I-QS Special Submersible Electric Pump Yamanzi Ahlanzekile Namanzi Olwandle Aquaculture

Well-designed sand-proof large flow water system, using water-immersed motor, no oil after burning machine does not pollute water. Suitable for freshwater aquaculture extraction of river water, sea water oxygen. Flow range 100-1000m3/h, lift 3-100m, power 3-100KW.

1, ukunikezwa kwamandla: isigaba sesithathu se-AC 380V (ukubekezelelana + / - 5%), 50HZ (ukubekezelelana + / - 1%).

2, ikhwalithi yamanzi:

(1) izinga lokushisa lamanzi alikho ngaphezu kuka-20 °C;

(2) okuqukethwe kokungcola okuqinile (isilinganiso sobuningi) akukho ngaphezu kuka-0.01%;

(3) PH inani (pH) 6.5-8.5;

(4) okuqukethwe kwe-hydrogen sulfide akukhulu kuno-1.5mg/L;

(5) okuqukethwe kwe-chloride ion akukhulu kuno-400mg/L.

I-3, i-motor ivaliwe noma isakhiwo esimanzi esigcwele amanzi, ngaphambi kokusetshenziswa i-submersible motor cavity kumele igcwele amanzi ahlanzekile, ukuvimbela ukugcwala okungamanga, bese uqinisa umjovo wamanzi, ama-bolts okukhipha umoya, ngaphandle kwalokho akuvunyelwe ukusebenzisa.

I-4, iphampu engaphansi kwamanzi kufanele icwiliswe ngokuphelele emanzini, ukujula kwe-diving akukhulu kune-70m, i-bottom of the submersible pump kusuka phansi komthombo ayikho ngaphansi kwama-3m.

5, ukugeleza kwamanzi omthombo kufanele kukwazi ukuhlangabezana nokuphuma kwamanzi kwepompo engaphansi kwamanzi nokusebenza okuqhubekayo, ukuphuma kwamanzi empompi engaphansi kwamanzi kufanele kulawulwe izikhathi ezingu-0.7 - 1.2 zokugeleza okulinganiselwe.

I-6, umthombo kufanele uqonde, ipompo ye-submersible ayikwazi ukusetshenziswa noma ilahlwe, ukusetshenziswa okuqondile kuphela.

7, iphampu engaphansi kwamanzi kufanele ifaniswe nekhebula ngokwezidingo, kanye nedivayisi yokuvikela ukugcwala ngokweqile kwangaphandle. 8, iphampu inqatshelwe ngokuphelele ngaphandle komshini wokuhlola amanzi ongenamthwalo

 This well submersible pump is a clean water pump. It is strictly prohibited to excavate new wells, discharge sediments and muddy water. The voltage rating of the pump is 380/50 hertz, and other voltage ratings are not allowed. The submersible motor needs to be customized, and the underground cable must be waterproof cable, and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have common motor comprehensive protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection, etc. In order to prevent abnormal conditions, the protection device should be timely trip. During the installation and use process, the pump must be reliably grounded. It is strictly prohibited to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. An obvious "anti-electric shock" sign must be set up where the pump is used. Before going down the well or installing, the motor must fill the inner cavity with distilled water or non-corrosive clean cold water, and the inlet and outlet bolts must be tightened. When testing the pump, the pump cavity must be filled with water to lubricate the rubber bearings, and the instant start time shall not exceed one second to check whether the direction is correct. Pay attention to safety when lifting, and prevent the overturning of the pump from causing injury. Strictly according to the provisions of the pump lift and flow range, to prevent the pump in low lift when the large flow or in high lift when the large pull, resulting in serious wear and tear of thrust bearings and other parts, causing motor overload and burnout. After the pump into the well, the insulation resistance between the motor and the ground should not be less than 100MΩ, after the start of regular observation of voltage and current, and check whether the motor winding insulation meets the requirements; if the pump storage temperature below freezing, the water in the motor cavity should be discharged to prevent the cold temperature caused by the motor cavity water icing and damage the motor due to low temperature.

Ukwethulwa okufushane kwesakhiwo: ingxenye yepompo yakhiwe ikakhulukazi i-pump shaft, i-impeller, igobolondo lokuphambukisa, ukuthwala irabha, umzimba wokuhlola i-valve (izingxenye ozikhethela) nezinye izakhi. Ingxenye ye-Motor ikakhulukazi yakhiwe i-base, ifilimu elawula ingcindezi, i-thrust bearing, ipuleti le-thrust, isihlalo esingaphansi somhlahlandlela, i-stator, i-rotor, isihlalo esiphezulu esiphethe umhlahlandlela, indandatho yesihlabathi, ingxenye yokungena kwamanzi, ikhebula nezinye izingxenye.

Izici eziyinhloko zomkhiqizo zihlanganisa:

 I-1, I-motor iyi-motor egcwele amanzi emanzi e-submersible enezigaba ezintathu ze-asynchronous motor, i-motor cavity igcwele amanzi ahlanzekile, esetshenziselwa ukupholisa i-motor kanye nokugcoba i-bearing, ifilimu elawula ukucindezela phansi kwe-motor isetshenziselwa ukulungisa. ukunwetshwa kanye nomehluko wengcindezi yokufinyela kwamanzi ngaphakathi emzimbeni okubangelwa ukushintsha kokukhuphuka kwezinga lokushisa kwemoto.

 I-2, Ukuze uvimbele isihlabathi esisemanzini omthombo ukuthi singangeni emotweni, indawo engaphezulu ye-motor shaft ifakwe izimpawu ezimbili zamafutha, futhi indandatho yesihlabathi ifakwe ukwakha isakhiwo sokuvimbela isihlabathi.

 I-3, Ukuze uvimbele i-pump shaft ukuthi ingaqhubeki lapho iqala, i-pump shaft kanye ne-motor shaft ixhunywe ngokuhlanganisa, futhi i-top thrust bear ifakwe engxenyeni engezansi ye-motor.

 4, Ukugcotshwa kwenjini kanye nephampu ephethe ukugcotshwa kwamanzi.

 I-5, i-motor stator winding yenziwe ngocingo olusezingeni eliphezulu lwe-submersible motor winding, olusebenza kahle kakhulu.

 6, Iphampu iklanywe yi-CAD yekhompyutha, enesakhiwo esilula nokusebenza okuhle kobuchwepheshe.

(1) Ukulungiselela ngaphambi kokufakwa:
1. Hlola ukuthi ingabe iphampu engaphansi kwamanzi iyahlangabezana yini nezimo zokusetshenziswa kanye nobubanzi obushiwo kubhukwana.
2. Usebenzisa i-obiect esindayo enobubanzi obulingana nobukhulu bedayamitha yangaphandle yephampu engaphansi kwamanzi, linganisa ukuthi i-inneldiameter yomthombo ingalingana nephampu engaphansi kwamanzi, futhi ulinganise ukuthi ukujula komthombo kuyahlangabezana yini nezidingo zokufakwa.
3. Hlola ukuthi umthombo uhlanzekile yini nokuthi amanzi omthombo anodaka. Ungalokothi usebenzise iphampu kagesi engaphansi kwamanzi ukugeza udaka lwepompo le-welor namanzi esihlabathi ukuze ugweme ukulimala ngaphambi kwesikhathi kwepompo kagesi engaphansi kwamanzi.
4. Hlola ukuthi indawo ye-welhead yokufaka i-welhead ifanelekile yini nokuthi ingakwazi yini ukumelana nekhwalithi yayo yonke iyunithi.
5. Hlola ukuthi izingxenye zepompo ezingaphansi kwamanzi ziphelele yini futhi zifakwe ngendlela efanele ngokomdwebo womhlangano osebhukwini Susa isikrini sokuhlunga bese uzungezisa ukuhlanganisa ukuze ubone ukuthi siyazungeza yini
6. Khipha isikulufu samanzi bese ugcwalisa imbobo yesithuthuthu ngamanzi ahlanzekile, angagqwali (qaphela. qiniseka ukuthi uyasigcwalisa), bese uqinisa isikrufu samanzi. Ngemuva kwamahora ayi-12 omjovo wamanzi, ukumelana nokufakwa kwenjini akufanele kube ngaphansi kuka-150M Q uma kulinganiswa netafula lokunyakazisa elingu-500V.
7. Ijoyinti lekhebula, sika umkhono wenjoloba ongu-120mm ohlangothini olulodwa lwekhebula ephumayo kanye nekhebuli ehambisanayo ngommese womuntu osebenza ngogesi bese unyakazisa ubude bezintambo ezintathu eziyinhloko ngendlela enyanyisiwe, hlubula inkaba yethusi engu-20mm, klwelwe i-oxide. ungqimba olungaphandle kocingo lwethusi ngommese noma indwangu yesihlabathi, bese ufaka iziphetho zezintambo ezimbili ezixhunyiwe kuma-palirs.Ngemva kokubopha ungqimba ngokuqinile ngocingo lwethusi olucolisekileyo, luthengise kahle futhi luqine, nesihlabathi sanoma iyiphi. ama-burrs ebusweni. Bese, kumajoyinti amathathu, sebenzisa itheyiphu yokufaka i-polyvester ukuze uwasonge ngendlela enqwabelene kancane ezitsheni ezintathu. Goqa iziphetho ezimbili zongqimba olugoqayo luqine ngomucu we-nyion, bese usebenzisa indlela eyisitakikhi esincane ukusonga itheyiphu izendlalelo ezintathu. Gcoba i-outellayer nge-high-pressure insulation tape yezendlalelo ezintathu. Ekugcineni, hlanganisa imicu emithathu bese uyigoqa ngokuphindaphindiwe izendlalelo ezinhlanu nge-tape yokucindezela okuphezulu. Ungqimba ngalunye kufanele luboshwe ngokuqinile, futhi amalunga e-interlayer kufanele aqine futhi aqine ukuvimbela amanzi ukuthi angangeni futhi alimaze ukufakwa, Ngemva kokusonga, cwilisa emanzini ekamelweni lokushisa elingu-20 'c amahora angu-12, futhi ulinganise ukumelana nokushisa ngetafula elinyakazayo. , okungafanele ibe ngaphansi kuka-100M Ω

Umdwebo wenqubo yokufaka izintambo zekhebula umi kanje:

8. Sebenzisa i-multimeter ukuze uhlole ukuthi izintambo zezigaba ezintathu zixhumekile yini nokuthi ukumelana ne-DC cishe kulinganiselwe.
9. Hlola ukuthi umthamo wesekethe kanye ne-transformer ugcwele ngokweqile, bese uxhuma iswishi yokuvikela ukulayisha ngokweqile noma okokusebenza kokuqala. Bheka Ithebula 2 ukuze uthole amamodeli athile, bese uThela ibhakede lamanzi empompini yamanzi usuka endaweni yepompo yamanzi ukuze ugcobe amabheringi erabha epompo, bese ubeka iphampu kagesi engaphansi kwamanzi iqonde futhi inganyakazi.Qala (ingabi ngaphezu komzuzwana owodwa) futhi uhlole ukuthi isiqondiso sokuqondisa siyahambisana yini nophawu lokuqondisa. Uma kungenjalo, shintsha noma yiziphi izixhumi ezimbili zekhebula lezigaba ezintathu.Bese ufaka isihlungi bese ulungiselela ukwehla ngomthombo. Uma isetshenziswa ngezikhathi ezikhethekile (njengemisele, imisele, imifula, amachibi, amachibi, njll.), iphampu kagesi kufanele ibekwe phansi ngendlela enokwethenjelwa.

(2)Imishini yokufaka namathuluzi:
1. Ipheya elilodwa lamaketango okuphakamisa amathani angaphezu kwamabili.
2. I-tripod enobude obuqondile obungekho ngaphansi kwamamitha amane.
3. Izintambo ezimbili ezilengayo (izintambo zocingo) ezingathwala isisindo esingaphezu kwethani elilodwa (zingathwala isisindo sesethi ephelele yamaphampu amanzi).
4. Faka amapheya amabili ezinsimbi (ama-splint).
5. Izikele, izando, izikulufu, amathuluzi kagesi nezinsimbi, njll.

(3)Ukufakwa kwephampu kagesi:
1. Umdwebo wokufakwa kwephampu kagesi engaphansi kwamanzi uboniswa kuMfanekiso 2. Ubukhulu obuthile bokufaka buboniswa kuThebula lesi-3 "Uhlu Lobukhulu Bokufakwa Kwephampu Kagesi Engaphansi".

2. Amaphampu kagesi angaphansi kwamanzi anekhanda elingaphansi kwamamitha angu-30 angaphakanyiselwa ngqo emthonjeni kusetshenziswa amapayipi nezintambo zocingo noma ezinye izintambo ze-hemp ezingathwala isisindo esigcwele sawo wonke umshini, amapayipi amanzi, namanzi emapayipini.

3. Amaphampu anekhanda elingaphezu kwamamitha angu-30 asebenzisa amapayipi ensimbi, futhi ukulandelana kokufakwayo kungokulandelayo:
①Sebenzisa i-clamp ukuze ubambe ingxenye engenhla yengxenye yepompo yamanzi (injini nepompo yamanzi kuxhunyiwe ngalesi sikhathi), yiphakamise ngeketango elilengayo, bese uyibopha kancane kancane emthonjeni uze ufake i-clamp ekhanda lomthombo bese ukhipha iketango elilengayo.
② Sebenzisa amanye ama-clamp ukuze ubambe ipayipi, uliphakamise ngeketango elilengayo eliqhele ngamasentimitha angu-15 ukusuka ku-flange, bese ulehlisa kancane. Phakathi kwe-flange yepayipi ne-pump flangeFaka iphedi yenjoloba endaweni bese uqinisa ipayipi bese umpompa ngokulinganayo ngamabhawodi, amantongomane namawasha asentwasahlobo.
③ Phakamisa iphampu engaphansi kwamanzi kancane, khipha intambo engxenyeni engenhla yepompo yamanzi, bopha intambo ngokuqinile epayipini lamanzi ngetheyiphu yepulasitiki, bese uyibopha kancane kancane kuze kube yilapho I-clamp ibekwe emthonjeni.
④Sebenzisa indlela efanayo ukubopha wonke amapayipi amanzi emthonjeni.
⑤Ngemva kokuthi ikhebuli ephumayo ixhunywe kusiwishi sokulawula, ixhunywa ekunikezeni amandla kwezigaba ezintathu.

(4) Izinto okufanele uziqaphele ngesikhathi sokufakwa:
1. Uma i-jamming itholakala phakathi nenqubo yokumpompa, vula noma udonse ipayipi lamanzi ukuze unqobe indawo yokuma. Uma izinyathelo ezihlukahlukene zingasebenzi, sicelaUngaphoqeleli iphampu phansi ukuze ugweme ukulimala kwepompo kagesi engaphansi kwamanzi kanye nomthombo.
2. Ngesikhathi sokufakwa, i-rubber pad kufanele ibekwe ku-flange yepayipi ngayinye futhi iqiniswe ngokulinganayo.
3. Lapho iphampu yamanzi yehliselwa emthonjeni, kufanele ibekwe phakathi nepayipi lomthombo ukuze ivimbele ukuthi iphampu ingagijimi odongeni lomthombo isikhathi eside, okubangela ukuba iphampu inyakaze futhi injini ishanele futhi ishise. .
4. Thola ukujula kwepompo yamanzi ukuya phansi komthombo ngokwesihlabathi esigelezayo kanye nezimo zodaka lomthombo. Ungangcwabi iphampu odakeni. Ibanga ukusuka empompini ukuya phansi komthombo ngokuvamile alikho ngaphansi kwamamitha amathathu (bheka uMdwebo 2).
5. Ukujula kokungena kwamanzi kwephampu yamanzi kufanele kungabi ngaphansi kwamamitha angu-1-1.5 ukusuka ezingeni lamanzi aguquguqukayo kuya endaweni yokungena kwamanzi (bheka uMdwebo 2). Uma kungenjalo, ama-bearings epompo yamanzi angase alimale kalula.
6. Ukuphakanyiswa kwepompo yamanzi angeke kube phansi kakhulu. Uma kungenjalo, i-valve yesango idinga ukufakwa epayipini lamanzi elisemthonjeni ukuze kulawulwe ukugeleza kwepompo endaweni elinganiselwe yokugeleza ukuze kuvinjwe injini ukuthi ingagcwali kakhulu futhi ishiswe ngenxa yamazinga amakhulu okugeleza.
7. Lapho ipompo yamanzi isebenza, ukuphuma kwamanzi kufanele kuqhubeke futhi ngisho, okwamanje kufanele kuzinzile (ngaphansi kwezimo zokusebenza ezilinganiselwe, ngokuvamile kungabi ngaphezu kuka-10% wamanje olinganiselwe), futhi akufanele kube nokudlidliza noma umsindo. Uma kukhona okungahambi kahle, umshini kufanele umiswe ukuze kutholwe imbangela futhi kuqedwe.
8. Lapho ufaka, naka ukumiswa kocingo lwe-motor grounding wire (bheka Umfanekiso 2). Uma ipayipi lamanzi liyipayipi lensimbi, lihole kusukela ku-wellhead clamp; lapho ipayipi lamanzi liyipayipi lepulasitiki, lihole ukusuka endaweni yokubeka phansi yepompo kagesi.

1. 1.After the submersible electric pump is installed, recheck the insulation resistance and three-phase continuity from the switch, and check whether there are any errors in the connection of the instruments and starting equipment. If there are no problems, you can start the test machine. After starting, observe whether the indication readings of each instrument are correct. If the rated voltage and current specified on the nameplate are exceeded, observe whether the water pump has any noise or vibration. If everything is normal, it can be put into operation.
   2. Four hours after the water pump is operated for the first time, the motor should be stopped and the thermal insulation resistance tested quickly. The value should be no less than 0.5 megohms.
   3．After the water pump is stopped, it should be restarted after an interval of five minutes to prevent the water column in the pipe from flowing back completely and causing the motor to burn out due to excessive current.
   4. After the water pump is put into normal operation, in order to extend its service life, it is necessary to regularly check whether the power supply voltage, operating current and insulation resistance are normal. If the following conditions are found, the machine should be shut down immediately to eliminate the fault.
2. 
   ①Under rated working conditions, the current exceeds 20%.
   ② The dynamic water level drops to the water inlet section, causing intermittent water discharge.
   ③The submersible pump vibrates violently or makes loud noise.
   ④The power supply voltage is lower than 340 volts.
   ⑤One phase of the fuse is burned out.
   ⑥The water pipe is damaged.
   ⑦The thermal insulation resistance of the motor to the ground is less than 0.5 megohms.
3. 
   5. Unit disassembly:
   ① Untie the cable tether, remove the pipeline part, and remove the wire protection plate.
   ② Unscrew the water drain bolt and drain all the water in the motor cavity.
   ③Remove the filter and loosen the fixing screw on the coupling that fixes the motor shaft.
   ④ Unscrew the bolts connecting the water inlet section and the motor, and separate the water pump from the motor (pay attention to leveling the unit when separating to prevent the pump shaft from bending)
   ⑤The water pump disassembly sequence is: (see Figure 1) water inlet section, impeller, diversion shell, impeller... check valve body. When disassembling the impeller, use a special tool to first loosen the tapered sleeve that fixes the impeller. Avoid disassembly during the disassembly process. Bend the pump shaft and damage various parts.
   ⑥The motor disassembly process is: (See Figure 1) Place the motor on the platform, and remove the nuts, bases, shaft head locking nuts, thrust plates, keys, and lower guides on the stud bolts (tie rod bolts) in sequence from the bottom of the motor. bearing seat, stud bolts, and then take out the rotor (be careful not to
   If the wire package is damaged), finally remove the connecting section and upper guide bearing seat.
   ⑦Unit assembly:
   Before assembly, all parts should be cleaned of rust and dirt, and all mating surfaces and fasteners should be coated with sealant, and then assembled in the reverse order of disassembly (the amount of movement of the motor shaft after assembly is about one millimeter). After completion, the coupling should be flexible, and then put the filter on to test the machine.
4. 
   6． Every time the submersible electric pump is operated for one year, or if it is operated for less than one year but has been submerged for two years, it should be disassembled and inspected in accordance with Article 5 to replace worn parts.

 1, khipha amanzi ku-motor cavity (ikakhulukazi ebusika ukuvimbela injini ukuba ingaqhwa), futhi ubophe ikhebula kahle.

 2, gcina endlini engaphakathi engenazo izinto ezonakalisayo namagesi, nezinga lokushisa elingaphansi kuka-40 °C.

 3, ukusetshenziswa isikhathi eside kufanele sinake ukuvimbela nokugqwala amaphampu submersible.

01 Ukuphuza amanzi omthombo ojulile

02 Ukuhlinzekwa kwamanzi asezingeni eliphezulu

03 amanzi asezintabeni 

04 amanzi ombhoshongo

05 Ukuchelela kwezolimo

06 ukuchelela engadini

07 amanzi omfula

08 amanzi asekhaya