200QJB Paa Ruku Pai Hohonu

Whakahaerehia te tukatuka OEM! E ai ki nga whakaritenga a te kaiwhakamahi, te hoahoa me te hanga i nga momo momo whakaritenga motuhake o te motuka ruuma kore-paerewa me te papu. Ko nga paerewa whakatinanatanga hua: GB / T2816-2014 "paa pai ruku", GB / T2818-2014 "motika tukutahi pai". WhatsApp: 17855846335

WHAKAPAKI NEI PDF DOWNLOAD

Nga korero

Tohu

Tirohanga Hua

This product adopts variable frequency winding design, ensuring the motor stable long-term conversion operation between 1HZ-50HZ. Its characteristics of energy saving and prolonged service life make it an ideal choice. Through this design, users can achieve efficient energy utilization while prolonging the service life of the product, which meets the modern society's demand for environmental protection and sustainable development. Whether for industrial production or home use, this product will bring users more convenient and efficient experience, becoming the leading choice in the industry.

Nga Tikanga Whakamahi

This three-phase AC 380V (tolerance ± 5%), 50HZ (tolerance ± 1%) submersible pump is a reliable pump equipment, can be used in a variety of application scenarios. In terms of the use of conditions, to ensure good water quality, including water temperature is not higher than 20 °C, solid impurities content is not more than 0.01%, pH value is 6.5-8.5, hydrogen sulfide content is not more than 1.5mg / L, chloride ion content is not more than 400mg / L. The motor adopts a closed or water-filled wet structure, the inner cavity must be filled with clean water before use to prevent false filling. The pump must be completely immersed in water, and the immersion depth shall not exceed 70m, the distance from the bottom of the pump and the bottom of the well shall not be less than 3m. The water source shall meet the requirements of the pump inflow and continuous operation, the pump water control in the rated flow of 0.7-1.2 times. The well must be vertical, the pump can not be used horizontally or tilted, only vertical use. The pump must be equipped with cables and external overload protection device as required. It is strictly prohibited to dry turn the pump test. The design of the equipment is safe and reliable, meets the use of standards, is an indispensable ideal choice in all kinds of engineering projects and industrial applications.

Tauira Tikanga

Tohutoro Wahi Tauira

Tauira	Rere (m3/h)	Upoko (m)	Rotatingspeed(change/point)	Puma wai(%)	Putanga diameter (mm)	E tika ana diameter(mm)	Whakatauria power(KW）	Whakatauria ngaohiko(V)	Whakatauria nāianei(A)	Te Motika (%)	tauwehe hikoφ	Waeine Rahi Morahi Radial(mm)	Korero
200QJ20-40	20	40	2850	66	50	200runga	4	380	10.1	76.0	0.79	184
200QJ20-54		54					5.5		13.6	77.0	0.8
200QJ20-81		81					7.5		18.0	78.0	0.81
200QJ20-93		93					9.2		21.7	78.5	0.82
200QJ20-108		108					11		25.8	79.0	0.82
200QJ20-121		121					13		29.8	80.0	0.83
200QJ20-148		148					15		33.9	81.0	0.83
200QJ20-175		175					18.5		41.6	81.5	0.83
200QJ20-202		202					22		48.2	82.5	0.84
200QJ20-243		243					25		54.5	83.0	0.84
200QJ20-270		270					30		65.4	83.0	0.84
200QJ20-360		360					37		79.7	84.0	0.84
200QJ20-442		442					45		96.9	84.0	0.84
200QJ25-28	25	28	2850	68	65	200runga	4	380	10.1	76.0	0.79	184
200QJ25-42		42					5.5		13.6	77.0	0.8
200QJ25-56		56					7.5		18.0	78.0	0.81
200QJ25-70		70					9.2		21.7	78.5	0.82
200QJ25-98		98					11		25.8	79.0	0.82
200QJ25-112	25	112	2850	68	65	200runga	13	380	29.8	80.0	0.83	184
200QJ25-126		126					15		33.9	81.0	0.83
200QJ25-154		154					18.5		41.6	81.5	0.83
200QJ25-182		182					22		48.2	82.5	0.84
200QJ25-210		210					25		54.5	83.0	0.84
200QJ25-252		252					30		65.4	83.0	0.84
200QJ25-308		308					37		79.7	84.0	0.84
200QJ25-378		378					45		96.9	84.0	0.84
200QJ32-26	32	26	2850	70	80	200runga	4	380	10.1	76.0	0.79	184
200QJ32-39		39					5.5		13.6	77.0	0.8
200QJ32-52		52					7.5		18.0	78.0	0.81
200QJ32-65		65					9.2		21.7	78.5	0.82
200QJ32-78		78					11		25.8	79.0	0.82
200QJ32-91		91					13		29.8	80.0	0.83
200QJ32-104		104					15		33.9	81.0	0.83
200QJ32-130		130					18.5		41.6	81.5	0.83
200QJ32-143		143					22		48.2	82.5	0.84
200QJ32-169		169					25		54.5	83.0	0.84
200QJ32-195		195					30		65.4	83.0	0.84
200QJ32-247		247					37		79.7	84.0	0.84
200QJ32-299		299					45		96.9	84.0	0.84
200QJ40-26	40	26	2850	72	80	200runga	5.5	380	13.6	77.0	0.8	184
200QJ40-39		39					7.5		18.0	78.0	0.81
200QJ40-52		52					9.2		21.7	78.5	0.82
200QJ40-65		65					11		25.8	79.0	0.82
200QJ40-78		78					15		33.9	81.0	0.83
200QJ40-104		104					18.5		41.6	81.5	0.83
200QJ40-117		117					22		48.2	82.5	0.84
200QJ40-143		143					25		54.5	83.0	0.84
200QJ40-169		169					30		65.4	83.0	0.84
200QJ40-208		208					37		79.7	84.0	0.84
200QJ40-247		247					45		96.9	84.0	0.84
200QJ50-26	50	26	2850	74	80	200runga	5.5	380	13.6	77.0	0.8	184
200QJ50-39		39					9.2		21.7	78.5	0.82
200QJ50-52		52					11		25.8	79.0	0.82
200QJ50-65		65					15		33.9	81.0	0.83
200QJ50-78		78					18.5		41.6	81.5	0.83
200QJ50-91		91					22		48.2	82.5	0.84
200QJ50-104		104					25		54.5	83.0	0.84
200QJ50-130		130					30		65.4	83.0	0.84
200QJ50-156		156					37		79.7	84.0	0.84
200QJ50-208		208					45		96.9	84.0	0.84
200QJ63-24	63	24	2850	74	80	200runga	7.5	380	18.0	78.0	0.81	184
200QJ63-36		36					11		25.8	79.0	0.82
200QJ63-60		60					18.5		41.6	81.5	0.83
200QJ63-72		72					22		48.2	82.5	0.84
200QJ63-84		84					25		54.5	83.0	0.84
200QJ63-96		96					30		65.4	83.0	0.84
200QJ63-120		120					37		79.7	84.0	0.84
200QJ63-144		144					45		96.9	84.0	0.84
200QJ80-22	80	22	2850	75	100	200runga	7.5	380	18.0	78.0	0.81	184
200QJ80-33		33					11		25.8	79.0	0.82
200QJ80-44		44					15		33.9	81.0	0.83
200QJ80-55		55					18.5		41.6	81.5	0.83
200QJ80-66		66					22		48.2	82.5	0.84
200QJ80-88		88					30		65.4	83.0	0.84
200QJ80-99		99					37		79.7	84.0	0.84
200QJ80-121		121					45		96.9	84.0	0.84
200QJ100-18	100	18	2850	75	100	200runga	9.2	380	21.7	78.5	0.82	184
200QJ100-27		27					13		29.8	80.0	0.83
200QJ100-36		36					18.5		41.6	81.5	0.83
200QJ100-45		45					22		48.2	82.5	0.84
200QJ100-54		54					25		54.5	83.0	0.84
200QJ100-63		63					30		65.4	83.0	0.84
200QJ100-72	100	72	2850	75	100	200runga	37	380	79.7	84.0	0.84	184
200QJ100-90		90					45		96.9	84.0	0.84

Whakatupato Haumaru

This well submersible pump is designed for clean water. It is strictly prohibited to discharge sediment and mud in the newly drilled well. The voltage standard of the submersible pump is 380/50HZ. Other voltage levels of the submersible motor need to be customized. Underground cables must be waterproof and equipped with start-up equipment, such as distribution box, etc. Start-up equipment should have common motor comprehensive protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection, idling protection, etc., so that the protection device can trip in time in case of abnormal conditions. The pump must be reliably grounded during installation and use. It is prohibited to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. An obvious "anti-electric shock" sign must be set up where the pump is used. Before going down the well or installation, the inner cavity of the motor must be filled with distilled water or non-corrosive clean cold water, and the water / drain bolts must be tightened. When testing the pump on the ground, water must be injected into the pump chamber to lubricate the rubber bearings. The instantaneous start time shall not exceed one second to check whether the steering is correct, as indicated by the steering indicator. Pay attention to safety and ensure that the pump is erected to prevent overturning and causing injury. Strictly in accordance with the provisions of the pump lift and flow range of use, to prevent the pump with a large flow at low lift, or at high lift with a large pull, resulting in extreme wear of thrust bearings and other parts, the motor overload burnout. After the pump into the well, the need to measure the insulation resistance of the motor and the ground, not less than 100MΩ. After the start, regular observation of voltage and current, check whether the motor winding insulation meets the requirements of the provisions. If the temperature of the storage location is lower than the freezing point, the water in the motor cavity should be drained to prevent the water in the motor cavity from freezing and damaging the motor due to low temperature.

He Kupu Whakataki ki te Hanganga

Kupu whakataki poto o te hanganga: te nuinga tito wahi papu o te rakau papu, impeller, anga whakakorikori, rapa whanau, taki takirere tinana (waahanga kōwhiringa) me ētahi atu wāhanga. Ko te waahanga motuka ko te turanga, te pehanga e whakahaere ana i te kiriata, te peehi, te pereti pana, te nohoanga kaiarahi o raro, te stator, te rotor, te nohoanga kaiarahi o runga, te mowhiti onepu, te waahanga whakauru wai, te taura me etahi atu waahanga.

Ko nga ahuatanga matua o te hua ko:

1.The motor is a water-filled wet submersible three-phase asynchronous motor, the motor cavity is full of clean water, used to cool the motor and lubricate the bearing, the pressure regulating film at the bottom of the motor is used to adjust the expansion and contraction pressure difference of the water inside the body caused by the change of the temperature rise of the motor.

2, Hei aukati i te onepu i roto i te puna wai kia uru ki roto i te motuka, ko te pito o runga o te motuka motuka e mau ana ki nga hiri hinu e rua, ka whakauruhia he mowhiti kirikiri hei hanga i te hanganga aukati kirikiri.

3, Hei aukati i te rere o te papa papu i te wa e tiimata ana, ka honohia te papa papu me te motuka motuka e te hono, ka whakauruhia he peera o runga ki te taha o raro o te motuka.

4, Ko te whakahinuhinu o te motini me te papu e mau ana he whakahinuhinu wai.

5, Ko te motika stator awhiowhio he mea hanga o te kounga teitei submersible moto awhiowhio waea, ki te mahi insulation tiketike.

6, Ko te papu e hangaia ana e te CAD rorohiko, me te hanganga ngawari me te mahi hangarau pai.

Tāuta

(1) Whakaritenga i mua i te whakaurunga:
1. Tirohia mehemea ka tutuki te papu ruku ki nga tikanga whakamahi me te whanuitanga kua tohua ki te pukapuka.
2. Ma te whakamahi i te obiect taumaha me te diameter e rite ana ki te teitei o te diameter o waho o te papu ruku, ine mehemea ka uru te inneldiameter o te poka wai ki te papu ruku, me te ine mena ka tutuki te hohonutanga o te puna ki nga whakaritenga whakaurunga.
3. Tirohia mehemea he ma te rua o te puna me te wai pokarekare ranei. Kaua rawa e whakamahia he papu hiko ruku ki te horoi i te paru welor papu me te wai kirikiri kia kore e pakaru wawe te papu hiko ruku.
4. Tirohia mehemea he pai te tuunga o te rawhi whakaurunga welhead me te kaha ki te tu ki te kounga o te waahanga katoa.
5. Tirohia mehemea kua oti te whakaurunga o nga waahanga papu ruku me te tika kia rite ki te hoahoa huinga i roto i te pukapuka Tangohia te mata tātari ka huri i te hononga kia kite mena ka huri ngawari.
6. Wewetehia te wiri wai ka whakakiia te kohao motopaika ki te wai ma, kaua e pirau (tohu. me whakakiia ki runga), katahi ka whakakaha i te kopa wai. I muri i nga haora 12 o te werohia o te wai, kaua e iti iho i te 150M Q te parenga whakamarumaru o te motini ka ine ki te tepu wiri 500V.
7. Ko te hononga taura, tapahia he ringaringa rapa 120mm mai i tetahi pito o te taura puta me te taura taurite me te maripi a te kaiao hiko, ka wiri i te roa o nga waea matua e toru ki te ahua maeke, tihorea he uho parahi 20mm, waruhia te waikura. te paparanga ki waho o te waea parahi me te maripi, te kakahu kirikiri ranei, ka kuhu i nga pito waea hono e rua ki roto i te parepare. I muri i te herenga o te paparanga ki te waea parahi pai, whakapirihia kia pai, kia mau, me te onepu o tetahi. nga pupuhi i runga i te mata. Na, mo nga hononga e toru, whakamahia te riipene whakamaarama polyvester hei takai i roto i te ahua o te ahua o te tapae mo nga oko e toru. Takaia nga pito e rua o te paparanga takai kia mau ki te miro nyion, katahi ka whakamahi i te tikanga tatai ki te takai i te riipene mo nga papa e toru. Takaia te kaitahu ki waho ki te riipene whakamatao pehanga teitei mo nga paparanga e toru. Ka mutu, whakakopahia nga whenu e toru ka takaia mo nga paparanga e rima me te riipene pehanga teitei. Me tino herea ia paparanga, kia piri, kia piri hoki nga hononga o roto kia kore ai e kuhu te wai me te pakaru i te maataki, I muri i te takai, ruku ki te wai i te 20'c te pāmahana rūma mo te 12 haora, me te ine i te parenga whakamatao ki te tepu wiri. , kia kaua e iti iho i te 100M Ω

Ko te hoahoa tukanga waea waea kua honoa e whai ake nei:

8. Whakamahi i te mita maha ki te tirotiro mena kei te hono nga waea-waa-toru me te ahua taurite te parenga DC.
9. Tirohia mehemea kua taumaha te ara iahiko me te kaha o te hurihanga, katahi ka hono atu i te pana whakamaru i te taumaha, i nga taputapu tiimata ranei. Tirohia te Ripanga 2 mo nga tauira motuhake, katahi ka ringihia he peere wai ki roto i te papu wai mai i te putanga papu wai hei whakahinuhinu i nga rapa rapa i roto i te papu, katahi ka tuu te papu hiko ruku ki runga kia mau. ka tirohia mehemea e rite ana te ahunga urungi ki te tohu urungi. Ki te kore, whakawhitia nga hononga e rua o te taura e toru-waahanga. Katahi ka whakauruhia te tātari ka takatu ki te heke ki raro i te puna. Mena ka whakamahia i roto i nga waahi motuhake (penei i nga awaawa, i nga awaawa, i nga awa, i nga harotoroto, i nga harotoroto, me etahi atu), me tika te turanga o te papu hiko.

(2) Nga taputapu me nga taputapu whakauru:
1. Kotahi te rua o nga mekameka hiki mo te neke atu i te rua tana.
2. He tripod me te teitei poutū kaua e iti iho i te wha mita.
3. E rua nga taura iri (wire ropes) ka taea te kawe i te taumaha neke atu i te kotahi tana (ka taea te kawe i te taumaha o te huinga katoa o nga papu wai).
4. Tāutahia kia rua ngā rawhi (splints).
5. Nga wrenches, hama, wiriwiri, taputapu hiko me nga taputapu, aha atu.

(3)Tautanga papu hiko:
1. Ko te hoahoa whakaurunga o te papu hiko ruku e whakaatuhia ana i te Whakaaturanga 2. Ko nga rahinga whakaurunga motuhake e whakaatuhia ana i te Ripanga 3 "Rarangi o nga Rarangi Whakamutunga o te Pump Hiko Rakau".

2. Ko nga papu hiko ruku me te upoko iti iho i te 30 mita ka taea te whakairi tika ki roto i te puna ma te whakamahi i nga ngongo me nga taura waea, etahi atu taura hemp ranei ka taea te kawe i te taumaha katoa o te miihini, nga paipa wai, me te wai i roto i nga paipa.

3. Ko nga papu me te upoko neke atu i te 30 mita te whakamahi paipa maitai, a ko te raupapa whakaurunga e whai ake nei:
①Whakamahia he rawhi hei rawhi i te pito o runga o te wahanga papu wai (kua honoa te motini me te papu wai i tenei wa), hikitia me te mekameka iri, ka ata herea ki roto i te puna tae noa ki te kuhua te rawhi ki te upoko o te puna ka tango mekameka iri.
② Whakamahia etahi atu rawhi hei rawhi i te paipa, hikitia me te mekameka iri kia 15 cm te tawhiti atu i te flange, ka ata whakaheke. I waenganui i te flange paipa me te flange papu Whakanohoia te papa rapa ki te waahi ka whakakoia te paipa me te papu kia rite ki nga tutaki, nati me nga horoi puna.
③ Whakaarahia te papu ruuma kia paku, tangohia te rawhi i te pito o runga o te papu wai, herea te taura ki te paipa wai me te riipene kirihou, ka ata herea ki raro kia tuu te rawhi ki te upoko puna.
④Whakamahia taua tikanga ki te here i nga paipa wai katoa ki roto i te puna.
⑤I muri i te hono o te taura arataki ki te pana whakahaere, ka hono atu ki te hiko hiko e toru nga wahanga.

(4) Nga mea hei tohu i te wa o te whakaurunga:
1. Mēnā ka kitea he āhuatanga tāmii i te wā e mahi ana te kumara, huri, kumea ranei te paipa wai kia pai ai te taunga. Ki te kore tonu e mahi nga momo mahi, tena koaKaua e tohe te papu ki raro kia kore ai e pakaru te papu hiko ruku me te puna.
2. I te wa o te whakaurunga, me whakanoho he papa rapa ki te taha o ia paipa me te whakakaha kia rite.
3. Ka tukuna te papu wai ki roto i te puna, me tuu ki waenganui o te paipa puna kia kore ai e rere te papu ki te pakitara o te puna mo te wa roa, ka wiri te papu, ka tahia, ka wera te motini. .
4. Whakatauhia te hohonutanga o te papu wai ki raro o te puna i runga i te rere o te onepu me te parapara o te puna. Kaua e tanu te papu ki te paru. Ko te tawhiti mai i te papu wai ki raro o te puna ko te tikanga kaua e iti iho i te 3 mita (tirohia te Whakaahua 2).
5. Ko te hohonutanga o te urunga wai o te papu wai kia kaua e iti iho i te 1-1.5 mita mai i te taumata wai hihiri ki te kohanga uru wai (tirohia te Whakaahua 2). Ki te kore, ka ngawari te pakaru o nga papa papu wai.
6. Ko te hiki o te papu wai e kore e iti rawa. Ki te kore, me whakauru he paera kuaha ki runga i te paipa wai o te upoko o te puna ki te whakahaere i te rere o te papu ki te waahi rere reiti kia kore ai te motini e nui te utaina me te wera na te nui o te rere.
7. I te wa e rere ana te papu wai, me noho tonu te whakaputanga wai me te ara, kia mau tonu te naianei (i raro i nga tikanga mahi kua whakatauhia, ko te tikanga kaua e neke atu i te 10% o te waa kua tohua), kaore he wiri, he haruru ranei. Mena he mate kino, me whakamutu te miihini kia kitea te take me te whakakore.
8. I te wa e whakauru ana, whakarongo ki te whakatakotoranga o te waea motika motika (tirohia te Whakaahua 2). Ina he paipa rino te paipa wai, arahina mai i te rawhi o te upoko puna; ina he paipa kirihou te paipa wai, arahina mai i te tohu whenua o te papu hiko.

Te Tiaki me te Tiaki

1.I muri i te whakaurunga o te papu ruuma, tirohia te parenga whakaahuru me te kawe i nga wahanga e toru mai i te whakawhiti, tirohia mehemea kei te he te taputapu me te hononga o nga taputapu tiimata, mena kaore he raru, ka taea te timata te miihini whakamatautau, me te titiro mehemea ka nui ake nga panui tohu o te taputapu i te ngaohiko reiti me te naianei kua tohua ki runga i te papa ingoa i muri i te tiimatanga, ka tirohia mena he haruru me te wiri te ahua o te papu, ka mahi mena he mea noa nga mea katoa.
2.I muri i te mahi tuatahi o te papu mo nga haora e wha, me tutakina te motini ki te whakamatautau wawe i te parenga waiariki, a kaua e iti iho i te 0.5 megaohm tona uara.
3. I muri i te katinga o te papu, me timata i muri i te rima meneti kia kore ai e rere te wai o roto o te putorino me te nui o te motini me te wera.
4.I muri i te tuunga o te papu ki te mahi noa, kia roa ai tona oranga mahi, he mea tika kia tirohia mena he rite tonu te ngaohiko tuku, te mahi o naianei me te aukati i nga wa katoa. Mena ka kitea nga tikanga e whai ake nei, me tutakina tonu te papu ki te rapu raruraru.
- I roto i nga ahuatanga kua tohua, ka nui ake te 20%.
- Ka heke te taumata o te wai hihiri ki te waahanga uru wai, ka puta he wai mokowhiti.
- He kaha te wiri, te haruru ranei o te papu ruku.
- He iti ake te ngaohiko tuku i te 340 volts.
5.A fuse is burned out.
6.The water supply pipe is damaged.
7.The motor's thermal insulation resistance is lower than 0.5 megaohm.
Unit disassembly:
1.Untie the cable tie, remove the pipeline part, and remove the wire plate.
2.screw down the water bolt, put the water in the motor chamber.
3.remove the filter, loose the fixed screw on the coupling to fix the motor shaft.
4.screw down the bolt connecting the water inlet section with the motor, and separate the pump from the motor (pay attention to the unit cushion when separating, to prevent the bending of the pump shaft)
5.the disassembly sequence of the pump is: (see figure 1) water inlet section, impeller, diversion shell, impeller...... check valve body, when removing the impeller, use special tools to loosen the conical sleeve of the fixed impeller first, and avoid bending and bruising the pump shaft in the process of disassembly.
6.the disassembly process of the motor is: (see figure 1) place the motor on the platform, and remove the nuts, base, shaft head locking nut, thrust plate, key, lower guide bearing seat and double head bolt from the bottom of the motor in turn, and then take out the rotor (pay attention not to damage the wire package) and finally remove the connecting section and upper guide bearing seat.
7.unit assembly: before assembly, the rust and dirt of the parts should be cleaned, and the mating surface and fasteners coated with sealant, and then assembled in the opposite order of disassembly (the motor shaft moves up and down after assembly for about one millimeter), after assembly, the coupling should be flexible, and then the filter screen test machine. Submersible pumps shall be taken out of the well for dismantling and maintenance according to Article 5 after a year of operation, or less than a year of operation but two years of diving time, and the worn parts shall be replaced.