125QJP Peep Well Submersible Pump

QJP series fountain pump is a fountain pump with higher efficiency developed and researched by our factory. The pump motor core adopts high quality cold rolled silicon steel, which makes the pump have good magnetic conductivity and frequent start without heating.

The motor rotor ends use water as lubricant alloy copper sleeve instead of ball bearings, avoiding the problem of easy rust, rust and lack of oil wear and tear of the motor.

1, ukunikezwa kwamandla: isigaba sesithathu se-AC 380V (ukubekezelelana + / - 5%), 50HZ (ukubekezelelana + / - 1%).

2, ikhwalithi yamanzi:

(1) water temperature is not higher than 20 °C;

(2) okuqukethwe kokungcola okuqinile (isilinganiso sobuningi) akukho ngaphezu kuka-0.01%;

(3) PH inani (pH) 6.5-8.5;

(4) okuqukethwe kwe-hydrogen sulfide akukhulu kuno-1.5mg/L;

(5) okuqukethwe kwe-chloride ion akukhulu kuno-400mg/L.

I-3, i-motor ivaliwe noma isakhiwo esimanzi esigcwele amanzi, ngaphambi kokusetshenziswa i-submersible motor cavity kumele igcwele amanzi ahlanzekile, ukuvimbela ukugcwala okungamanga, bese uqinisa umjovo wamanzi, ama-bolts okukhipha umoya, ngaphandle kwalokho akuvunyelwe ukusebenzisa.

I-4, iphampu engaphansi kwamanzi kufanele icwiliswe ngokuphelele emanzini, ukujula kwe-diving akukhulu kune-70m, i-bottom of the submersible pump kusuka phansi komthombo ayikho ngaphansi kwama-3m.

5, ukugeleza kwamanzi omthombo kufanele kukwazi ukuhlangabezana nokuphuma kwamanzi kwepompo engaphansi kwamanzi nokusebenza okuqhubekayo, ukuphuma kwamanzi empompi engaphansi kwamanzi kufanele kulawulwe izikhathi ezingu-0.7 - 1.2 zokugeleza okulinganiselwe.

I-6, umthombo kufanele uqonde, ipompo ye-submersible ayikwazi ukusetshenziswa noma ilahlwe, ukusetshenziswa okuqondile kuphela.

7, iphampu engaphansi kwamanzi kufanele ifaniswe nekhebula ngokwezidingo, kanye nedivayisi yokuvikela ukugcwala ngokweqile kwangaphandle.

8, iphampu inqatshelwe ngokuphelele ngaphandle komshini wokuhlola amanzi ongenamthwalo

1, well submersible pump for clean water pump, prohibit the new well, pumping sediment and muddy water,

2, well water pump voltage grade of 380/50HZ, the use of other voltage grades of submersible motors need to be customized. The underground cable must use waterproof cable, must be equipped with starting equipment, such as distribution box, start not ready should have commonly used motor comprehensive protection function, such as short circuit overload protection, phase protection, undervoltage protection, grounding protection, idling protection, in case of abnormal conditions, the protection device should be timely action trip.

3, the installation and use of the pump must be reliably grounded, prohibit the push and pull switch when the hands and feet are wet, the installation and maintenance of the pump must be cut off the power supply, the use of the pump place to set up "to prevent electric shock" obvious signs:

4, down the well or before installation, the motor cavity must be filled with distilled water or non-corrosive clean cold boiling water, tighten the / water bolt, the pump on the ground test run, must be to the pump chamber water lubrication rubber bearings, instant start not more than a second, see whether the steering is the same as the steering instructions. When the pump is upright, pay attention to safety, prevent overturning injury.

5, ngokuqinile ngokwezinhlinzeko zokuphakanyiswa kwepompo, ububanzi bokugeleza bokusetshenziswa, ukuvimbela ukugeleza okuphansi noma amandla okumpompa aphakeme kakhulu, i-thrust bear nezinye izingxenye zokugqokwa, ukugcwala kwemoto kushisiwe.

6, after the pump down the well, the measurement of the motor to the ground insulation resistance should not be less than 100M, after the start to observe the voltage and current, check the motor winding insulation, whether in line with the requirements; pump storage location temperature if less than freezing point, should be dry the motor cavity water, prevent the motor cavity water ice damage caused by low temperature.

Ukwethulwa okufushane kwesakhiwo: ingxenye yepompo yakhiwe ikakhulukazi i-pump shaft, i-impeller, igobolondo lokuphambukisa, ukuthwala irabha, umzimba wokuhlola i-valve (izingxenye ozikhethela) nezinye izakhi. Ingxenye ye-Motor ikakhulukazi yakhiwe i-base, ifilimu elawula ingcindezi, i-thrust bearing, ipuleti le-thrust, isihlalo esingaphansi somhlahlandlela, i-stator, i-rotor, isihlalo esiphezulu esiphethe umhlahlandlela, indandatho yesihlabathi, ingxenye yokungena kwamanzi, ikhebula nezinye izingxenye.

Izici eziyinhloko zomkhiqizo zihlanganisa:

 I-1, I-motor iyi-motor egcwele amanzi emanzi e-submersible enezigaba ezintathu ze-asynchronous motor, i-motor cavity igcwele amanzi ahlanzekile, esetshenziselwa ukupholisa i-motor kanye nokugcoba i-bearing, ifilimu elawula ukucindezela phansi kwe-motor isetshenziselwa ukulungisa. ukunwetshwa kanye nomehluko wengcindezi yokufinyela kwamanzi ngaphakathi emzimbeni okubangelwa ukushintsha kokukhuphuka kwezinga lokushisa kwemoto.

 I-2, Ukuze uvimbele isihlabathi esisemanzini omthombo ukuthi singangeni emotweni, indawo engaphezulu ye-motor shaft ifakwe izimpawu ezimbili zamafutha, futhi indandatho yesihlabathi ifakwe ukwakha isakhiwo sokuvimbela isihlabathi.

 I-3, Ukuze uvimbele i-pump shaft ukuthi ingaqhubeki lapho iqala, i-pump shaft kanye ne-motor shaft ixhunywe ngokuhlanganisa, futhi i-top thrust bear ifakwe engxenyeni engezansi ye-motor.

 4, Ukugcotshwa kwenjini kanye nephampu ephethe ukugcotshwa kwamanzi.

 I-5, i-motor stator winding yenziwe ngocingo olusezingeni eliphezulu lwe-submersible motor winding, olusebenza kahle kakhulu.

 6, Iphampu iklanywe yi-CAD yekhompyutha, enesakhiwo esilula nokusebenza okuhle kobuchwepheshe.

(1) Ukulungiselela ngaphambi kokufakwa:
1. Hlola ukuthi ingabe iphampu engaphansi kwamanzi iyahlangabezana yini nezimo zokusetshenziswa kanye nobubanzi obushiwo kubhukwana.
2. Usebenzisa i-obiect esindayo enobubanzi obulingana nobukhulu bedayamitha yangaphandle yephampu engaphansi kwamanzi, linganisa ukuthi i-inneldiameter yomthombo ingalingana nephampu engaphansi kwamanzi, futhi ulinganise ukuthi ukujula komthombo kuyahlangabezana yini nezidingo zokufakwa.
3. Hlola ukuthi umthombo uhlanzekile yini nokuthi amanzi omthombo anodaka. Ungalokothi usebenzise iphampu kagesi engaphansi kwamanzi ukugeza udaka lwepompo le-welor namanzi esihlabathi ukuze ugweme ukulimala ngaphambi kwesikhathi kwepompo kagesi engaphansi kwamanzi.
4. Hlola ukuthi indawo ye-welhead yokufaka i-welhead ifanelekile yini nokuthi ingakwazi yini ukumelana nekhwalithi yayo yonke iyunithi.
5. Hlola ukuthi izingxenye zepompo ezingaphansi kwamanzi ziphelele yini futhi zifakwe ngendlela efanele ngokomdwebo womhlangano osebhukwini Susa isikrini sokuhlunga bese uzungezisa ukuhlanganisa ukuze ubone ukuthi siyazungeza yini
6. Khipha isikulufu samanzi bese ugcwalisa imbobo yesithuthuthu ngamanzi ahlanzekile, angagqwali (qaphela. qiniseka ukuthi uyasigcwalisa), bese uqinisa isikrufu samanzi. Ngemuva kwamahora ayi-12 omjovo wamanzi, ukumelana nokufakwa kwenjini akufanele kube ngaphansi kuka-150M Q uma kulinganiswa netafula lokunyakazisa elingu-500V.
7. Cable joint, cut off a 120mm rubber sleeve from one end of the outgoing cable and the matching cable with an electrician's knifethen stagger the length of the three core wires in a stepped shape, peel off a 20mm copper core, scrape of the oxide layer on theoutside of the copper wire with a knife or sand cloth, and insert the two connected wire ends in palirs.After tying the layer tightly with fine copper wire, solder it thoroughly and firmly, and sand of any. burrs on the surface. Then, forthe three joints, use polyvester insulation tape to wrap them in a semi stacked manner for three lavers. Wrap the two ends of thewrapping layer tightywith nyion thread,and then use a semi stacked method to wrap the tape for three layers. Wrap the outellayer with high-pressure insulation tape for three layers. Finally, fold the threestrands together and repeatedly wrap them for fivelayers with high-pressure tape. Each layer must be tightly tied, and the interlayer joints must be tight and fimm to prevent water frompenetrating and damaging the insulation, After wrapping, soak in water at room temperature of 20 ’c for 12 hours, and measurethe insulation resistance with a shaking table, which should not be less than 100M Ω

Umdwebo wenqubo yokufaka izintambo zekhebula umi kanje:

8. Sebenzisa i-multimeter ukuze uhlole ukuthi izintambo zezigaba ezintathu zixhumekile yini nokuthi ukumelana ne-DC cishe kulinganiselwe.
9. Hlola ukuthi umthamo wesekethe kanye ne-transformer ugcwele ngokweqile, bese uxhuma iswishi yokuvikela ukulayisha ngokweqile noma okokusebenza kokuqala. Bheka Ithebula 2 ukuze uthole amamodeli athile, bese uThela ibhakede lamanzi empompini yamanzi usuka endaweni yepompo yamanzi ukuze ugcobe amabheringi erabha epompo, bese ubeka iphampu kagesi engaphansi kwamanzi iqonde futhi inganyakazi.Qala (ingabi ngaphezu komzuzwana owodwa) futhi uhlole ukuthi isiqondiso sokuqondisa siyahambisana yini nophawu lokuqondisa. Uma kungenjalo, shintsha noma yiziphi izixhumi ezimbili zekhebula lezigaba ezintathu.Bese ufaka isihlungi bese ulungiselela ukwehla ngomthombo. Uma isetshenziswa ngezikhathi ezikhethekile (njengemisele, imisele, imifula, amachibi, amachibi, njll.), iphampu kagesi kufanele ibekwe phansi ngendlela enokwethenjelwa.

(2)Imishini yokufaka namathuluzi:
1. Ipheya elilodwa lamaketango okuphakamisa amathani angaphezu kwamabili.
2. I-tripod enobude obuqondile obungekho ngaphansi kwamamitha amane.
3. Izintambo ezimbili ezilengayo (izintambo zocingo) ezingathwala isisindo esingaphezu kwethani elilodwa (zingathwala isisindo sesethi ephelele yamaphampu amanzi).
4. Faka amapheya amabili ezinsimbi (ama-splint).
5. Izikele, izando, izikulufu, amathuluzi kagesi nezinsimbi, njll.

(3)Ukufakwa kwephampu kagesi:
1. Umdwebo wokufakwa kwephampu kagesi engaphansi kwamanzi uboniswa kuMfanekiso 2. Ubukhulu obuthile bokufaka buboniswa kuThebula lesi-3 "Uhlu Lobukhulu Bokufakwa Kwephampu Kagesi Engaphansi".

2. Amaphampu kagesi angaphansi kwamanzi anekhanda elingaphansi kwamamitha angu-30 angaphakanyiselwa ngqo emthonjeni kusetshenziswa amapayipi nezintambo zocingo noma ezinye izintambo ze-hemp ezingathwala isisindo esigcwele sawo wonke umshini, amapayipi amanzi, namanzi emapayipini.

3. Amaphampu anekhanda elingaphezu kwamamitha angu-30 asebenzisa amapayipi ensimbi, futhi ukulandelana kokufakwayo kungokulandelayo:
①Sebenzisa i-clamp ukuze ubambe ingxenye engenhla yengxenye yepompo yamanzi (injini nepompo yamanzi kuxhunyiwe ngalesi sikhathi), yiphakamise ngeketango elilengayo, bese uyibopha kancane kancane emthonjeni uze ufake i-clamp ekhanda lomthombo bese ukhipha iketango elilengayo.
② Sebenzisa amanye ama-clamp ukuze ubambe ipayipi, uliphakamise ngeketango elilengayo eliqhele ngamasentimitha angu-15 ukusuka ku-flange, bese ulehlisa kancane. Phakathi kwe-flange yepayipi ne-pump flangeFaka iphedi yenjoloba endaweni bese uqinisa ipayipi bese umpompa ngokulinganayo ngamabhawodi, amantongomane namawasha asentwasahlobo.
③ Phakamisa iphampu engaphansi kwamanzi kancane, khipha intambo engxenyeni engenhla yepompo yamanzi, bopha intambo ngokuqinile epayipini lamanzi ngetheyiphu yepulasitiki, bese uyibopha kancane kancane kuze kube yilapho I-clamp ibekwe emthonjeni.
④Sebenzisa indlela efanayo ukubopha wonke amapayipi amanzi emthonjeni.
⑤Ngemva kokuthi ikhebuli ephumayo ixhunywe kusiwishi sokulawula, ixhunywa ekunikezeni amandla kwezigaba ezintathu.

(4) Izinto okufanele uziqaphele ngesikhathi sokufakwa:
1. Uma i-jamming itholakala phakathi nenqubo yokumpompa, vula noma udonse ipayipi lamanzi ukuze unqobe indawo yokuma. Uma izinyathelo ezihlukahlukene zingasebenzi, sicelaUngaphoqeleli iphampu phansi ukuze ugweme ukulimala kwepompo kagesi engaphansi kwamanzi kanye nomthombo.
2. Ngesikhathi sokufakwa, i-rubber pad kufanele ibekwe ku-flange yepayipi ngayinye futhi iqiniswe ngokulinganayo.
3. Lapho iphampu yamanzi yehliselwa emthonjeni, kufanele ibekwe phakathi nepayipi lomthombo ukuze ivimbele ukuthi iphampu ingagijimi odongeni lomthombo isikhathi eside, okubangela ukuba iphampu inyakaze futhi injini ishanele futhi ishise. .
4. Thola ukujula kwepompo yamanzi ukuya phansi komthombo ngokwesihlabathi esigelezayo kanye nezimo zodaka lomthombo. Ungangcwabi iphampu odakeni. Ibanga ukusuka empompini ukuya phansi komthombo ngokuvamile alikho ngaphansi kwamamitha amathathu (bheka uMdwebo 2).
5. Ukujula kokungena kwamanzi kwephampu yamanzi kufanele kungabi ngaphansi kwamamitha angu-1-1.5 ukusuka ezingeni lamanzi aguquguqukayo kuya endaweni yokungena kwamanzi (bheka uMdwebo 2). Uma kungenjalo, ama-bearings epompo yamanzi angase alimale kalula.
6. Ukuphakanyiswa kwepompo yamanzi angeke kube phansi kakhulu. Uma kungenjalo, i-valve yesango idinga ukufakwa epayipini lamanzi elisemthonjeni ukuze kulawulwe ukugeleza kwepompo endaweni elinganiselwe yokugeleza ukuze kuvinjwe injini ukuthi ingagcwali kakhulu futhi ishiswe ngenxa yamazinga amakhulu okugeleza.
7. Lapho ipompo yamanzi isebenza, ukuphuma kwamanzi kufanele kuqhubeke futhi ngisho, okwamanje kufanele kuzinzile (ngaphansi kwezimo zokusebenza ezilinganiselwe, ngokuvamile kungabi ngaphezu kuka-10% wamanje olinganiselwe), futhi akufanele kube nokudlidliza noma umsindo. Uma kukhona okungahambi kahle, umshini kufanele umiswe ukuze kutholwe imbangela futhi kuqedwe.
8. Lapho ufaka, naka ukumiswa kocingo lwe-motor grounding wire (bheka Umfanekiso 2). Uma ipayipi lamanzi liyipayipi lensimbi, lihole kusukela ku-wellhead clamp; lapho ipayipi lamanzi liyipayipi lepulasitiki, lihole ukusuka endaweni yokubeka phansi yepompo kagesi.

• 1.Ngemva kokufakwa kwepompo ye-submersible, hlola ukumelana nokufakwa kwe-insulation kanye nokuqhutshwa kwesigaba sesithathu kusuka ku-switch futhi, hlola ukuthi ithuluzi kanye nokuxhumeka kwemishini yokuqala akulungile, uma kungekho nkinga, umshini wokuhlola ungaqalwa, futhi ubheke ukuthi ukufundwa kwezinkomba zethuluzi kuyawedlula yini amandla kagesi alinganiselwe namandla ashiwo ku-nameplate ngemva kokuqala, futhi ubheke ukuthi ingabe iphampu inomsindo nokudlidliza, bese iqala ukusebenza uma yonke into ijwayelekile.
• I-2.Ngemva kokusebenza kokuqala kwepompo amahora amane, i-motor kufanele ivalwe ukuze ihlole ukumelana nokushisa okushisayo ngokushesha, futhi inani layo akufanele libe ngaphansi kwe-0.5 megaohm.
• 3.Ngemva kokuba ipompo ivaliwe, kufanele iqalwe ngemva kwemizuzu emihlanu ukuvimbela ikholomu yamanzi epayipini ukuthi iphinde igcwaliswe ngokuphelele futhi ibangele amandla amanje amaningi kanye nokuvutha.
• I-4.Ngemva kokuba ipompo ifakwe ekusebenzeni okujwayelekile, ukuze kwandiswe impilo yayo yesevisi, kuyadingeka ukuhlola ukuthi i-voltage yokuhlinzeka, ukusebenza kwamanje kanye nokumelana nokushisa kuvamile njalo. Uma izimo ezilandelayo zitholakala, iphampu kufanele ivalwe ngokushesha ukuze kuxazululwe inkinga.
•  
• - Esimeni esilinganiselwe, okwamanje idlula ama-20%.
• - Izinga lamanzi aguquguqukayo lehla liye endaweni yokungena kwamanzi, okubangela amanzi ngezikhathi ezithile.
• - Iphampu engaphansi kwamanzi inokudlidliza okukhulu noma umsindo.
• - I-voltage yokuhlinzeka ingaphansi kuka-340 volts.
• - I-fuse iyashiswa.
• - Ipayipi lokuphakela amanzi lonakele.
• - Ukumelana nokushisa kwe-motor kungaphansi kuka-0.5 megaohm.
•  
• Unit disassembly:
• (1)Untie the cable tie, remove the pipeline part, and remove the wire plate.
• (2)screw down the water bolt, put the water in the motor chamber.
• (3)remove the filter, loose the fixed screw on the coupling to fix the motor shaft.
• (4)screw down the bolt connecting the water inlet section with the motor, and separate the pump from the motor (pay attention to the unit cushion when separating, to prevent the bending of the pump shaft)
• (5)the disassembly sequence of the pump is: (see figure 1) water inlet section, impeller, diversion shell, impeller...... check valve body, when removing the impeller, use special tools to loosen the conical sleeve of the fixed impeller first, and avoid bending and bruising the pump shaft in the process of disassembly.
• (6)the disassembly process of the motor is: (see figure 1) place the motor on the platform, and remove the nuts, base, shaft head locking nut, thrust plate, key, lower guide bearing seat and double head bolt from the bottom of the motor in turn, and then take out the rotor (pay attention not to damage the wire package) and finally remove the connecting section and upper guide bearing seat.
• (7)unit assembly: before assembly, the rust and dirt of the parts should be cleaned, and the mating surface and fasteners coated with sealant, and then assembled in the opposite order of disassembly (the motor shaft moves up and down after assembly for about one millimeter), after assembly, the coupling should be flexible, and then the filter screen test machine. Submersible pumps shall be taken out of the well for dismantling and maintenance according to Article 5 after a year of operation, or less than a year of operation but two years of diving time, and the worn parts shall be replaced.
•  

 1, khipha amanzi ku-motor cavity (ikakhulukazi ebusika ukuvimbela injini ukuba ingaqhwa), futhi ubophe ikhebula kahle.

 2, store in an indoor room without corrosive substances and gases, with a temperature below 40 °C.

 3, ukusetshenziswa isikhathi eside kufanele sinake ukuvimbela nokugqwala amaphampu submersible.

01 Ukuphuza amanzi omthombo ojulile

02 Ukuhlinzekwa kwamanzi asezingeni eliphezulu

03 amanzi asezintabeni 

04 amanzi ombhoshongo

05 Ukuchelela kwezolimo

06 ukuchelela engadini

07 amanzi omfula

08 amanzi asekhaya