IMpompo yoMbane eKhethekileyo ye-QS eSumersible yaManzi acocekileyo kunye naManzi oLwandle lwaseLwandle

Well-designed sand-proof large flow water system, using water-immersed motor, no oil after burning machine does not pollute water. Suitable for freshwater aquaculture extraction of river water, sea water oxygen. Flow range 100-1000m3/h, lift 3-100m, power 3-100KW.

I-1, ukunikezelwa kwamandla: isigaba sesithathu se-AC 380V (ukunyamezela + / - 5%), 50HZ (ukunyamezela + / - 1%).

2, umgangatho wamanzi:

(1) iqondo lobushushu lamanzi alikho ngaphezulu kwe-20 °C;

(2) isiqulatho sobumdaka obuqinileyo (umlinganiselo wobunzima) awukho ngaphezu kwe-0.01%;

(3) ixabiso le-PH (pH) 6.5-8.5;

(4) umxholo we-hydrogen sulfide awukho mkhulu kune-1.5mg / L;

(5) umxholo we-chloride ion awukho mkhulu kune-400mg/L.

I-3, i-motor ivaliwe okanye izaliswe ngamanzi isakhiwo esimanzi, ngaphambi kokusetyenziswa i-submersible motor cavity kufuneka igcwele amanzi acocekileyo, ukuthintela ubuxoki obugcweleyo, kwaye emva koko uqinise inaliti yamanzi, iibholiti zokukhululwa komoya, kungenjalo akuvumelekanga ukusebenzisa.

I-4, impompo ephantsi kwamanzi kufuneka ifakwe ngokupheleleyo emanzini, ubunzulu bokuntywila abukho ngaphezu kwe-70m, i-bottom yepompo ephantsi kwamanzi ukusuka ezantsi kwequla ayikho ngaphantsi kwe-3m.

I-5, ukuhamba kwamanzi omthombo kufuneka kukwazi ukuhlangabezana nemveliso yamanzi epompo ephantsi kwamanzi kunye nokusebenza okuqhubekayo, i-submersible pump water output kufuneka ilawulwe kwi-0.7 - 1.2 amaxesha okuhamba okulinganiselwe.

I-6, iqula kufuneka lithe tye, impompo engaphantsi kwamanzi ayinakusetyenziswa okanye ilahlwe, ukusetyenziswa ngokuthe nkqo kuphela.

I-7, ipompo ye-submersible kufuneka ihambelane nekhebula ngokweemfuno, kunye nesixhobo sokukhusela ukugqithiswa kwangaphandle. I-8, impompo inqatshelwe ngokungqongqo ngaphandle komatshini wokuvavanya amanzi akukho mthwalo

 This well submersible pump is a clean water pump. It is strictly prohibited to excavate new wells, discharge sediments and muddy water. The voltage rating of the pump is 380/50 hertz, and other voltage ratings are not allowed. The submersible motor needs to be customized, and the underground cable must be waterproof cable, and must be equipped with starting equipment, such as distribution box, etc. The starting equipment should have common motor comprehensive protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection, etc. In order to prevent abnormal conditions, the protection device should be timely trip. During the installation and use process, the pump must be reliably grounded. It is strictly prohibited to push and pull the switch when hands and feet are wet. The power supply must be cut off before installation and maintenance of the pump. An obvious "anti-electric shock" sign must be set up where the pump is used. Before going down the well or installing, the motor must fill the inner cavity with distilled water or non-corrosive clean cold water, and the inlet and outlet bolts must be tightened. When testing the pump, the pump cavity must be filled with water to lubricate the rubber bearings, and the instant start time shall not exceed one second to check whether the direction is correct. Pay attention to safety when lifting, and prevent the overturning of the pump from causing injury. Strictly according to the provisions of the pump lift and flow range, to prevent the pump in low lift when the large flow or in high lift when the large pull, resulting in serious wear and tear of thrust bearings and other parts, causing motor overload and burnout. After the pump into the well, the insulation resistance between the motor and the ground should not be less than 100MΩ, after the start of regular observation of voltage and current, and check whether the motor winding insulation meets the requirements; if the pump storage temperature below freezing, the water in the motor cavity should be discharged to prevent the cold temperature caused by the motor cavity water icing and damage the motor due to low temperature.

Intshayelelo emfutshane yolwakhiwo: inxalenye yempompo yenziwe ikakhulu yimpompo yempompo, i-impeller, igobolondo le-diversion, ukuthwala irabha, i-valve yokukhangela umzimba (amalungu okuzikhethela) kunye nezinye izinto. Inxalenye yemoto iqulunqwe ikakhulu sisiseko, ifilimu elawula uxinzelelo, i-thrust bearing, ipleyiti etyhalayo, isihlalo esinesikhokelo esisezantsi, i-stator, i-rotor, isihlalo esiphezulu sesikhokelo, isanti, icandelo lokungena kwamanzi, intambo kunye nezinye izinto.

Iimpawu eziphambili zemveliso ziquka:

 I-1, i-motor ngamanzi azaliswe ngamanzi angaphantsi kwamanzi amanqanaba amathathu e-asynchronous motor, i-motor cavity igcwele amanzi acocekileyo, isetyenziselwa ukupholisa i-motor kunye nokuthambisa i-bearing, ifilimu elawula uxinzelelo ezantsi kwe-motor isetyenziselwa ukulungelelanisa. Ukwandiswa kunye nokwahlukana koxinzelelo loxinzelelo lwamanzi ngaphakathi emzimbeni obangelwa utshintsho lokunyuka kobushushu bemoto.

 I-2, Ukuthintela isanti kumanzi omthombo ekungeneni kwi-motor, isiphelo esiphezulu se-motor shaft sixhotywe ngamatywina amabini e-oyile, kunye nendandatho yesanti ifakwe ukwenza isakhiwo sokukhusela isanti.

 I-3, Ukuze uthintele i-shaft yepompo ukuba iqhube xa iqala, i-pump shaft kunye ne-motor shaft idibaniswe ngokudibanisa, kwaye i-top thrust bear ifakwe kwindawo engezantsi yemoto.

 I-4, I-lubrication ye-motor kunye ne-pump ephethe i-lubrication yamanzi.

 I-5, i-motor stator winding yenziwe nge-high-submersible motor winding wire, kunye nokusebenza okuphezulu kwe-insulation.

 I-6, ipompo yenzelwe i-CAD yekhompyutheni, kunye nesakhiwo esilula kunye nokusebenza kakuhle kwezobugcisa.

(1)Ulungiselelo phambi kofakelo:
1. Jonga ukuba impompo engaphantsi kwamanzi iyahlangabezana nemiqathango yokusetyenziswa kunye nobubanzi obuchazwe kwincwadana.
2. Ukusebenzisa i-obiect enzima ene-diameter elingana nobukhulu obungaphandle bedayamitha yempompo engaphantsi kwamanzi, linganisa ukuba i-inneldiameter ye-wellbore ingafanelana nempompo engaphantsi kwamanzi, kwaye ulinganise ukuba ubunzulu bomthombo buhlangabezana neemfuno zokufakela.
3. Jonga ukuba iqula licocekile na kunye nokuba amanzi amgxobhozo na. Ungaze usebenzise impompo yombane engaphantsi kwamanzi ukuhlamba udaka lwempompo ye-welor kunye namanzi esanti ukunqanda umonakalo ophambi kwexesha kwimpompo yombane engaphantsi kwamanzi.
4. Khangela ukuba indawo ye-welhead yokufakela i-clamp ifanelekile kwaye ingaba inokumelana nomgangatho weyunithi yonke.
5. Khangela ukuba izixhobo zempompo eziphantsi kwamanzi zigqityiwe kwaye zifakwe ngokufanelekileyo ngokwedayagram yendibano kwincwadana Susa isikrini sokucoca kwaye ujikelezise ukudibanisa ukuze ubone ukuba ijikeleza ngokuguquguqukayo.
6. Khupha isikrufu samanzi uze ugcwalise umngxuma wemoto ngamanzi acocekileyo, angadlekiyo (qaphela. qiniseka ukuba uyasifafa), uze uqinise isikrufu samanzi. Emva kweeyure ezili-12 zenaliti yamanzi, ukuxhathisa kwe-insulation ye-motor akufanele kube ngaphantsi kwe-150M Q xa kulinganiswa netafile yokungcangcazela ye-500V.
7. Umdibaniso wekheyibhile, unqumle umkhono werabha oyi-120mm kwelinye icala lentambo ephumayo kunye nentambo yokumatanisa enemela yomntu wombane uze ugxadazele ubude beengcingo ezintathu ezingundoqo ngendlela enyathelweyo, krazula umbindi wobhedu oyi-20mm, krazula ioksidi. umaleko ongaphandle kocingo lobhedu ngemela okanye ngelaphu lesanti, kwaye ufake iziphelo zocingo ezimbini eziqhagamshelweyo kwi palirs.Emva kokubopha umaleko ngokuqinileyo ngocingo olucolekileyo lobhedu, i-solder ngokucokisekileyo kwaye ngokuqinileyo, kunye nesanti yayo nayiphi na. amaqhuma phezu komhlaba. Emva koko, kumalungu amathathu, sebenzisa iteyiphu yokugquma i-polyvester ukuyisonga ngendlela epakishwe kabini kwizitya zokuhlambela ezintathu. Songa iziphelo ezibini zomaleko wokusonga ngokuqinileyo ngomsonto we-nyion, kwaye emva koko usebenzise indlela epakishwe kabini ukusonga iteyiphu kwiileya ezintathu. Songa i-outellayer ngetape yoxinzelelo oluphezulu lwe-insulation kwimigangatho emithathu. Ekugqibeleni, phinda udibanise imisonto emithathu kwaye uyibophe ngokuphindaphindiweyo kwi-fivelayers nge-tape yoxinzelelo oluphezulu. Umaleko ngamnye kufuneka ubotshelelwe ngokuqinileyo, kwaye amalungu e-interlayer kufuneka abe ngqongqo kwaye abe fimm ukukhusela amanzi ukuba angangeni kwaye wonakalise isigqubuthelo, Emva kokusonga, faka amanzi kwindawo yobushushu obungama-20 'c iiyure ezili-12, kwaye ulinganise ukuxhathisa ukugquma ngetafile eshukumayo. , ekufuneka ingabi ngaphantsi kwe-100M Ω

Umzobo oqhotyoshelweyo wenkqubo yokufaka iintambo zentambo umi ngolu hlobo lulandelayo:

8. Sebenzisa i-multimeter ukujonga ukuba ngaba iingcingo zesigaba sesithathu zidibaniswe kunye nokuba ukuchasana kwe-DC kuphantse kulinganiswe.
9. Khangela ukuba isekethe kunye nomthamo we-transformer ugcwele kakhulu, kwaye emva koko uqhagamshele i-switch yokukhusela okanye uqalise izixhobo. Jonga iTheyibhile yesi-2 kwiimodeli ezithile, kwaye emva koko galela ibhakethi lamanzi kwimpompo yamanzi ukusuka kwindawo yokupompoza amanzi ukuthambisa iibheringi zerabha kwimpompo, kwaye emva koko ubeke impompo yombane entywilayo ngokuthe tye kwaye izinzile.Qala (ungabi ngaphezu komzuzwana omnye) kwaye ujonge ukuba ngaba ulwalathiso lokuqhuba luyahambelana nophawu lokuqhuba. Ukuba akunjalo, tshintsha naziphi na izihlanganisi ezibini zesigaba sesithathu sentambo. Emva koko faka isihluzo kwaye ulungiselele ukuhla equleni. Ukuba isetyenziswe ngezihlandlo ezikhethekileyo (ezifana nemijelo, imisele, imilambo, amachibi, amachibi, njl. njl.), impompo yombane kufuneka isekelwe ngokuthembekileyo.

(2)Izixhobo zofakelo kunye nezixhobo:
1. Ipere enye yamatyathanga okuphakamisa ngaphezulu kweetoni ezimbini.
2. I-tripod enobude obuthe nkqo obungekho ngaphantsi kweemitha ezine.
3. Iintambo ezimbini ezijingayo (iintambo zocingo) ezinokuthwala ubunzima obungaphezu kwetoni enye (zinokuthwala ubunzima beseti epheleleyo yeempompo zamanzi).
4. Fakela izibini ezimbini zeeclamps (i-splints).
5. Izitshixo, izando, i-screwdrivers, izixhobo zombane kunye nezixhobo, njl.

(3)Ufakelo lwempompo yombane:
1. Umzobo wofakelo lwempompo yombane engaphantsi kwamanzi iboniswe kuMzobo 2. Imilinganiselo ethile yokufakela iboniswe kwiThebhile 3 "Uluhlu lweMilinganiselo yokuFakela iPump yoMbane ongaphantsi kwamanzi".

2. Iimpompo zombane ezingaphantsi kwamanzi ezinentloko engaphantsi kweemitha ezingama-30 zinokunyuswa ngokuthe ngqo equleni kusetyenziswa imibhobho kunye neentambo zocingo okanye ezinye iintambo zehemp ezinokuthwala ubunzima obupheleleyo bomatshini wonke, imibhobho yamanzi, kunye namanzi kwimibhobho.

3. Iipompo ezinentloko yeemitha ezingaphezu kwe-30 zisebenzisa iipayipi zensimbi, kwaye ulandelelwano lofakelo lulandelayo:
①Sebenzisa ibamba ukucinezela isiphelo esiphezulu sempompo yamanzi (injini kunye nempompo yamanzi sele idityanisiwe ngeli xesha), yiphakamise ngetsheyini ejingayo, kwaye uyibophe ngokukhawuleza equleni de ubeke isibambiso entloko kwaye uyisuse. ikhonkco elijingayo.
② Sebenzisa enye ipere yeziqhoboshi ukuqhobosha umbhobho, uwuphakamise ngetyathanga elijingayo 15 cm kude neflange, kwaye uwuhlise kancinane. Phakathi kweflange yombhobho kunye neflange yepompoFaka ipadi yerabha endaweni kwaye uqinise umbhobho kwaye umpompe ngokulinganayo ngeebholiti, iinati kunye newasher zasentwasahlobo.
③ Phakamisa kancinane impompo entywilayo emanzini, susa isithinteli esikwisiphelo esiphezulu sempompo yamanzi, qhina intambo ngokuqinileyo kumbhobho wamanzi ngeteyiphu yeplastiki, kwaye uyibophe kancinane de Ibamba libekwe emthonjeni.
④Sebenzisa indlela efanayo ukubopha yonke imibhobho yamanzi equleni.
⑤Emva kokuba ikhebula elikhokelayo liqhagamshelwe kwisitshixo solawulo, liqhagamshelwe kunikezelo lwamandla amanqanaba amathathu.

(4)Izinto ekufuneka uziqwalasele ngexesha lofakelo:
1. Ukuba i-jamming phenomenon ifunyenwe ngexesha lenkqubo yokupompa, jika okanye utsale umbhobho wamanzi ukuze unqobe i-jamming point. Ukuba imilinganiselo eyahlukeneyo ayisebenzi, nceda unganyanzeli impompo phantsi ukunqanda umonakalo kwimpompo yombane engaphantsi kwamanzi kunye nequla.
2. Ngethuba lofakelo, i-rubber pad kufuneka ifakwe kwi-flange yombhobho ngamnye kwaye iqiniswe ngokulinganayo.
3. Xa impompo yamanzi ithotywa equleni, kufuneka ibekwe embindini wombhobho wequla ukuthintela ukuba impompo ihambe ngaphaya kodonga lwequla ixesha elide, nto leyo ebangela ukuba impompo ingcangcazele kwaye imotor itshayele kwaye itshise. .
4. Qinisekisa ubunzulu bempompo yamanzi ukuya ezantsi kwequla ngokwesanti equkuqelayo kunye neemeko zentlenge equleni. Musa ukungcwaba impompo eludakeni. Umgama ukusuka kumpompo wamanzi ukuya ezantsi kwequla awukho ngaphantsi kweemitha ezi-3 (jonga umfanekiso 2).
5. Ubunzulu bokungena kwamanzi kwimpompo yamanzi kufuneka bungabi ngaphantsi kwe-1-1.5 yeemitha ukusuka kwinqanaba lamanzi aguquguqukayo ukuya kwindawo yokungena kwamanzi (jonga uMfanekiso 2). Ngaphandle koko, iibheringi zempompo zamanzi zinokonakala lula.
6. Ukunyuswa kwempompo yamanzi akunakuba phantsi kakhulu. Kungenjalo, ivalve yesango kufuneka ifakwe kumbhobho wamanzi osentloko yomthombo ukulawula ukuhamba kwempompo kwindawo yokuqukuqela ehleliweyo ukuthintela ukugcwala okugqithisileyo kwemoto kwaye itshiswe ngenxa yamazinga amakhulu okuhamba.
7. Xa umpompo wamanzi usebenza, ukukhutshwa kwamanzi kufuneka kuqhubeke kwaye nokuba, okwangoku kufuneka kuzinzile (phantsi kweemeko zokusebenza ezilinganisiweyo, ngokuqhelekileyo akukho ngaphezu kwe-10% ye-current rated current), kwaye akufanele kubekho ukungcangcazela okanye ingxolo. Ukuba kukho nakuphi na ukungaqhelekanga, umatshini kufuneka umiswe ukufumanisa unobangela kwaye upheliswe.
8. Xa ufaka, qwa lasela ukusetwa kwe-motor grounding wire (jonga umfanekiso 2). Xa umbhobho wamanzi ungumbhobho wentsimbi, yiholele kwi-clamp ye-wellhead clamp; xa umbhobho wamanzi ungumbhobho weplastiki, ukhokele ukusuka kwindawo yokubeka ipompo yombane.

1. 1.After the submersible electric pump is installed, recheck the insulation resistance and three-phase continuity from the switch, and check whether there are any errors in the connection of the instruments and starting equipment. If there are no problems, you can start the test machine. After starting, observe whether the indication readings of each instrument are correct. If the rated voltage and current specified on the nameplate are exceeded, observe whether the water pump has any noise or vibration. If everything is normal, it can be put into operation.
   2. Four hours after the water pump is operated for the first time, the motor should be stopped and the thermal insulation resistance tested quickly. The value should be no less than 0.5 megohms.
   3．After the water pump is stopped, it should be restarted after an interval of five minutes to prevent the water column in the pipe from flowing back completely and causing the motor to burn out due to excessive current.
   4. After the water pump is put into normal operation, in order to extend its service life, it is necessary to regularly check whether the power supply voltage, operating current and insulation resistance are normal. If the following conditions are found, the machine should be shut down immediately to eliminate the fault.
2. 
   ①Under rated working conditions, the current exceeds 20%.
   ② The dynamic water level drops to the water inlet section, causing intermittent water discharge.
   ③The submersible pump vibrates violently or makes loud noise.
   ④The power supply voltage is lower than 340 volts.
   ⑤One phase of the fuse is burned out.
   ⑥The water pipe is damaged.
   ⑦The thermal insulation resistance of the motor to the ground is less than 0.5 megohms.
3. 
   5. Unit disassembly:
   ① Untie the cable tether, remove the pipeline part, and remove the wire protection plate.
   ② Unscrew the water drain bolt and drain all the water in the motor cavity.
   ③Remove the filter and loosen the fixing screw on the coupling that fixes the motor shaft.
   ④ Unscrew the bolts connecting the water inlet section and the motor, and separate the water pump from the motor (pay attention to leveling the unit when separating to prevent the pump shaft from bending)
   ⑤The water pump disassembly sequence is: (see Figure 1) water inlet section, impeller, diversion shell, impeller... check valve body. When disassembling the impeller, use a special tool to first loosen the tapered sleeve that fixes the impeller. Avoid disassembly during the disassembly process. Bend the pump shaft and damage various parts.
   ⑥The motor disassembly process is: (See Figure 1) Place the motor on the platform, and remove the nuts, bases, shaft head locking nuts, thrust plates, keys, and lower guides on the stud bolts (tie rod bolts) in sequence from the bottom of the motor. bearing seat, stud bolts, and then take out the rotor (be careful not to
   If the wire package is damaged), finally remove the connecting section and upper guide bearing seat.
   ⑦Unit assembly:
   Before assembly, all parts should be cleaned of rust and dirt, and all mating surfaces and fasteners should be coated with sealant, and then assembled in the reverse order of disassembly (the amount of movement of the motor shaft after assembly is about one millimeter). After completion, the coupling should be flexible, and then put the filter on to test the machine.
4. 
   6． Every time the submersible electric pump is operated for one year, or if it is operated for less than one year but has been submerged for two years, it should be disassembled and inspected in accordance with Article 5 to replace worn parts.

 1, khupha amanzi kwi-motor cavity (ingakumbi ebusika ukukhusela i-motor ekukhenkceni), kwaye ubophe intambo kakuhle.

 2, gcina kwigumbi elingaphakathi elingenazo izinto ezonakalisayo kunye neegesi, ezinobushushu obungaphantsi kwama-40 °C.

 I-3, ukusetyenziswa kwexesha elide kufuneka kuhlawule ingqalelo ekuthinteleni umhlwa kweempompo ezingaphantsi kwamanzi.

01 Ukusela amanzi kwiqula elinzulu

02 Ubonelelo lwamanzi olukwizinga eliphezulu

03 unikezelo lwamanzi entabeni 

04 amanzi enqaba

05 Ukunkcenkceshela kwezolimo

06 ukunkcenkceshela egadini

07 amanzi omlambo

08 amanzi asekhaya