QS Tshwj Xeeb Submersible Hluav Taws Xob Hluav Taws Xob Rau Dej Dej thiab Dej Hiav Txwv Aquaculture

Well-designed sand-proof large flow water system, using water-immersed motor, no oil after burning machine does not pollute water. Suitable for freshwater aquaculture extraction of river water, sea water oxygen. Flow range 100-1000m3/h, lift 3-100m, power 3-100KW.

1, fais fab mov: peb-theem AC 380V ( kam rau ua + / - 5%), 50HZ ( kam rau ua + / - 1%).

2, dej zoo:

(1) dej kub tsis siab tshaj 20 ° C;

(2) cov khoom impurities cov ntsiab lus (qhov loj piv) tsis ntau tshaj 0.01%;

(3) PH tus nqi (pH) 6.5-8.5;

(4) cov ntsiab lus hydrogen sulfide tsis ntau dua 1.5mg / L;

(5) chloride ion cov ntsiab lus tsis ntau dua 400mg / L.

3, lub cev muaj zog raug kaw los yog dej puv ntub cov qauv, ua ntej siv lub submersible lub cev muaj zog kab noj hniav yuav tsum muaj cov dej huv huv, kom tsis txhob muaj qhov tsis muaj tseeb, thiab tom qab ntawd nruj cov dej txhaj tshuaj, cua tso tawm bolts, txwv tsis pub siv.

4, lub twj tso kua mis submersible yuav tsum tau muab tso rau hauv dej, qhov tob tob tsis tshaj 70m, lub twj tso kua mis submersible hauv qab ntawm lub qhov dej tsis yog tsawg dua 3m.

5, cov dej ntws zoo yuav tsum muaj peev xwm ua tau raws li cov twj tso kua dej submersible tso tawm thiab kev ua haujlwm tas mus li, lub twj tso kua mis tso dej tawm yuav tsum tau tswj ntawm 0.7 - 1.2 npaug ntawm qhov ntsuas ntws.

6, lub qhov dej yuav tsum ncaj, lub twj tso kua mis submersible tsis tuaj yeem siv lossis pov tseg, tsuas yog siv ntsug.

7, lub twj tso kua mis submersible yuav tsum tau sib phim nrog lub cable raws li qhov yuav tsum tau ua, thiab cov khoom siv tiv thaiv sab nraud. 8, lub twj tso kua mis yog nruj me ntsis txwv tsis pub dej tsis muaj-load tshuab kuaj

 This well submersible pump is a clean water pump. It is strictly prohibited to excavate new wells, discharge sediments and muddy water. The voltage rating of the pump is 380/50 hertz, and other voltage ratings are not allowed. The submersible motor needs to be customized, and the underground cable must be waterproof cable, and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have common motor comprehensive protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection, etc. In order to prevent abnormal conditions, the protection device should be timely trip. During the installation and use process, the pump must be reliably grounded. It is strictly prohibited to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. An obvious "anti-electric shock" sign must be set up where the pump is used. Before going down the well or installing, the motor must fill the inner cavity with distilled water or non-corrosive clean cold water, and the inlet and outlet bolts must be tightened. When testing the pump, the pump cavity must be filled with water to lubricate the rubber bearings, and the instant start time shall not exceed one second to check whether the direction is correct. Pay attention to safety when lifting, and prevent the overturning of the pump from causing injury. Strictly according to the provisions of the pump lift and flow range, to prevent the pump in low lift when the large flow or in high lift when the large pull, resulting in serious wear and tear of thrust bearings and other parts, causing motor overload and burnout. After the pump into the well, the insulation resistance between the motor and the ground should not be less than 100MΩ, after the start of regular observation of voltage and current, and check whether the motor winding insulation meets the requirements; if the pump storage temperature below freezing, the water in the motor cavity should be discharged to prevent the cold temperature caused by the motor cavity water icing and damage the motor due to low temperature.

Kev taw qhia luv luv ntawm cov qauv: lub twj tso kua mis feem ntau yog tsim los ntawm lub twj tso kua mis, lub impeller, lub plhaub hloov pauv, cov kabmob roj hmab, kos lub cev lub cev (qhov chaw xaiv) thiab lwm yam khoom. Lub cev muaj zog feem ntau yog tsim los ntawm lub hauv paus, lub siab tswj cov yeeb yaj kiab, cov kabmob thrust, thrust phaj, qis qhia bearing lub rooj, stator, rotor, sab sauv qhia bearing lub rooj, xuab zeb nplhaib, dej inlet seem, cable thiab lwm yam khoom.

Cov yam ntxwv tseem ceeb ntawm cov khoom muaj xws li:

 1, Lub cev muaj zog yog cov dej ntub dej submersible peb-theem asynchronous lub cev muaj zog, lub cev muaj zog muaj dej huv, siv los ua kom txias lub cev muaj zog thiab lubricate cov kabmob, lub siab tswj cov yeeb yaj kiab hauv qab ntawm lub cev yog siv los kho. qhov expansion thiab contraction siab sib txawv ntawm cov dej nyob rau hauv lub cev tshwm sim los ntawm kev hloov ntawm qhov kub thiab txias ntawm lub cev muaj zog.

 2, Txhawm rau tiv thaiv cov xuab zeb hauv cov dej hauv dej los ntawm kev nkag mus rau lub cev muaj zog, sab sauv kawg ntawm lub cev muaj zog yog nruab nrog ob lub roj foob, thiab lub nplhaib xuab zeb tau teeb tsa los tsim cov qauv kev tiv thaiv xuab zeb.

 3, txhawm rau tiv thaiv lub twj tso kua mis los ntawm kev khiav thaum pib, lub twj tso kua mis ncej thiab lub cev muaj zog yog txuas nrog lub coupling, thiab lub zog thrust bearing yog ntsia rau hauv qab ntawm lub cev muaj zog.

 4, Lub lubrication ntawm lub cev muaj zog thiab lub twj tso kua mis yog cov dej lubrication.

 5, Lub cev muaj zog stator winding yog ua los ntawm cov khoom siv zoo submersible motor winding hlau, nrog kev ua haujlwm siab rwb thaiv tsev.

 6, Lub twj tso kua mis tsim los ntawm lub computer CAD, nrog cov qauv yooj yim thiab kev ua haujlwm zoo.

(1) Kev npaj ua ntej installation:
1. Xyuas seb lub twj tso kua mis submersible puas ua tau raws li qhov kev siv thiab qhov tshwj xeeb hauv phau ntawv qhia.
2. Siv lub qhov hnyav obiect nrog txoj kab uas hla sib npaug rau qhov siab tshaj plaws sab nraud ntawm lub twj tso kua mis submersible, ntsuas seb qhov inneldiameter ntawm lub qhov dej puas tuaj yeem haum rau lub twj tso kua mis submersible, thiab ntsuas seb qhov dej tob puas ua tau raws li qhov yuav tsum tau ua.
3. Xyuas seb lub qhov dej puas huv si thiab seb cov dej hauv qhov dej puas yog turbid. Tsis txhob siv lub tshuab hluav taws xob submersible los ntxuav lub welor twj av nkos thiab dej xuab zeb kom tsis txhob muaj kev puas tsuaj ntxov rau lub tshuab hluav taws xob submersible.
4. Tshawb xyuas seb txoj haujlwm ntawm lub welhead installation clamp puas haum thiab seb nws puas tuaj yeem tiv taus qhov zoo ntawm tag nrho chav tsev.
5. Tshawb xyuas seb cov twj tso kua dej submersible puas ua tiav thiab teeb tsa kom raug raws li daim duab sib dhos hauv phau ntawv tshem tawm cov ntxaij lim dej thiab tig lub coupling kom pom tias nws tig tau yooj yim.
6. Unscrew cov dej ntsia hlau thiab sau cov kab noj hniav nrog cov dej huv, tsis muaj corrosive (ceeb toom. Nco ntsoov sau nws), tom qab ntawd ceev cov dej screws. Tom qab 12 teev ntawm kev txhaj tshuaj dej, qhov rwb thaiv tsev ntawm lub cev muaj zog yuav tsum tsis txhob tsawg dua 150M Q thaum ntsuas nrog 500V co lub rooj.
7. Cable sib koom tes, txiav tawm lub tes tsho roj hmab 120mm los ntawm ib kawg ntawm cov khoom siv tawm thiab cov khoom sib txuam nrog ib tus neeg siv hluav taws xob riam, stagger qhov ntev ntawm peb cov xov hlau nyob hauv ib kauj ruam, tev tawm 20mm tooj liab tub ntxhais, txhuam cov oxide. txheej nyob rau sab nraud ntawm cov hlau tooj liab nrog ib rab riam los yog cov ntaub xuab zeb, thiab ntxig rau ob txoj hlua txuas rau hauv palir. burrs ntawm qhov chaw. Tom qab ntawd, rau peb lub pob qij txha, siv polyvester rwb thaiv tsev daim kab xev los qhwv lawv nyob rau hauv ib tug semi stacked yam rau peb lavers. Qhwv ob qhov kawg ntawm txheej txheej nruj nreem nrog nyion xov, thiab tom qab ntawd siv cov txheej txheem semi stacked los qhwv daim kab xev rau peb txheej. qhwv lub outellaer nrog high-pressure rwb thaiv tsev daim kab xev rau peb txheej. Thaum kawg, quav peb txoj hlua ua ke thiab rov qhwv lawv rau tsib txheej nrog daim kab xev siab. Txhua txheej yuav tsum tau nruj nreem khi, thiab cov interlayer pob qij txha yuav tsum nruj thiab fimm kom tsis txhob muaj dej los ntawm kev nkag mus thiab ua puas lub rwb thaiv tsev, Tom qab qhwv, tsau nyob rau hauv dej ntawm chav tsev kub ntawm 20 'c rau 12 teev, thiab ntsuas lub rwb thaiv tsev tiv thaiv nrog ib tug co lub rooj. , uas yuav tsum tsis pub tsawg tshaj 100M Ω

Daim duab txuas cable thaiv txheej txheem yog raws li hauv qab no:

8. Siv multimeter los xyuas seb cov xov hlau peb-theem puas txuas thiab seb qhov DC tsis kam yog kwv yees li qhov sib npaug.
9. Xyuas seb puas muaj peev xwm ntawm lub Circuit Court thiab transformer yog overloaded, thiab ces txuas lub overload tiv thaiv hloov los yog pib cov khoom. Saib Table 2 rau cov qauv tshwj xeeb, thiab tom qab ntawd hliv ib lub thoob dej rau hauv lub twj tso kua mis los ntawm lub qhov dej twj tso kua mis kom lubricate cov roj hmab bearings hauv lub twj tso kua mis, thiab tom qab ntawd muab lub twj tso kua mis submersible fais fab tso ncaj thiab khov kho.Start (tsis pub ntau tshaj ib ob) thiab xyuas seb qhov kev taw qhia lub kauj tsheb puas zoo ib yam nrog lub kauj tsheb. Yog tias tsis yog, sib pauv ob qhov txuas ntawm peb-theem cable.Tom qab ntawd nruab lub lim thiab npaj mus rau hauv qhov dej. Yog tias siv rau lub sijhawm tshwj xeeb (xws li kwj dej, kwj dej, dej ntws, pas dej, pas dej, thiab lwm yam), lub twj tso kua mis hluav taws xob yuav tsum muaj kev ntseeg siab.

(2) Kev teeb tsa thiab cov cuab yeej siv:
1. Ib khub nqa cov hlua rau ntau tshaj ob tons.
2. Lub tripod nrog ib txoj kab ntsug qhov siab tsis pub tsawg tshaj plaub meters.
3. Ob txoj hlua dai (xov hlau hlua) uas tuaj yeem nqa tau qhov hnyav ntawm ntau tshaj ib tuj (tuaj yeem lav qhov hnyav ntawm cov twj tso kua dej tiav).
4. Nruab ob khub ntawm clamps (splnts).
5. Wrenches, hammers, ntswj ntsia hlau, cov cuab yeej hluav taws xob thiab cov twj paj nruag, thiab lwm yam.

(3) Hluav taws xob twj tso kua mis installation:
1. Daim duab qhia kev teeb tsa ntawm lub tshuab hluav taws xob submersible yog pom nyob rau hauv daim duab 2. Qhov tshwj xeeb installation qhov ntev yog qhia nyob rau hauv Table 3 "Daim Ntawv Teev Tseg Qhov Loj ntawm Submersible Electric Pump".

2. Cov twj siv hluav taws xob submersible nrog lub taub hau tsawg dua 30 meters tuaj yeem nqa ncaj qha mus rau hauv lub qhov dej siv cov hoses thiab cov hlua hlau lossis lwm cov hlua hemp uas tuaj yeem nqa tau qhov hnyav tag nrho ntawm lub tshuab, cov kav dej, thiab dej hauv cov kav dej.

3. Cov twj tso kua mis nrog lub taub hau ntau dua 30 meters siv cov kav dej steel, thiab cov txheej txheem kev teeb tsa yog raws li hauv qab no:
①Siv lub clamp los tuav lub siab kawg ntawm lub twj tso kua mis (lub cev muaj zog thiab lub twj tso kua dej tau txuas rau lub sijhawm no), nqa nws nrog cov hlua khi, thiab maj mam khi nws mus rau hauv lub qhov dej kom txog thaum muab lub clamp rau ntawm lub qhov dej thiab tshem tawm qhov saw caj dab.
② Siv lwm ob lub clamps los tuav cov yeeb nkab, nqa nrog ib txoj hlua dai 15 cm deb ntawm lub flange, thiab maj mam txo qis. Nruab nrab ntawm cov yeeb nkab flange thiab lub twj tso kua mis flange Muab cov roj hmab tso rau hauv qhov chaw thiab nruj cov yeeb nkab thiab twj tso kua mis sib npaug nrog bolts, ceev thiab lub caij nplooj ntoos hlav ntxhua.
③ Nqa lub twj tso kua mis submersible me ntsis, tshem lub clamp ntawm lub taub dej kawg ntawm lub twj tso kua mis, khi lub cable kom ruaj khov rau hauv cov kav dej nrog ib daim kab xev yas, thiab maj mam khi nws kom txog thaum lub clamp muab tso rau ntawm lub qhov dej.
④ Siv tib txoj kev los khi tag nrho cov kav dej rau hauv qhov dej.
⑤ Tom qab cov hlau lead-tawm txuas nrog rau kev tswj kev hloov, nws txuas nrog peb-theem fais fab mov.

(4) Tej yam yuav tsum nco ntsoov thaum lub installation:
1. Yog tias pom muaj qhov tshwm sim jamming thaum lub sij hawm siv cov txheej txheem, tig los yog rub cov yeeb nkab dej kom kov yeej qhov jamming point. Yog tias ntau yam kev ntsuas tseem tsis ua haujlwm, thov tsis txhob yuam lub twj tso kua mis kom tsis txhob muaj kev puas tsuaj rau lub tshuab hluav taws xob submersible thiab lub qhov dej.
2. Thaum lub sij hawm installation, yuav tsum tau muab tso rau ntawm ib tug roj hmab ncoo nyob rau hauv lub flange ntawm txhua lub yeeb nkab thiab nruj nreem sib npaug zos rau.
3. Thaum lub twj tso kua dej qis rau hauv lub qhov dej, nws yuav tsum tau muab tso rau hauv nruab nrab ntawm lub qhov dej kom tsis txhob lub twj tso kua mis khiav tawm ntawm lub qhov dej mus ntev, ua rau lub twj tso kua mis vibrate thiab lub cev muaj zog cheb thiab hlawv. .
4. Txiav txim siab qhov tob ntawm lub twj tso kua mis dej mus rau hauv qab ntawm lub qhov dej raws li cov xuab zeb ntws thiab cov av ntawm lub qhov dej. Tsis txhob faus lub twj tso kua mis hauv av nkos. Qhov kev ncua deb ntawm lub twj tso kua dej mus rau hauv qab ntawm lub qhov dej yog feem ntau tsis pub tsawg tshaj 3 meters (saib daim duab 2).
5. Qhov dej nkag qhov tob ntawm lub twj tso kua mis dej yuav tsum tsis pub tsawg tshaj 1-1.5 meters los ntawm cov dej dynamic mus rau qhov dej nkag ntawm qhov dej (saib daim duab 2). Txwv tsis pub, cov dej twj tso kua mis bearings yuav yooj yim puas.
6. Lub nqa ntawm lub twj tso kua dej tsis tuaj yeem qis dhau. Txwv tsis pub, lub rooj vag valve yuav tsum tau muab tso rau ntawm lub qhov dej hauv qhov dej los tswj lub twj tso kua mis ntawm qhov ntsuas qhov taw tes kom tsis txhob muaj lub cev muaj zog los ntawm overloaded thiab hlawv tawm vim qhov txaus txaus.
7. Thaum lub twj tso kua dej ua haujlwm, cov dej tso tawm yuav tsum tsis tu ncua thiab txawm tias, qhov tam sim no yuav tsum ruaj khov (raws li kev ntsuas kev ua haujlwm, feem ntau tsis pub tshaj 10% ntawm cov ntsuas tam sim no), thiab yuav tsum tsis muaj kev vibration lossis suab nrov. Yog tias muaj qhov txawv txav, lub tshuab yuav tsum tau nres kom paub qhov ua rau thiab tshem tawm nws.
8. Thaum txhim kho, xyuam xim rau qhov chaw ntawm lub cev muaj zog grounding hlau (saib daim duab 2). Thaum cov yeeb nkab dej yog cov yeeb nkab steel, coj nws los ntawm lub qhov dej zoo clamp; thaum cov yeeb nkab dej yog cov yeeb nkab yas, coj nws los ntawm cov cim hauv av ntawm lub tshuab hluav taws xob.

1. 1.After the submersible electric pump is installed, recheck the insulation resistance and three-phase continuity from the switch, and check whether there are any errors in the connection of the instruments and starting equipment. If there are no problems, you can start the test machine. After starting, observe whether the indication readings of each instrument are correct. If the rated voltage and current specified on the nameplate are exceeded, observe whether the water pump has any noise or vibration. If everything is normal, it can be put into operation.
   2. Four hours after the water pump is operated for the first time, the motor should be stopped and the thermal insulation resistance tested quickly. The value should be no less than 0.5 megohms.
   3．After the water pump is stopped, it should be restarted after an interval of five minutes to prevent the water column in the pipe from flowing back completely and causing the motor to burn out due to excessive current.
   4. After the water pump is put into normal operation, in order to extend its service life, it is necessary to regularly check whether the power supply voltage, operating current and insulation resistance are normal. If the following conditions are found, the machine should be shut down immediately to eliminate the fault.
2. 
   ①Under rated working conditions, the current exceeds 20%.
   ② The dynamic water level drops to the water inlet section, causing intermittent water discharge.
   ③The submersible pump vibrates violently or makes loud noise.
   ④The power supply voltage is lower than 340 volts.
   ⑤One phase of the fuse is burned out.
   ⑥The water pipe is damaged.
   ⑦The thermal insulation resistance of the motor to the ground is less than 0.5 megohms.
3. 
   5. Unit disassembly:
   ① Untie the cable tether, remove the pipeline part, and remove the wire protection plate.
   ② Unscrew the water drain bolt and drain all the water in the motor cavity.
   ③Remove the filter and loosen the fixing screw on the coupling that fixes the motor shaft.
   ④ Unscrew the bolts connecting the water inlet section and the motor, and separate the water pump from the motor (pay attention to leveling the unit when separating to prevent the pump shaft from bending)
   ⑤The water pump disassembly sequence is: (see Figure 1) water inlet section, impeller, diversion shell, impeller... check valve body. When disassembling the impeller, use a special tool to first loosen the tapered sleeve that fixes the impeller. Avoid disassembly during the disassembly process. Bend the pump shaft and damage various parts.
   ⑥The motor disassembly process is: (See Figure 1) Place the motor on the platform, and remove the nuts, bases, shaft head locking nuts, thrust plates, keys, and lower guides on the stud bolts (tie rod bolts) in sequence from the bottom of the motor. bearing seat, stud bolts, and then take out the rotor (be careful not to
   If the wire package is damaged), finally remove the connecting section and upper guide bearing seat.
   ⑦Unit assembly:
   Before assembly, all parts should be cleaned of rust and dirt, and all mating surfaces and fasteners should be coated with sealant, and then assembled in the reverse order of disassembly (the amount of movement of the motor shaft after assembly is about one millimeter). After completion, the coupling should be flexible, and then put the filter on to test the machine.
4. 
   6． Every time the submersible electric pump is operated for one year, or if it is operated for less than one year but has been submerged for two years, it should be disassembled and inspected in accordance with Article 5 to replace worn parts.

 1, muab cov dej tso rau hauv lub cav cav (tshwj xeeb tshaj yog nyob rau lub caij ntuj no los tiv thaiv lub cev tsis muaj zog), thiab khi lub cable zoo.

 2, cia nyob rau hauv ib chav tsev tsis muaj corrosive tshuaj thiab gases, nrog ib tug kub ntawm 40 ° C.

 3, kev siv mus sij hawm ntev yuav tsum tau them sai sai rau kev tiv thaiv xeb ntawm cov twj submersible.

01 Lub qhov dej tob tob

02 High-rise water supply

03 roob dej 

04 dej

05 Agricultural irrigation

06 vaj irrigation

07 dej haus

08 dej hauv tsev