing screw on the coupling fixed motor shaft.

4 screw down the bolt connecting the water inlet section and the motor, separate the pump and the motor (pay attention to make the unit level to prevent the bending of the pump shaft when separating)

5 the removal sequence of the pump is: (see Figure 1) water inlet section, impeller, shunt shell, impeller, check valve body. When removing the impeller, use special tools to loosen the cone sleeve fixed the impeller. In the process of removal, avoid bending the pump shaft and damage the various parts.

6 the removal process of the motor is: (see Figure 1) put the motor on the platform, and in order from the bottom of the motor bolt nuts, base, shaft head lock nut, thrust plate, key and lower guide bearing seat (iron rod bolt) on the connecting parts, and then take out the stator (careful not to damage the wire packet), and finally remove the connecting part and the upper guide bearing seat. Unit assembly: before assembly, rust and dirt on each component should be cleaned and sealant should be applied to each mating surface and fastener, and then the assembly should be carried out in reverse order of disassembly (the motor shaft moves about 1 mm after assembly), the coupling should be flexible after assembly, and then the filter should be put on for testing. Step six, after each use of the underwater electric pump operation for one year, or less than one year but immersed for two years, the disassembly and inspection should be carried out in accordance with the provisions of Article 5 to replace the worn parts.

 1, e hoʻoheheʻe i ka wai i loko o ka lua kaʻa (ʻoi loa i ka hoʻoilo e pale ai i ka hau mai ka hau), a nakinaki maikaʻi i ke kaula.

 2, e mālama i loko o kahi lumi i loko me ka ʻole o nā mea corrosive a me nā kinoea, me ka mahana ma lalo o 40 °C.

 3, pono ka hoʻohana lōʻihi e hoʻolohe i ka pale ʻana i ka ʻōpala o nā paila submersible.

01 Hoʻokomo wai hohonu

02 Waiwai kiʻekiʻe

03 lako wai mauna

04 hale kiaʻi wai

05 Ka wai mahiai

06 ka hoʻoulu ʻana i ka māla

07 hoʻokomo wai kahawai

08 wai hale