QS Yakakosha Submersible Magetsi Pombi Yemvura Yakachena Uye Mvura Yegungwa Aquaculture

Well-designed sand-proof large flow water system, using water-immersed motor, no oil after burning machine does not pollute water. Suitable for freshwater aquaculture extraction of river water, sea water oxygen. Flow range 100-1000m3/h, lift 3-100m, power 3-100KW.

1, magetsi: matatu-chikamu AC 380V (kushivirira + / - 5%), 50HZ (kushivirira + / - 1%).

2, kunaka kwemvura:

(1) tembiricha yemvura haina kupfuura 20 °C;

(2) kusvibiswa kwakasimba kwemukati (huwandu hwehuwandu) haisi yakakura kudarika 0.01%;

(3) PH kukosha (pH) 6.5-8.5;

(4) hydrogen sulfide content haisi yakakura kudarika 1.5mg/L;

(5) chloride ion yemukati haina kupfuura 400mg/L.

3, mota yakavharwa kana yakazadzwa nemvura yakanyorova chimiro, usati washandisa iyo submersible mota mhango inofanira kunge izere nemvura yakachena, kudzivirira manyepo akazara, uye ipapo simbisa jekiseni remvura, mabhaudhi ekuburitsa mhepo, neimwe nzira isingabvumirwe kushandisa.

4, pombi inodzika inofanira kunge yakanyura mumvura, kudzika kwakadzika hakuna kudarika 70m, pasi pepombi inoputika kubva pasi petsime haisi pasi pe3m.

5, iyo tsime kuyerera kwemvura kunofanira kukwanisa kusangana neiyo submersible pombi mvura inobuda uye inoramba ichishanda, iyo submersible pombi mvura inobuda inofanira kudzorwa pa 0.7 - 1.2 nguva yekuyerwa kuyerera.

6, tsime rinofanira kunge rakatwasuka, pombi inonyudza haigone kushandiswa kana kuraswa, inongomira yakamira chete.

7, pombi inodzika inofanira kufananidzwa netambo zvinoenderana nezvinodiwa, uye mudziyo wekunze wekudzivirira wakawandisa. 8, pombi inorambidzwa zvachose pasina mvura isina-mutoro bvunzo muchina

 This well submersible pump is a clean water pump. It is strictly prohibited to excavate new wells, discharge sediments and muddy water. The voltage rating of the pump is 380/50 hertz, and other voltage ratings are not allowed. The submersible motor needs to be customized, and the underground cable must be waterproof cable, and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have common motor comprehensive protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection, etc. In order to prevent abnormal conditions, the protection device should be timely trip. During the installation and use process, the pump must be reliably grounded. It is strictly prohibited to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. An obvious "anti-electric shock" sign must be set up where the pump is used. Before going down the well or installing, the motor must fill the inner cavity with distilled water or non-corrosive clean cold water, and the inlet and outlet bolts must be tightened. When testing the pump, the pump cavity must be filled with water to lubricate the rubber bearings, and the instant start time shall not exceed one second to check whether the direction is correct. Pay attention to safety when lifting, and prevent the overturning of the pump from causing injury. Strictly according to the provisions of the pump lift and flow range, to prevent the pump in low lift when the large flow or in high lift when the large pull, resulting in serious wear and tear of thrust bearings and other parts, causing motor overload and burnout. After the pump into the well, the insulation resistance between the motor and the ground should not be less than 100MΩ, after the start of regular observation of voltage and current, and check whether the motor winding insulation meets the requirements; if the pump storage temperature below freezing, the water in the motor cavity should be discharged to prevent the cold temperature caused by the motor cavity water icing and damage the motor due to low temperature.

Kusuma kupfupi kwechimiro: chikamu chepombi chinonyanya kuumbwa nepombi shaft, impeller, diversion shell, rubber bearing, cheki valve body (optional parts) nezvimwe zvinhu. Chikamu chemota chinonyanya kuumbwa ne base, pressure inodzora firimu, thrust bear, thrust plate, chigaro chezasi chegwara, stator, rotor, chigaro chepamusoro chinotakura chigaro, mhete yejecha, chikamu chekupinza mvura, tambo nezvimwe zvinhu.

Izvo zvakakosha zvechigadzirwa zvinosanganisira:

 1, Motokari izere nemvura-yakanyorova inonyudza matatu-phase asynchronous mota, mota mhango izere nemvura yakachena, inoshandiswa kutonhodza mota nekuzora kutakura, kudzvanywa kunodzora firimu pazasi pemota kunoshandiswa kugadzirisa. kuwedzera uye kupesana kwekumanikidza musiyano wemvura mukati memuviri unokonzerwa nekushanduka kwekushisa kwekukwira kwemotokari.

 2, Kuti udzivise jecha riri mumvura yetsime kuti rirege kupinda mumotokari, iyo yekumusoro yepamusoro yemotokari shaft ine zvisimbiso zviviri zvemafuta, uye rin'i yejecha inoiswa kuti iite gadziriro yekudzivirira jecha.

 3, Kuti udzivise pombi yepombi kuti irege kumhanya paunotanga, pombi yepombi uye shaft yemotokari yakabatanidzwa nekubatanidza, uye kutakura kwepamusoro kunoiswa panzvimbo yepasi yemotokari.

 4, Kuzora kwemotor uye pombi inotakura ndiko kukwirisa mvura.

 5, Iyo mota stator inotenderera inogadzirwa nemhando yepamusoro inodzika mota inomonereka waya, ine yakakwirira insulation kuita.

 6, Pombi yakagadzirwa nekombuta CAD, ine chimiro chakareruka uye yakanaka tekinoroji kuita.

(1) Gadziriro isati yaiswa:
1. Tarisa kana pombi inodzika inosangana nemamiriro ekushandiswa uye chiyero chakatsanangurwa mubhuku rekushandisa.
2. Uchishandisa inorema obiect ine dhayamita yakaenzana nehupamhi hwekunze dhayamita yepombi inonyura, yera kana innediameter yemugodhi inogona kukwana pombi yepasi, uye kuyera kana kudzika kwetsime kunosangana nezvinodiwa zvekuisa.
3. Tarisa kuti chibhorani chakachena here uye kuti mvura yemutsime ine tsvina here. Usambofa washandisa pombi yemagetsi inonyura kugeza madhaka epombi yewelor nemvura yejecha kudzivirira kukuvara kusati kwasvika kwepombi yemagetsi inonyura.
4. Tarisa kana chinzvimbo cheiyo welhead yekumisikidza chisimbi chakakodzera uye kana ichikwanisa kumira nemhando yechikamu chose.
5. Tarisa kana zvikamu zvepombi zvinopinda mumvura zvakakwana uye zvakaiswa zvakanaka maererano nedhiyagiramu yegungano iri mubhukuBvisa sikirini yekusefa uye tenderedza coupling kuti uone kana ichitenderera zviri nyore.
6. Sunungura siruu yemvura wozadza monitivha nemvura yakachena, isingaore (noti. iva nechokwadi chekuinyora), wobva wasunga simbi yemvura. Mushure memaawa gumi nemaviri ejekiseni remvura, kudzivirira kwekudzivirira kwemota hakufanirwe kunge kuri pasi pe150M Q kana kuyerwa ne500V tafura yekuzunza.
7. Cable joint, cheka ruoko rwerabha rwe120mm kubva kune rumwe rutivi rwetambo inobuda uye tambo yekufananidza ine banga remuchina wemagetsi wobva wadzedzereka kureba kwewaya nhatu dzepakati muchimiro chakaita nhanho, bvisa simbi yemhangura ye20mm, kukwenya kweokisijeni. layer iri kunze kwewaya yemhangura nebanga kana jira rejecha, woisa tambo mbiri dzakabatanidzwa dzinogumira mupalirs.Mushure mekusunga danda zvakasimba newaya yakanaka yemhangura, tengesa zvakakwana uye zvakasimba, uye jecha rechero ipi zvayo. zviputi pamusoro. Zvadaro, pamajoini matatu, shandisa polyvester insulation tepi kuaputira nenzira yakaturikidzana yemadhishi matatu. Putira migumo miviri yekupeta layer yakasimba neshinda yenyion, wobva washandisa semi stacked nzira yekuputira tepi kwematanho matatu. Putira iyo yekubuda kunze nepamusoro-kumanikidza insulation tepi yezvikamu zvitatu. Pakupedzisira, peta tambo nhatu pamwe chete uye udzokorore kuaputira kune mashanu mavhavha ane high-pressure tape. Nheyo yega yega inofanirwa kusungirirwa zvakasimba, uye majoini emukati anofanirwa kunge akasimba uye akasimba kudzivirira mvura kuti isapinda uye ichikuvadza kuvharisa, Mushure mekuputira, nyura mumvura pamhepo tembiricha ye20 'c kwemaawa gumi nemaviri, uye kuyera kudzivirira kwekudzivirira netafura inodedera. , iyo haifanire kunge iri pasi pe100M Ω

Iyo yakasungirirwa cable wiring process diagraph yakaita seiyi:

8. Shandisa multimeter kuti utarise kana mawaya matatu-chikamu akabatana uye kana iyo DC inopikisa inenge yakaenzana.
9. Tarisa kana dunhu neshanduko simba rakawandisa, uye wozobatanidza iyo overload kudzivirira switch kana kutanga michina. Ona Tafura 2 yemhando dzakanangana, wozoDurura mugomo wemvura mupombi yemvura kubva papombi yemvura kuti uise mabearings erabha mupombi, wobva waisa pombi yemagetsi inonyura yakamira uye yakatsiga. Tanga (pasingapfuuri sekondi imwe) uye tarisa kana gwara rekutungamirira richienderana nechiratidzo chekutungamirira. Kana zvisina kudaro, chinjanisa chero zvibatanidza zviviri zvetatu-phase cable. Wobva waisa sefa uye gadzirira kudzika pasi mutsime. Kana yakashandiswa muzviitiko zvakakosha (zvakadai semigero, migero, nzizi, madziva, madziva, nezvimwewo), pombi yemagetsi inofanira kunge yakavimbika pasi.

(2) Midziyo yekuisa uye zvishandiso:
1. Imwe peya yekusimudza maketani anopfuura matani maviri.
2. Chitatu chine hurefu hwakamira husingasviki mamita mana.
3. Tambo mbiri dzakarembera (tambo dzetambo) dzinogona kutakura huremu hunodarika tani imwe (dzinogona kutakura huremu hweseti yakakwana yemapombi emvura).
4. Isai mapeya maviri emagetsi (splints).
5. Wrenches, sando, screwdrivers, midziyo yemagetsi uye zviridzwa, nezvimwewo.

(3) Kuiswa kwepombi yemagetsi:
1. Dhidhiyo yekuisa yepombi yemagetsi inoputika inoratidzwa muMufananidzo 2. Izvo zviyero zvekuisa zvakananga zvinoratidzwa muTebhu 3 "Rondedzero yeKuisa Dimensions ye Submersible Electric Pump".

2. Pombi dzemagetsi dzinonyura dzine musoro usingasviki mamita makumi matatu dzinogona kusimudzwa zvakananga mugomba uchishandisa hose netambo dzewaya kana dzimwe tambo dzehemp dzinogona kutakura huremu hwakazara hwemuchina wese, pombi dzemvura, uye mvura mumapombi.

3. Mapombi ane musoro weanopfuura mamita makumi matatu anoshandisa pombi dzesimbi, uye kutevedzana kwekugadzika kunotevera:
①Shandisa chibatiso kusungirira kumucheto kwekumusoro kwepombi yemvura (motor nepombi yemvura zvabatanidzwa panguva ino), isimudze neketani inorembera, woisungirira zvishoma nezvishoma mugomba kusvikira Isa chirambi patsime wobvisa. hanging chain.
② Shandisa imwe peya yezvisungo kusungirira pombi, woisimudza necheni yakaturika masendimita gumi nemashanu kubva paflange, woidzikisa zvishoma nezvishoma. Pakati pepombi flange nepombi flangeIsa pedhi rerabha panzvimbo uye simbisa pombi uye pomba zvakaenzana nemabhaudhi, nzungu uye mawachi echirimo.
③ Simudza pombi inonyura zvishoma, bvisa chinosungirira chiri kumucheto kwepombi yemvura, sunga tambo zvakasimba papombi yemvura netepi yepurasitiki, woisunga zvishoma nezvishoma kusvikira Chisungiso chaiswa patsime.
④Shandisa nzira imwechete kusungira pombi dzose dzemvura mutsime.
⑤Mushure metambo yekutungamirira-kunze yakabatanidzwa kune chinja chekutonga, chakabatanidzwa kune matatu-phase simba rekupa.

(4) Zvinhu zvekucherechedza panguva yekuisa:
1. Kana chiitiko chejamming chinowanikwa panguva yekupomba, shandura kana kudhonza pombi yemvura kuti ukunde nzvimbo yekumisa. Kana matanho akasiyana-siyana achiri kusashanda, ndapota Usamanikidza pombi pasi kuti udzivise kukuvadzwa kwepombi yemagetsi inonyudza uye tsime.
2. Panguva yekuisa, rubber pad inofanira kuiswa paflange yepombi imwe neimwe uye yakasimbiswa zvakafanana.
3. Kana pombi yemvura yadzikiswa mugomba, inofanira kuiswa pakati pepombi yetsime kudzivirira kuti pombi isamhanye nemudhuri wetsime kwenguva yakareba, zvichiita kuti pombi izununguke uye injini kutsvaira nekutsva. .
4. Sarudza kudzika kwepombi yemvura kusvika pasi petsime maererano nejecha rinoyerera uye silt mamiriro emutsime. Usavige pombi mumatope. Nhambwe kubva papombi yemvura kusvika pasi petsime kazhinji haisviki mamita matatu (ona Mufananidzo 2).
5. Kudzika kwemvura yepombi yemvura hakufanirwe kunge kuri pasi pe1-1.5 metres kubva padanho remvura rine simba kusvika painopinza mvura (ona Mufananidzo 2). Zvikasadaro, pombi yemvura inotakura inogona kukuvara nyore.
6. Kusimudzwa kwepombi yemvura hakugoni kuderera zvakanyanya. Zvikasadaro, vharuvhu yegedhi inoda kuiswa papombi yemvura yemugodhi kudzora kuyerera kwepombi panzvimbo yakayerwa yekuyerera kudzivirira mota kuti isaremerwe nekupiswa nekuda kwekuyerera kukuru.
7. Apo pombi yemvura iri kushanda, kubuda kwemvura kunofanira kuenderera mberi uye kunyange, ikozvino inofanira kunge yakagadzikana (pasi pemamiriro ekushanda akarongwa, kazhinji haapfuuri 10% yehuwandu hwemazuva ano), uye hapafaniri kuva nekudengenyeka kana ruzha. Kana paine abnormality, muchina uyu unofanirwa kumiswa kuti uzive chikonzero uye kubvisa.
8. Paunenge uchiisa, teerera kugadzika kwemoto wepasi waya (ona Mufananidzo 2). Kana pombi yemvura iri pombi yesimbi, itungamire kubva patsime remusoro; apo pombi yemvura iri pombi yepurasitiki, itungamirire kubva painogadzika chiratidzo chepombi yemagetsi.

1. 1.After the submersible electric pump is installed, recheck the insulation resistance and three-phase continuity from the switch, and check whether there are any errors in the connection of the instruments and starting equipment. If there are no problems, you can start the test machine. After starting, observe whether the indication readings of each instrument are correct. If the rated voltage and current specified on the nameplate are exceeded, observe whether the water pump has any noise or vibration. If everything is normal, it can be put into operation.
   2. Four hours after the water pump is operated for the first time, the motor should be stopped and the thermal insulation resistance tested quickly. The value should be no less than 0.5 megohms.
   3．After the water pump is stopped, it should be restarted after an interval of five minutes to prevent the water column in the pipe from flowing back completely and causing the motor to burn out due to excessive current.
   4. After the water pump is put into normal operation, in order to extend its service life, it is necessary to regularly check whether the power supply voltage, operating current and insulation resistance are normal. If the following conditions are found, the machine should be shut down immediately to eliminate the fault.
2. 
   ①Under rated working conditions, the current exceeds 20%.
   ② The dynamic water level drops to the water inlet section, causing intermittent water discharge.
   ③The submersible pump vibrates violently or makes loud noise.
   ④The power supply voltage is lower than 340 volts.
   ⑤One phase of the fuse is burned out.
   ⑥The water pipe is damaged.
   ⑦The thermal insulation resistance of the motor to the ground is less than 0.5 megohms.
3. 
   5. Unit disassembly:
   ① Untie the cable tether, remove the pipeline part, and remove the wire protection plate.
   ② Unscrew the water drain bolt and drain all the water in the motor cavity.
   ③Remove the filter and loosen the fixing screw on the coupling that fixes the motor shaft.
   ④ Unscrew the bolts connecting the water inlet section and the motor, and separate the water pump from the motor (pay attention to leveling the unit when separating to prevent the pump shaft from bending)
   ⑤The water pump disassembly sequence is: (see Figure 1) water inlet section, impeller, diversion shell, impeller... check valve body. When disassembling the impeller, use a special tool to first loosen the tapered sleeve that fixes the impeller. Avoid disassembly during the disassembly process. Bend the pump shaft and damage various parts.
   ⑥The motor disassembly process is: (See Figure 1) Place the motor on the platform, and remove the nuts, bases, shaft head locking nuts, thrust plates, keys, and lower guides on the stud bolts (tie rod bolts) in sequence from the bottom of the motor. bearing seat, stud bolts, and then take out the rotor (be careful not to
   If the wire package is damaged), finally remove the connecting section and upper guide bearing seat.
   ⑦Unit assembly:
   Before assembly, all parts should be cleaned of rust and dirt, and all mating surfaces and fasteners should be coated with sealant, and then assembled in the reverse order of disassembly (the amount of movement of the motor shaft after assembly is about one millimeter). After completion, the coupling should be flexible, and then put the filter on to test the machine.
4. 
   6． Every time the submersible electric pump is operated for one year, or if it is operated for less than one year but has been submerged for two years, it should be disassembled and inspected in accordance with Article 5 to replace worn parts.

 1, bvisa mvura mumugodhi wemota (kunyanya munguva yechando kudzivirira mota kubva kuchando), uye sunga tambo zvakanaka.

 2, chengetera muimba yemukati isina zvinhu zvinoora uye magasi, ine tembiricha iri pasi pe40 °C.

 3, kushandiswa kwenguva refu kunofanira kutarisisa kudzivirira ngura kwemapombi anodzika.

01 Kunwa mvura mutsime rakadzika

02 Mvura yakakwirira-inokwira

03 mvura yemugomo 

04 shongwe yemvura

05 Kudiridzira kwekurima

06 kudiridza mubindu

07 kunwa mvura yerwizi

08 mvura yemumba