Pompa Submersible Sumur 250QJR

Nindakake pangolahan OEM! Miturut syarat pangguna, desain lan pabrik macem-macem jinis syarat khusus motor lan pompa submersible non-standar. Standar implementasi produk: GB / T2816-2014 "pompa submersible sumur", GB / T2818-2014 "motor asinkron sumur submersible". WhatsApp: 17855846335

KONTAK SAIKI PDF DOWNLOAD

Rincian

Tag

Ringkesan produk

The hot water pump adopts 50W400 grade high quality cold rolled silicon steel, stamped by high speed punch, with the advantages of low stator iron loss and low self-heating. The motor winding is specially designed for high temperature and anti-aging hot water motor. The winding is waterproof, and the high quality accessories such as 3CR13 stainless steel impeller shaft and high temperature durable bushing make it able to operate at high temperature for a long time, and can be used with frequency converter, which can be automatically adjusted according to the water consumption.

Katentuan Pangginaan supados langkung

1, sumber daya: telung fase AC 380V (toleransi + / - 5%), 50HZ (toleransi + / - 1%).

2, kualitas banyu:

(1) suhu banyu ora luwih saka 20 °C;

(2) isi impurities padhet (rasio massa) ora luwih saka 0,01%;

(3) Nilai PH (pH) 6,5-8,5;

(4) isi hidrogen sulfida ora luwih saka 1,5mg / L;

(5) isi ion klorida ora luwih saka 400mg/L.

3, motor ditutup utawa struktur udan sing diisi banyu, sadurunge nggunakake rongga motor submersible kudu kebak banyu sing resik, kanggo nyegah kebak palsu, banjur kenceng injeksi banyu, baut pelepasan udara, yen ora diijini nggunakake

4, pump submersible kudu rampung submerged ing banyu, ambane nyilem ora luwih saka 70m, ngisor pump submersible saka ngisor sumur ora kurang saka 3m.

5, aliran banyu sumur kudu bisa ketemu output banyu pump submersible lan operasi terus, output banyu pump submersible kudu kontrol ing 0,7 - 1,2 kaping aliran dirating.

6, sumur kudu lurus, pompa submersible ora bisa digunakake utawa dibuwang, mung nggunakake vertikal.

7, pompa submersible kudu cocog karo kabel miturut syarat, lan piranti pangayoman kakehan external.

8, pump wis strictly dilarang tanpa banyu tanpa mbukak mesin test

Arti Model

Read More About 110 volt deep well submersible pump

Referensi Model parsial

Model	Aliran (m3/jam)	sirah (m)	Kacepetan puteran (ganti/titik)	Pompa banyu (%)	Outlet diameteripun (mm)	Ditrapake kanthi apik diameteripun (mm)	Dirating power(KW）	Dirating tegangan (V)	Dirating saiki (A)	Efisiensi motor (%)	faktor daya φ	Unit Ukuran maksimal Radial (mm)	Tetembungane
250QJ50-40	50	40	2875	72	80	250ndhuwur	9.2	380	21.7	78.5	0.82	233
250QJ50-60		60					13		30.1	80.0	0.82
250QJ50-80		80					18.5		40.8	82.0	0.84
250QJ50-100		100					22		47.9	83.0	0.84
250QJ50-120		120					25		53.8	84.0	0.84
250QJ50-140		140					30		64.2	84.5	0.84
250QJ50-160		160					37		77.8	85.0	0.85
250QJ50-200		200					45		94.1	85.5	0.85
250QJ50-240		240					55		114.3	86.0	0.85
250QJ50-280		280					63		131.0	86.0	0.85
250QJ50-320		320					75		152.3	87.0	0.86
250QJ50-400		400					90		182.8	87.0	0.86
250QJ50-440		440					100		203.1	87.0	0.86
250QJ63-40	63	40	2875	74	80	250ndhuwur	11	380	25.8	79.0	0.82	233
250QJ63-60		60					18.5		40.8	82.0	0.84
250QJ63-80		80					22		47.9	83.0	0.84
250QJ63-100		100					30		64.2	84.5	0.84
250QJ63-120		120					37		77.8	85.0	0.85
250QJ63-160		160					45		94.1	85.5	0.85
250QJ63-200		200					55		114.3	86.0	0.85
250QJ63-220		220					63		131.0	86.0	0.85
250QJ63-260		260					75		152.3	87.0	0.86
250QJ63-300		300					90		182.8	87.0	0.86
250QJ63-360		360					100		203.1	87.0	0.86
250QJ80-20	80	20	2875	75	100	250ndhuwur	7.5	380	18.0	78.0	0.81	233
250QJ80-40		40					15		33.9	81.0	0.83
250QJ80-60		60					22		47.9	83.0	0.84
250QJ80-80		80					30		64.2	84.5	0.84
250QJ80-100		100					37		77.8	85.0	0.85
250QJ80-120		120					45		94.1	85.5	0.85
250QJ80-160	80	160	2875	75	100	250ndhuwur	55	380	114.3	86.0	0.85	233
250QJ80-180		180					63		131.0	86.0	0.85
250QJ80-200		200					75		152.3	87.0	0.86
250QJ80-240		240					90		182.8	87.0	0.86
250QJ80-280		280					100		203.1	87.0	0.86
250QJ100-18	100	18	2875	75	100	250ndhuwur	7.5	380	18.0	78.0	0.81	233
250QJ100-36		36					15		33.9	81.0	0.83
250QJ100-54		54					25		53.8	84.0	0.84
250QJ100-72		72					30		64.2	84.5	0.84
250QJ100-90		90					37		77.8	85.0	0.85
250QJ100-108		108					45		94.1	85.5	0.85
250QJ100-126		126					55		114.3	86.0	0.85
250QJ100-144		144					63		131.0	86.0	0.85
250QJ100-162		162					75		152.3	87.0	0.86
250QJ100-198		198					90		182.8	87.0	0.86
250QJ100-216		216					100		203.1	87.0	0.86
250QJ125-16	125	16	2875	76	125	250ndhuwur	9.2	380	21.7	78.5	0.82	233
250QJ125-32		32					18.5		40.8	82.0	0.84
250QJ125-48		48					25		53.8	84.0	0.84
250QJ125-64		64					37		77.8	85.0	0.85
250QJ125-80		80					45		94.1	85.5	0.85
250QJ125-96		96					55		114.3	86.0	0.85
250QJ125-112		112					63		131.0	86.0	0.85
250QJ125-128		128					75		152.3	87.0	0.86
250QJ125-160		160					90		182.8	87.0	0.86
250QJ125-176		176					100		203.1	87.0	0.86
250QJ125-192		192					110		219.6	87.5	0.87
250QJ140-15	140	15	2875	76	125	250ndhuwur	9.2	380	21.7	78.5	0.82	233
250QJ140-30		30					18.5		40.8	82.0	0.84
250QJ140-45		45					30		64.2	84.5	0.84
250QJ140-60		60					37		77.8	85.0	0.85
250QJ140-75		45					45		94.1	85.5	0.85
250QJ140-90		90					55		114.3	86.0	0.85
250QJ140-105	140	105	2875	76	125	250ndhuwur	63	380	131.0	86.0	0.85	233
250QJ140-120		120					75		152.3	87.0	0.86
250QJ140-150		150					90		182.8	87.0	0.86
250QJ140-165		165					100		203.1	87.0	0.86
250QJ140-180		180					110		219.6	87.5	0.87
250QJ200-20	200	20	2875	75	150	250ndhuwur	18.5	380	40.8	82.0	0.84	233
250QJ200-40		40					37		77.8	85.0	0.85
250QJ200-60		60					55		114.3	86.0	0.85
250QJ200-80		80					75		152.3	87.0	0.86
250QJ200-100		100					90		182.8	87.0	0.86
250QJ200-120		120					100		203.1	87.0	0.86
250QJ200-140		140					125		249.5	87.5	0.87

Pancegahan Safety

This well submersible pump is a clean water pump. It is strictly prohibited to dig new wells and extract sediment and turbid water. The voltage grade of the well pump is 380/50HZ. Other submersible motors with different voltage grades need to be customized. Underground cables must be waterproof and equipped with starting equipment, such as distribution boxes, etc. The starting equipment should have conventional comprehensive motor protection functions, such as short circuit overload protection, phase loss protection, undervoltage protection, grounding protection and idling protection. In abnormal cases, the protection device should be tripped in time. The pump must be reliably grounded when installed and used. It is prohibited to push and pull the switch when the hands and feet are wet. The power must be cut off before installation and maintenance of the pump. The place where the pump is used must be clearly marked with "anti-electric shock". Before going down the well or installation, the motor must be filled with distilled water or non-corrosive clean cold water. The intake/drain bolts must be tightened. When testing the pump on the ground, water must be added to the pump chamber to lubricate the rubber bearings. The instantaneous start should not exceed one second to check whether the direction is correct. This is also applicable to direction indication. When using the vertical electric pump, pay attention to safety to prevent overturning and injury. Strictly in accordance with the provisions of the pump lift and flow range of use, to prevent the pump in low lift has a large flow or high lift has a large pull, resulting in extreme wear of thrust bearings and other parts, so that the motor overload burned. After the pump into the well, the measurement of the insulation resistance between the motor and the ground shall not be less than 100MΩ. After the start, regular observation of voltage and current, and check whether the motor winding insulation meets the requirements of the provisions. If the pump storage location temperature is below freezing, the water in the motor cavity should be drained to prevent freezing in the motor cavity and damage the motor due to low temperature.

Pambuka kanggo Struktur

introduksi Brief saka struktur: bagean pump utamané dumadi saka poros pump, impeller, cangkang pangalihan, bantalan karet, mriksa awak tutup (bagian opsional) lan komponen liyane. Motor part utamané dumadi saka basa, meksa ngatur film, tikaman prewangan, tikaman piring, ngisor guide prewangan jog, stator, rotor, guide ndhuwur prewangan jog, wedhi ring, bagean welingan banyu, kabel lan komponen liyane.

Fitur utama produk kalebu:

1, Motor minangka motor asynchronous telung fase udan sing diisi banyu, rongga motor kebak banyu resik, digunakake kanggo kelangan motor lan pelumas bantalan, film pangaturan tekanan ing ngisor motor digunakake kanggo nyetel prabédan tekanan ekspansi lan kontraksi banyu ing njero awak disebabake owah-owahan suhu motor.

2, Kanggo nyegah wedhi ing banyu sumur mlebu motor, ujung ndhuwur poros motor dilengkapi rong segel minyak, lan cincin pasir dipasang kanggo mbentuk struktur pencegahan pasir.

3, Supaya batang pompa ora mlaku nalika diwiwiti, poros pompa lan poros motor disambungake kanthi kopling, lan bantalan dorong ndhuwur dipasang ing sisih ngisor motor.

4, Pelumasan motor lan bantalan pompa yaiku pelumasan banyu.

5, Motor stator nduwurke tumpukan digawe saka kualitas dhuwur submersible motor nduwurke tumpukan kabel, karo kinerja jampel dhuwur.

6, pump dirancang dening komputer CAD, karo struktur prasaja lan kinerja technical apik.

Read More About 110 volt deep well submersible pump

Instal

(1) Preparation sadurunge instalasi:
1. Priksa manawa pompa submersible cocog karo kahanan panggunaan lan ruang lingkup sing ditemtokake ing manual.
2. Nggunakake obiect abot karo diameteripun witjaksono menyang diameteripun njaba maksimum pump submersible, ngukur apa inneldiameter saka wellbore bisa pas pump submersible, lan ngukur apa ambane sumur meets syarat instalasi.
3. Priksa manawa sumur sumur resik lan banyu sumur keruh. Aja nggunakake pompa listrik submersible kanggo ngumbah lendhut pompa welor lan banyu pasir supaya ora rusak sadurunge pompa listrik submersible.
4. Priksa manawa posisi clamp instalasi welhead cocok lan apa bisa tahan kualitas kabeh unit
5. Priksa manawa komponen pompa submersible wis lengkap lan dipasang kanthi bener miturut diagram perakitan ing manual Copot layar panyaring lan puterake kopling kanggo ndeleng apa rotasi kanthi fleksibel
6. Copot sekrup banyu lan isi rongga motor kanthi banyu sing resik lan ora korosif (cathetan, manawa kanggo ngisi), banjur kencengake sekrup banyu. Sawise 12 jam injeksi banyu, ing resistance jampel saka motor ngirim ora kurang saka 150M Q nalika diukur karo 500V goyang meja.
7. Sambungan kabel, ngethok lengen karet 120mm saka siji ujung kabel sing metu lan kabel sing cocog karo piso tukang listrik banjur stagger dawa telung kabel inti ing wangun stepped, copot inti tembaga 20mm, scrape saka oksida lapisan ing njaba kabel tembaga karo piso utawa kain wedhi, lan masang loro kabel disambungake ends ing palirs.Sawise naleni lapisan tightly karo kabel tembaga nggoleki, solder iku sak tenane lan kuwat, lan wedhi sembarang. burrs ing lumahing. Banjur, kanggo telung joints, gunakake tape insulasi polyvester kanggo mbungkus kanthi cara setengah ditumpuk kanggo telung laver. Bungkus rong ujung lapisan bungkus kanthi kenceng karo benang nyion, banjur gunakake cara setengah ditumpuk kanggo mbungkus tape kanggo telung lapisan. Bungkus outellayer kanthi tape insulasi tekanan dhuwur kanggo telung lapisan. Pungkasan, lempitan telung untaian lan bola-bali bungkus limang lapisan kanthi tape tekanan dhuwur. Saben lapisan kudu tightly disambungake, lan joints interlayer kudu nyenyet lan fimm kanggo nyegah banyu saka penetrating lan ngrusak jampel, Sawise mbungkus, rendhem ing banyu ing suhu kamar saka 20 'c kanggo 12 jam, lan ngukur resistance jampel karo goyang meja. , sing ngirim ora kurang saka 100M Ω

Diagram proses pengkabelan kabel minangka nderek:
Read More About 4 inch deep well submersible pump

8. Gunakake multimeter kanggo mriksa apa kabel telung phase disambungake lan apa resistance DC kira-kira imbang.
9. Priksa manawa sirkuit lan trafo kapasitas overloaded, lan banjur nyambungake ngalih pangayoman kakehan utawa miwiti peralatan. Waca Tabel 2 kanggo model tartamtu, banjurPour ember banyu menyang kumpa banyu saka stopkontak pump banyu kanggo lubricate bantalan karet ing kumpa, lan banjur sijine pump listrik submersible mujur lan ajeg.Mulai (ora luwih saka siji detik) lan priksa manawa arah setir cocog karo tandha setir. Yen ora, ganti loro konektor kabel telung fase. Banjur pasang filter lan siyap mudhun sumur. Yen digunakake ing acara khusus (kayata selokan, selokan, kali, blumbang, blumbang, lan sapiturute), pompa listrik kudu dilebokake kanthi andal.

(2) Peralatan lan piranti instalasi:
1. Siji pasang rentengan ngangkat luwih saka rong ton.
2. Tripod kanthi dhuwur vertikal ora kurang saka patang meter.
3. Rong tali gantung (tali kawat) sing bisa nanggung bobot luwih saka siji ton (bisa nanggung bobot saka set lengkap pompa banyu).
4. Pasang rong pasang clamps (splints).
5. Kunci pas, palu, obeng, piranti lan piranti listrik, lsp.

(3) Instalasi pompa listrik:
1. Diagram instalasi pompa listrik submersible ditampilake ing Gambar 2. Dimensi instalasi spesifik ditampilake ing Tabel 3 "Dhaptar Dimensi Instalasi Pompa Listrik Submersible".

2. Pompa listrik submersible kanthi sirah kurang saka 30 meter bisa diangkat langsung menyang sumur nggunakake selang lan tali kawat utawa tali rami liyane sing bisa nanggung bobot kabeh mesin, pipa banyu, lan banyu ing pipa.

3. Pumps kanthi sirah luwih saka 30 meter nggunakake pipa baja, lan urutan instalasi kaya ing ngisor iki:
①Gunakake penjepit kanggo ngapit ujung ndhuwur bagean pompa banyu (motor lan pompa banyu wis disambungake ing wektu iki), angkat nganggo rantai gantung, lan alon-alon dasi menyang sumur nganti pasang clamp ing sirah sumur lan copot ranté gantung.
② Gunakake sepasang klem liyane kanggo njepit pipa, angkat nganggo rante gantung 15 cm adoh saka flange, banjur mudhunake alon-alon. Antarane flange pipe lan flange pumpLebokake pad karet ing panggonan lan kenceng pipa lan pompa roto-roto nganggo bolts, perkakas lan spring washers.
③ Angkat pompa submersible rada, copot clamp ing mburi ndhuwur pump banyu, dasi kabel kuwat menyang pipa banyu karo plastik tape, lan alon dasi mudhun nganti Clamp diselehake ing wellhead.
④Gunakake cara sing padha kanggo naleni kabeh pipa banyu menyang sumur.
⑤Sawise kabel timbal-metu disambungake menyang saklar kontrol, disambungake menyang sumber daya telung fase.

(4) Bab sing kudu digatekake sajrone instalasi:
1. Yen ana fenomena jamming nalika proses pumping, nguripake utawa narik pipa banyu kanggo ngatasi titik jamming. Yen macem-macem langkah isih ora bisa, please Aja meksa kumpa mudhun kanggo ngindhari karusakan ing pompa listrik submersible lan sumur.
2. Sajrone instalasi, pad karet kudu diselehake ing flange saben pipa lan tightened roto-roto.
3. Nalika pompa banyu diturunake menyang sumur, kudu diselehake ing tengah pipa sumur supaya pompa ora mlaku ing tembok sumur nganti suwe, nyebabake pompa kedher lan motor nyapu lan diobong. .
4. Nemtokake ambane pompa banyu ing ngisor sumur miturut kondisi pasir lan lempung sing mili. Aja ngubur pompa ing lendhut. Jarak saka pompa banyu menyang dhasar sumur umume ora kurang saka 3 meter (pirsani Gambar 2).
5. Ambane entri banyu saka pompa banyu kudu ora kurang saka 1-1,5 meter saka tingkat banyu dinamis menyang simpul inlet banyu (pirsani Gambar 2). Yen ora, bantalan pompa banyu bisa gampang rusak.
6. Angkat pompa banyu ora bisa sithik banget. Yen ora, katup gapura kudu dipasang ing pipa banyu sumur kanggo ngontrol aliran pompa ing titik aliran sing dirating kanggo nyegah motor kakehan lan kobong amarga tingkat aliran gedhe.
7. Nalika pompa banyu mlaku, output banyu kudu terus-terusan lan malah, arus kudu stabil (ing kondisi kerja sing dirating, umume ora luwih saka 10% saka arus sing dirating), lan ora ana getaran utawa gangguan. Yen ana kelainan, mesin kudu mandheg kanggo ngerteni sababe lan ngilangi.
8. Nalika nginstal, mbayar manungsa waé menyang setelan saka kabel grounding motor (ndeleng Figure 2). Nalika pipa banyu minangka pipa baja, mimpin saka clamp wellhead; nalika pipa banyu minangka pipa plastik, mimpin saka tandha grounding pompa listrik.

Maintenance lan Maintenance

（1）After the submersible pump is installed, check the insulation resistance and three-phase conduction from the switch again, check whether the instrument and the connection of the start equipment are wrong, if there is no problem, the trial machine can be started, and observe whether the indicator readings of the instrument exceed the rated voltage and current specified on the nameplate after the start, and observe whether the pump has noise and vibration phenomenon, and put into operation if everything is normal.
（2）After the first operation of the pump for four hours, the motor should be shut down to test the thermal insulation resistance quickly, and its value should not be less than 0.5 megaohm.
（3）After the pump is shut down, it should be started after five minutes to prevent the water column in the pipe from being completely reflowed and causing excessive motor current and burnout.
（4）After the pump is put into normal operation, in order to prolong its service life, it is necessary to check whether the supply voltage, working current and insulation resistance are normal regularly. If the following conditions are found, the pump should be shut down immediately to troubleshoot.
1 In the rated condition, the current exceeds 20%.
2 Tingkat banyu dinamis mudhun menyang bagean mlebu banyu, nyebabake banyu intermiten.
3 Pompa submersible duwe geter utawa swara sing abot.
4 Tegangan suplai luwih murah tinimbang 340 volt.
5 Sekring mati.
6 Pipa pasokan banyu rusak.
7 The motor's thermal insulation resistance is lower than 0.5 megaohm.
（5）Unit disassembly:
1 Untie the cable tie, remove the pipeline part, and remove the wire plate.
2 meneng mudhun bolt banyu, sijine banyu ing kamar motor.
3 mbusak Filter, ngeculke meneng tetep ing kopling kanggo ndandani batang motor.
4 meneng mudhun bolt nyambungake bagean welingan banyu karo motor, lan misahake kumpa saka motor (mbayar manungsa waé kanggo bantal unit nalika misahake, kanggo nyegah mlengkung saka batang pump)
5 urutan pembongkaran pompa yaiku: (pirsani gambar 1) bagean inlet banyu, impeller, cangkang pangalihan, impeller...... mriksa awak tutup, nalika njabut impeller, gunakake alat khusus kanggo ngeculake lengen kerucut sing tetep. impeller pisanan, lan supaya mlengkung lan bruising batang pump ing proses disassembly.
6 proses disassembly motor punika: (ndeleng tokoh 1) nyeleh motor ing platform, lan copot perkakas, basa, nut ngunci sirah poros, piring tikaman, tombol, jog prewangan guide ngisor lan bolt sirah pindho saka ngisor. motor ing siji, lan banjur njupuk metu rotor (pay manungsa waé ora kanggo ngrusak paket kabel) lan pungkasanipun mbusak bagean nyambungake lan guide ndhuwur prewangan jog.
7 unit perakitan: sadurunge perakitan, teyeng lan rereget saka bagean kudu di resiki, lan lumahing kawin lan fasteners ditutupi karo sealant, lan banjur nglumpuk ing urutan ngelawan saka disassembly (poros motor gerakane munggah lan mudhun sawise perakitan kanggo bab siji. millimeter), sawise perakitan, kopling kudu fleksibel, banjur mesin tes layar Filter. Pompa submersible kudu dijupuk metu saka sumur kanggo dismantling lan pangopènan miturut Artikel 5 sawise taun operasi, utawa kurang saka setahun operasi nanging rong taun wektu nyilem, lan bagean worn bakal diganti.

Panyimpenan lan Kustodian

This product is a submersible pump. In order to ensure that your equipment can work effectively for a long time, we provide the following suggestions: In winter, pay special attention to draining the water in the motor cavity to prevent freezing; roll up the cable and tie it well.When storage, select a room with a temperature below 40 °C and no corrosive substances or gases. When not in use for a long time, be sure to prevent the submersible pump from rusting.These simple methods will improve the service life and performance of the product, ensuring that you can fully enjoy the convenience and benefits it brings.

Nganggo Parts